You are here: Home > Shop Brands > Edco
We found 113 results matching your criteria.
Edco
Sort By:
Page of 10
EDCO EDCO EL-HCO Co Line Protector H Series - EDCO EDCO EL-HCO EDCO EDCO EL-PCB1BWKEY Universal Base For Card Edge Style Protectors - EDCO EDCO EL-PCB1BWKEY
EDCO EDCO EL-HCO Co Line Protector H Series - EDCO EDCO EL-HCO


The Edco H-Series modules are ultra high speed fused solid state secondary protectors for KEY/PABX systems. The units are available in three different clamping voltages. The Edco H-Series is constructed with solid state silicon foldback technology, polyswitch resettable fuses ? PTCs ? and failure fuses. These protection modules are intended to be used in conjunction with proper primary protectors (UL 497). The protective elements switch from the normal high-impedance state to a low-impedance state upon a detection of a surge, then switch back to high impedance after the surge has passed. The Edco H-Series single pair modules fit onto a standard Edco MI-50 split block and replace bridging clips. In addition, these modules require the Edco MGB Ground Rail for each Edco MI-50 block used

EDCO EDCO EL-PCB1BWKEY Universal Base For Card Edge Style Protectors - EDCO EDCO EL-PCB1BWKEY

EDCO EL-11604KTPC Dinrail Kit Hardware For The PC Series - EDCO EL-11604KTPC EDCO EL-5W830 Access Control Surge Protector Module - EDCO EL-5W830
EDCO EL-11604KTPC Dinrail Kit Hardware For The PC Series - EDCO EL-11604KTPC

EDCO EL-5W830 Access Control Surge Protector Module - EDCO EL-5W830

EDCO EL-642C008LC PC642C008LC Low Capacitance Suppressor - EDCO EL-642C008LC EDCO EL-642C020LC 2Pair Data/Signal Line Low Capacitance - EDCO EL-642C020LC
EDCO EL-642C008LC PC642C008LC Low Capacitance Suppressor - EDCO EL-642C008LC


The Edco PC642 Series surge suppressor is a two-pair (four-wire) module implementing three-stage hybrid technology. This module addresses over-voltage transients with gas tubes and silicon avalanche components. In addition, sneak and fault currents are mitigated with resettable fuses (PTCs). The PTCs increase resistance several orders of magnitude when over-currents exceed safe levels. A normal state resumes when over-currents are removed. The ability to self-restore in this manner significantly increases suppressor performance and survivability. The Edco PC642 card edge module is gold-plated, double-sided, and is designed to mate with the Edco PCB1B gold-plated female terminal connector. When snapped together, the data circuits ?pass thru? the protector in a serial fashion from the four ?Field Side? terminals to the four ?Electronics Side? terminals. Terminals 1 or 10 of the Edco PCB1B must be attached to Building-Approved Ground per Edco Technical Bulletin 2015

EDCO EL-642C020LC 2Pair Data/Signal Line Low Capacitance - EDCO EL-642C020LC


The Edco PC642 Series surge suppressor is a two-pair (four-wire) module implementing three-stage hybrid technology. This module addresses over-voltage transients with gas tubes and silicon avalanche components. In addition, sneak and fault currents are mitigated with resettable fuses (PTCs). The PTCs increase resistance several orders of magnitude when over-currents exceed safe levels. A normal state resumes when over-currents are removed. The ability to self-restore in this manner significantly increases suppressor performance and survivability. The Edco PC642 card edge module is gold-plated, double-sided, and is designed to mate with the Edco PCB1B gold-plated female terminal connector. When snapped together, the data circuits ?pass thru? the protector in a serial fashion from the four ?Field Side? terminals to the four ?Electronics Side? terminals. Terminals 1 or 10 of the Edco PCB1B must be attached to Building-Approved Ground per Edco Technical Bulletin 2015

EDCO EL-89D Punch Block Standoff - EDCO EL-89D EDCO EL-AC2120 120Volt Alarm/Sound/Video - EDCO EL-AC2120
EDCO EL-89D Punch Block Standoff - EDCO EL-89D

EDCO EL-AC2120 120Volt Alarm/Sound/Video - EDCO EL-AC2120

EDCO EL-CAT616R 16 Channel Hi Speed Data Line Protector Rack Mount - EDCO EL-CAT616R EDCO EL-CAT65POEF Cat6/Cat5 POE Female To Female Connectors - EDCO EL-CAT65POEF
EDCO EL-CAT616R 16 Channel Hi Speed Data Line Protector Rack Mount - EDCO EL-CAT616R


The Edco RM-CAT6 Series is a multi-channel high-speed data line protector that utilizes a three-stage hybrid design technology. This unit addresses high-energy voltage transients that can damage expensive computer equipment. Ideal for network switches and hubs, the Edco RM-CAT6 Series is easily mounted in close proximity to the protected equipment

EDCO EL-CAT65POEF Cat6/Cat5 POE Female To Female Connectors - EDCO EL-CAT65POEF


The Edco CAT6-PoE is designed to work on Category 5 Power-over-Ethernet transmission lines as well as Category 6 applications. It is ideal to protect expensive equipment against surges and transients entering a building on exposed transmission lines. The Edco CAT6-PoE is available in both female to female and male to female RJ-45 connectors

EDCO EL-CAT65POEM Cat6/Cat5/POE Surge Protectors Male To Female - EDCO EL-CAT65POEM EDCO EL-CATV-DF Surge Protector Catvdf - EDCO EL-CATV-DF
EDCO EL-CAT65POEM Cat6/Cat5/POE Surge Protectors Male To Female - EDCO EL-CAT65POEM


The Edco CAT6-PoE is designed to work on Category 5 Power-over-Ethernet transmission lines as well as Category 6 applications. It is ideal to protect expensive equipment against surges and transients entering a building on exposed transmission lines. The Edco CAT6-PoE is available in both female to female and male to female RJ-45 connectors

EDCO EL-CATV-DF Surge Protector Catvdf - EDCO EL-CATV-DF


The Edco CATV?DF surge protectors are designed to protect sensitive electronic equipment from damage due to excessive voltage or currents generated by lightning or static build-up. It offers low signal loss at frequencies up to 2 gigahertz and incorporates GDT (gas discharge tube) technology. Applications include direct broadcast satellite systems, HDTV, and cable modems

   
 
Edco
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please