You are here: Home > Access Control > Egress Devices
We found 3 results matching your criteria.

McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

Egress Devices

  Crash Bars, Exit Bars, Panic Bars and Push Bars
  Door Release
  Key Switches
  PIR for Access Control
  Request to Exit
Door-Controls for Passages of Exit
Crash Bars, Exit Bars, Panic Bars and Push Bars
Crash Bars, Exit Bars, Panic Bars and Push Bars
Door Release
Door Release
Key Switches
Key Switches
PIR for Access Control
Request-to-Exit PIR
Request to Exit
Request to Exit
Sort By:
Page of 1
Honeywell / Ademco 4116 Vantage Keyswitch Kit Optex LRP180QH 595' X 13' Super Long Range Pir W/ Heater - LRP180QH
Honeywell / Ademco 4116 Vantage Keyswitch Kit Optex LRP180QH 595' X 13' Super Long Range Pir W/ Heater - LRP180QH


The MegaRed? is the world?s first dual output external ?super? long-range PIR detector. Ideal for large perimeter installations, the sensor provides separate ?near? and ?far? alarm outputs allowing the sensor to position an intruder in its field of view. When used with pan and tilt or dome cameras, the alarm outputs can be used to automatically position a camera to an area. Wiring to the detector from its controller can be made in two core cable. This two core carries power to the sensor, near and far alarm information and tamper simultaneously. Due to their extended range and narrow fields of view, MegaRed? detectors should only be used over flat terrain.
The MegaRed? features a unique system to minimise cable and installation costs while maximising installation distance between detector and controller. The controller provides three separate relay outputs for near detection, far detection and tamper output and can be situated either at the detector head or in the control centre. The controller can be situated up to 800m away from the sensor

Optex MegaRed 180QH LRP180QH - Super Long Range Outdoor PIR Detector
FEATURES
  • Dual zone outputs
  • 180m (500') x 4 m (12') coverage
  • 60mA power consumption
  • Twin quad element detectors
  • Simple system integration
  • Gold coated mirrors
  • Easy alignment
  • IP66 rated
  • Integral mounting bracket
  • High RFI/EMI immunity
  • Twin electronic processors

    CONCEPT
    The MegaRed is the world's first dual output external long range passive infrared detector for external operation at ranges of up to 180 metres.

    MegaRed is designed for use with CCTV systems to alert an operator's attention to a specific area or, with the zoned outputs, to activate positioning of a dome or pan and tilt camera system. It is also ideal for the activation of video transmission systems.

    OPERATION
    Detection is achieved by monitoring changes of far infrared levels between an intruder and the background in the detector's twenty four fields of view. The sensor's pair of twin electronic processors use dual edge sensing techniques to achieve detection and, when combined with the two four-in-line quad element sensors, provide exceptional operational stability.

    INSTALLATION
    Installation and set-up is made easy with the LRP1020 Walktester, which allows the MegaRed to be aimed accurately and will also provide the installer with information regarding the stability of the sensor. The integral mounting bracket allows the sensor to be wall or post mounted and the head to be adjusted through a full 180 degrees. The comprehensive use of screening and de-coupling techniques gives the detector high immunity to RFI and EMI interference. As a singie ended device it does not require a secondary unit to be installed at the far end of the area to be protected, thereby reducing installation time and cost.

    APPLICATIONS
    The MegaRed is ideal for use as a motion detector in conjunction with CCTV. It can be used to alert an operator's attention to movement in a specific area, activate recording equipment on alarm or be used to initiate alarms from an external site connected to a central station via video transmission equipment.

    MegaRed can operate in total darkness and can therefore be used to simultaneously control lighting in the protected area when used with an LRP 101 Interswitch controller. This allows lighting loads of up to 1200 watts to be operated on alarm and contains an on-board photocell, lights 'on' timer and 220/240 V AC or 110 V AC to 12 V DC power supply to power the detector.

    The Megared features a unique system to minimise cable and installation costs while maximising installation distance between detector and controller. The controller provides three separate relay outputs for near detection, far detection and tamper output and can be situated either at the detector head or in the control centre. Two-core cable is required for connection between the detector and controller and carries detector power, tamper and alarm information. The controller can be situated up to 800m (2500') away from the sensor when connected by 1.5mm (AWG14) twin cable. Simple cabling and exceptional range make Megared the ideal choice for the protection of large sites.

  •    
     
    Egress Devices
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please