 |
 |
 |
 |
ETHERWAN SYSTEMS ET-EL900AN1A Converter1 Port 10/100TX 1 Port 100FX Power 10-32V DC - ETHERWAN SYSTEMS ET-EL900AN1A The EL900 series, Fast Ethernet media converters are designed to operate in harsh environments. The EL900 functions at temperatures ranging from -40øC to 75øC (-40øF to 167øF) and is tested for functional oparation @ -40øC to 85øC (-40øF to 185øF), Whether on the factory floor or the street corner, the EL900 will provide flawless communications when you most need it most. EL900 series are available in all types of fiber cabling and connector types. The RJ-45 port on this unit provides Auto-MDIX and auto-negotiation. The link-fault-pass-through feature allows the network management agent on adjacent equipment to react to a broken link. Flexibility is the main feature of the EL900, it may be DIN rail or panel mounted, and comes with power options to match the applications that require a tough, environmentally hardened, Fast Ethernet media converter.
- Standards:IEEE802.3 10Base-T,IEEE802.3u 100Base-TX/100Base-FX, IEEE802.3x
- Forward and Filtering Rate: 14,880pps for 10Mbps 148,810pps for 100Mbps
- Packet Buffer Memory:768K bits
- Processing Type:Store-and-Forward Half-duplex back-pressure and IEEE802.3x full-duplex flow control
- Address Table Size:2048 MAC addresses
- Latency:Less than 128.9?s
- Input:Input Voltage: 12 to 48VDC (Terminal Block); 12VDC (DC Jack)
- Power Consumption:* 9.12W MAX. 0.76A @ 12VDC, 0.38A @ 24VDC, 0.19A @ 48VDC
- Power Supply References:Terminal Block: 12 to 24VDC, 1.5A DC Jack: 12VDC, 3A
- Overload Current Protection:Present
- Reverse Polarity Protection:Present
- Casing:Aluminum case P30
- Dimensions:50mm (W) x 110mm (D) x 135mm (H)(1.97" (W) x 4.33" (D) x 5.31" (H))
- Weight:0.8Kg (1.76lbs.)
- Installation:DIN-Rail(Top hat type 35mm), Panel,Rack Mounting
- Ethernet Port:10/100Base-TX: 1 port
- -100Base-FX: 1 port
- LED Indicators:
- -Per Unit:Power Status (Power 1, Power 2, Fault),Link-Fault-Pass-Through
- -Per Port: 10/100TX: Link/Activity,Full-duplex/Collision, Speed
- -100FX: Link/Activity, Full-duplex/Collision
- Alarm Contact:One relay output with current 1A @ 24VDC
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment
- Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment
- UL 1604 Class 1, Division 2 Classified for use in hazardous locations (Applicable to versions with Terminal Block power option)
- DIP switch configuration for "Link-Fault-Pass-Through", link down alarm, speed, duplex mode
- 2048 MAC addresses
- 768K bits buffer memory
- 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
- Full wire-speed forwarding rate
- Alarms for power and port link failure by relay output
- Redundant power inputs with Terminal Block or DC Jack
- -40øC to 75øC (-40øF to 167øF) operating temperature range
- Hardened aluminum case
- Supports DIN-Rail, Panel or Rack Mounting installation
|
|
 |
 |
 |
 |
|
 |

|