 |
 |
 |
|
The Genesis line of signals are the smallest, most compact audible and visible emergency signaling devices in the world. About the size of a deck of playing cards, these devices are designed to blend with any building environment. Edwards Genesis horn/strobes do not require bulky specular reflectors. Instead, an exclusive mask-and-cavity design, channels and conditions light to produce a highly controllable distribution pattern. Intensive development employing this new technology have given rise to a new benchmark in strobe performance--FullLight technology.
The EG1-HDVM series horn/strobes offer 15 to 110 candela output,l which is selectable with a conveniently-located switch on the side of the device. The EG1-HDVMH series offers 95 to 177 candela output. The candela output setting remains clearly visible even after final installation, yet it stays locked in place to prevent unauthorized tampering. Its horn output reaches as high as 99 dB and features a unique multiple frequency tone that results in excellent wall penetration and an unmistakable warning of danger. Horns may be configured for either coded or non-coded signal circuits. They can also be set for low dB output with a jumper cut that reduces horn output by 5 dB.
When installed with the Cat. No. EG1M Signal Master, strobe flashes from devices on the same circuit are synchronized to within 10 milliseconds of each other indefinitely. The Signal Master also permits independent horn control over a single pair of wires. Only one Signal Master is required per circuit. No separate backbox--simply snap it onto the back of the first signal on the circuit.
Specifications:
Housing: Red or white textured UV stabilized, color impregnated engineered plastic. Exceeds 94V-0 UL flammability rating.
Lens: Optical grade polycarbonate (clear)
Mounting (indoor only):
Strobes and horn-strobes are for wall-mount installation only. Horn-only models may be ceiling- or wall-mounted
Flush mount: 2˝ inch (64 mm) deep one-gang box
Surface mount: Model 27193 surface mount box, wiremold box, or equivalent surface-mount box
With optional trim plate: One-gang, two-gang, four-inch square, octagonal, or European single-gang box
Wire connections: Screw terminals: single input for both horn and strobe. #18 to #12 AWG (0.75 mm˛ to 2.5 mm˛) wire size
Operating environment: Indoor only: 32-120°F (0-49°C) ambient temperature. 93% relative humidity
Agency listings/approvals: UL 1971, UL 1638, UL 464, ULC S525, ULC S526, CSFM, CE, FCC, MEA.
Dimensions (HxWxD):
Signal: 4-1/2" x 2-3/4" x 13/16" (113 mm x 68 mm x 21 mm)
Trimplate: 5" (127 mm); Height - 5-7/8" (149 mm); Depth - ˝" (13 mm)
Operating voltage: EG1-HD series temporal-tone horns: non-coded, filtered 16-33 Vdc or unfiltered 16-33 Vdc FWR (or coded when horn set to steady tone)
Strobe output rating:
UL 1971, UL 1638, ULC S526: selectable 15 cd, 30 cd, 75 cd, or 110 cd output
UL 1971: 15 cd (fixed 15/75 cd models)
UL 1638, ULCS526: 75 cd (fixed 15/75 cd models)
Synchronization Sources: EG1M-RM, EBPS6A, EBPS10A, E-FSA64, E-FSA250, E-FSC 3, 5 and 10 zone.
Horn pulse rate: EG1-HD temporal-tone horns and EG1-HDVM series temporal-tone horn-strobes: temporal rate synchronized with
optional EG1M Genesis Signal Master indefinitely within 10 milliseconds. EG1-P steady-tone horns: continuous, steady
tone only
Temporal audible pattern: ˝ sec ON, ˝ sec OFF, ˝ sec ON, ˝ sec OFF, ˝ sec ON, 1˝ sec OFF, then repeat cycle
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Unique low-profile design
- Attractive appearance
- Ultra-slim - protrudes less than one inch from wall
- No visible mounting screws
- Exclusive FullLight® Strobe Technology
- Low current draw
- 15/30/75/110 and 95-177 candela output models
- High (default) or low dB horn
- Temporal (default) or steady horn
- Public mode flash rate (default) or private mode temporal flash
|
|
|
|
|
|
|
|
|
