 |
 |
 |
 |
ETHERWAN SYSTEMS ET-721290AB 2 Port 10/100TX 2 Port 1000LX Power 10-32V DC Terminal Block - ETHERWAN SYSTEMS ET-721290AB Designed for rugged environments, the EtherWAN Hardened EX72000 Series Switch comes with twelve 10/100Mbps RJ45 ports and two 100Base-FX or Gigabit ports in a package that offers several mounting options. The EX72000 functions at temperatures ranging from -40øC to 75øC (-40øF to 167øF) and is tested for functional operation @ -40øC to 85øC (-40øF to 185øF). Fully managed via SNMP, Web Browser, Telnet or Console port. The EX72000 is designed to integrate 10/100 Mbps networks into100Base-FX or Gigabit backbones. The Gigabit ports can be copper or fiber optic ports. The Hardened EX72000 series supports advanced features such as 802.1Q VLAN, MAC-based Trunking, IP-Multicast IGMP Snooping, Rapid Spanning Tree for Redundancy, QoS for priority queuing, and port mirroring. Users may choose among SNMP/RMON, Web browser, or Telnet for remote monitoring and configuration. It also supports rate control, which allows users to set the maximum bandwidth on each port individually. EtherWAN offers a line of products that provide a total solution for Ethernet applications in industrial and rugged environments.
- Technology
- -Standards:IEEE802.3 10Base-T,IEEE802.3u 100Base-TX/100Base-FX,IEEE802.3ab 1000Base-T,IEEE802.3z 1000Base-SX/1000Base-LX,IEEE802.3x, IEEE802.1p, IEEE802.1Q, IEEE802.1w, IEEE802.1x
- -Forward and Filtering Rate:14,880pps for 10Mbps 148,810pps for 100Mbps 1,488,100pps for 1000Mbps
- -Packet Buffer Memory:2M bits
- -Processing Type:Store-and-Forward Half-duplex back-pressure and IEEE802.3x full-duplex flow control
- -Address Table Size:8192 MAC addresses
- Power
- -Input:Input Voltage: 12 to 32VDC (Terminal Block); 12VDC (DC Jack)
- -Power Consumption:15W Max. 1.25A@12VDC, 0.625A@24VDC
- -Overload Current Protection:Present
- -Reverse Polarity Protection:Present
- Mechanical
- -Casing:Metal case IP 30
- -Dimensions:235mm (W) x 125mm (D) x 50mm (H) (9.25" (W) x 4.92" (D) x 1.97" (H))
- -Weight:1.5Kg (3.3lbs.)
- -Installation:DIN-Rail(Top hat type 35mm), Panel,Rack Mounting
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment
- Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment
- EtherWAN proprietary " -ring" support for network redundancy; recovery time <15ms
- IEEE802.1w RSTP, IEEE802.1S MSTP and IEEE802.1D STP compatible
- IP Multicast Filtering through IGMP Snooping V1, V2 & V3
- Supports port-based VLAN and IEEE802.1Q VLAN Tagging and GVRP
- IEEE802.1p QoS with four priority queues
- MAC-based trunking with automatic link fail-over
- RS-232 console, Telnet, SNMP V1, V2c & V3, RMON, Web Browser, and TFTP Management
- Supports Command Line Interface in RS-232 Console
- Supports IEEE802.1x Security
- Bandwidth Rate Control
- Per-port programmable MAC address locking
- Up to 24 Static Secure MAC addresses per port
- Port mirroring
- 8192 MAC addresses
- 2M bits buffer memory
- 1000Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
- Full wire-speed forwarding rate
- Redundant power inputs with Terminal Block and DC Jack
- -40øC to 75øC (-40øF to 167øF) operating temperature range
- Metal case
- Supports DIN-Rail, Panel, Rack Mounting installation
- Supports NTP
|
|
 |
 |
 |
 |
|
 |

|