 |
 |
 |
|
ETHERWAN SYSTEMS ET-960262A1A 6 Port 10/100TX 2 Port 100FX Power 10-31V DC Terminal Block - ETHERWAN SYSTEMS ET-960262A1A
The EX96000 series, managed, Ethernet switches are designed to operate in the harsh environments at the edge of the network. The EX96000 functions at temperatures ranging from -40øC to 75øC (-40øF to 167øF) and is tested for functional oparation @ -40øC to 85øC (-40øF to 185øF). Whether on the factory floor or the street corner, the EX96000 will provide flawless communications when you need it most. The EX96000 is a managed switch with the flexibility of eight 10/100 Ethernet ports that may be configured in various combinations of copper and fiber optic interfaces. To increase its flexibility a 9th port may be added that is a Gigabit Ethernet interface, configured with copper or fiber optics. Flexibility is a main feature of the EX96000 series product and it will fit any application that requires a tough, environmentally hardened Ethernet switch.
- Technology
- -Standards:IEEE802.3 10Base-T,IEEE802.3u 100Base-TX/100Base-FX,IEEE802.3ab 1000Base-T,IEEE802.3z 1000Base-SX/1000Base-LX,IEEE802.3x, IEEE802.1Q, IEEE802.1p, IEEE802.1w
- -Protocols:IGMP, GVRP, SNMP V1/V2, RMON, TFTP
- -Forward and Filtering Rate:14,880pps for 10Mbps 148,810pps for 100Mbps 1,488,100pps for 1000Mbps
- -Packet Buffer Memory:2M bits
- -Processing Type:Store-and-Forward Half-duplex back-pressure and IEEE802.3x full-duplex flow control
- -Address Table Size:4096 MAC addresses
- -Latency:Less than 9.6?s
- Power
- -Input:Input Voltage: 12 to 32VDC (Terminal Block); 12VDC (DC Jack)
- -Power Consumption:18.48W Max. 1.54A@12VDC, 0.77A@24VDC
- -Power Supply References:Terminal Block: 12 to 24VDC, 1.5A DC Jack: 12VDC, 3A
- -Overload Current Protection:Present
- -Reverse Polarity Protection:Present
- Mechanical
- -Casing:Metal case IP 20
- -Dimensions:50mm (W) x 125mm (D) x 135mm (H)(1.97" (W) x 4.92" (D) x 5.31" (H))
- -Weight:0.8Kg (1.76lbs.)
- Installation:DIN-Rail, Panel, Rack Mounting
- Interface
- -Ethernet Port:10/100Base-TX: 8, 6 or 4 ports 100Base-FX: 0, 1, 2 or 4 ports Gigabit: 0 or 1 port
- -Console Port:Port: One DB9 RS-232 port
- -LED Indicators:Power Status (Power 1, Power 2)
- Per Port: 10/100TX, 100FX: Link/Activity (Green), Speed (Yellow) 10/100/1000TX, 1000SX/LX: Link (Green), Activity (Yellow)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment
- UL 1604 Class 1, Division 2 Classified for use in hazardous locations(applicable to versions with terminal block power option)
- Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment
- IEEE802.1w RSTP and IEEE802.1D STP compatible
- IP Multicast Filtering through IGMP Snooping
- Supports port-based VLAN and IEEE802.1Q VLAN Tagging and GVRP
- IEEE802.1p QoS classification based on: Port-based priority; VLAN priority field in VLAN tagged frame; DS/TOS field in IP packet; UDP/TCP logical ports
- Eight port-based trunking groups with up to 8 ports per group
- Bandwidth Rate Control
- RS-232 console, Telnet, SNMP V1 & V2, RMON, Web Browser, and TFTP Management
- Packet Filtering and Port Security: Destination MAC; Static MAC address not subject to aging; Secure mode freezes MAC address learning
- Port mirroring
- 4096 MAC addresses
- 2M bits buffer memory
- 1000Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex, Auto-
- Negotiation, Auto-MDI/MDIX
- Full wire-speed forwarding rate
- Alarms for power failure by relay output
- Redundant power inputs with Terminal Block or DC Jack
- -40øC to 75øC (-40øF to 167øF) operating temperature range
- Metal case
- Supports DIN-Rail, Panel or Rack Mounting installation
|
|
|
|
|
|
|
|
|
