|
|
|
|
|
|
|
|
|
|
Bosch / Detection Systems DMEP - Dummy dome, pendant pipe-mount
|
Bosch / Detection Systems DMEP2 - Dummy dome, pendant pipe-mount
|
|
|
|
|
|
|
|
|
|
|
|
|
Bosch / Detection Systems DMER - Dummy dome, in-ceiling mount
|
CBC (AMERICA) CORP CG-ZCD4000MM Dummy Dome Camera For 4000 Series Domes - CBC (AMERICA) CORP CG-ZCD4000MM
ZC-D4000 dome exterior that has been made into a dummy or fake security Cameraera.
|
|
|
|
|
|
|
|
|
|
|
|
CBC (AMERICA) CORP CG-ZCD5000MM Dummy Dome Camera Housing For 5000 Series - CBC (AMERICA) CORP CG-ZCD5000MM
Remove Cover as per your Mini Dome Camera Instruction Manual. Inside your camera, next to the Video output terminal you will see the NVT Twisted Pair module. The module is already preconnected to the coax output terminal Feed your twisted pair wire through the opening at 1the bottom of the camera body. Attach the twisted pair wires to the terminal block, observing wire color polarity.If the receiver is a model NV-652R, NV-452R, NV-862 or NC-3262 the green Active LED should have a steady light, indicating that video is present. A flickering light typically means that there is something wrong with the cabling.Connect the baseband video signal from the receiver to the video monitor (or other video equipment, multiplexer, quad, etc.) using a 75?? coax cable with a BNC connector.Confirm that your monitor or other receiving equipment is correctly terminated with a single 75?? terminator.For best pictures using the NV-652R, NV- 4 5 2 R,NC-1662“X” or NC-3262 “X”, adjust the distance
equalization controls.
|
8SD 8” Smoked Dome Use with real cameras too! Real or Simulated 8” Smoked Dome DQ-8SD 8” Smoked Dome
- Indoor Model
- Available for real camera use
- Includes 2 foot ceiling grid for drop ceiling
- Simulates real security cameras at fraction of the cost
|
|
|
|
|
|
|
|
|
|
|
|
|
Everfocus F8-ED00ZZBC Dummy Black Base Clear Dome Camera
|
UPC :697101002684
|
|
|
|
|
|
|
|
|
|
|
|
SECO LARM VD-20NN Dummy Dome Camera Incorporates A Realistic Camera Module To Give An Authentic Look Constructed Of Strong AVS Plastic - SECO LARM VD20NN
Important: SECO-LARM makes no warranties expressed or implied that dummy cameras will prevent any criminal or inappropriate activity. SECO-LARM disclaims any and all liability for any damages to property or persons as a consequence of the purchase or installation of dummy cameras. Neither SECO-LARM nor any of its officers, employees or resellers shall be subject to any liability arising out of the sale of this product. The purchaser assumes all risk and all liability arising out of the installation of dummy cameras.
Users and installers of this product are responsible for ensuring this product complies with all national, state, and local laws. SECO-LARM is not responsible for the use of this product in violation of any current laws or statutes
|
Videolarm OH081D - 8” Drop Ceiling dummy dome
|
|
|
|
|
|
|
|
|
|
|
|
The HT-INTD3 is a dome style weatherproof Intensifier Series camera, manufactured by Speco/Provideo, which can deliver super high resolution images without requiring IR LEDs to see in the dark. The HT-INTD3 dome style weatherproof Intensifier Series camera comes equipped with DIS, enhanced noise reduction circuitry, plus a 1/3" HQ-1 Sony CCD sensor. The HT-INTD3 dome style weatherproof Intensifier Series camera also features a resolution rate of 580 lines, HLC, relay outputs triggered by inbuilt video motion detection, as well as a 2.8-12mm auto iris lens, and S-DNR. This quality space saving, compact dome camera is suitable for areas where security installations are required for both day and night time surveillance.
Specifications:
Model HT-INTD3
Cameras have built-in web servers that work with Internet Explorer. No special software required for basic functionality and recording
Linux Operating System built into camera - No virus threats
Free DDNS Server
Dual Streaming: Cameras have both MPEG-4 and JPEG CODECS which allow you to choose between streaming or high quality video
Support of Dynamic and Static IP addresses
Changeable/Selectable Ports allow one IP address to handle multiple cameras
Premium software supplied at no extra cost for accessing advanced features
Remotely view up to 16 cameras in one window…from anywhere in the world!
Multiple levels of password protected remote access
Includes advanced IP locator software to make system setup easy
User adjustable settings for MPEG-4 and JPEG quality
Built in motion detection
Multiple Alarm handling capabilities
RS-232 pass through for control of many popular Speed Domes
Remotely upgradeable for software functions
Schedule Recording, per camera, per day, per hour
Selectable Resolutions: 704 x 480, 352 x 480, 352 x 240
Protocols: HTTP, FTP, TCP/IP, DHCP, ARP, DNS, ICMP,DDNS
Analog composite video output for local viewing
Up to 50 simultaneous users
|
Videolarm VL-OH081D 8" Drop Ceiling Dummy Dome
The OH081DTL is a general purpose ceiling mount compact 8" dome for fixed cameras. The smooth white body (which has a designer look) and the compact 8" dome are one piece integral construction. The unit is designed to replace a 2' x 2' ceiling tile. The OH081TL is also IP Ready, accepting network cameras. These units can be ordered as a dummy dome - with liner and dust cover but without a camera bracket (OH081D).
|
|
|
