Home > Shop Brands > Elk > M1 Control Family > M1 Control Family Accessories >

  Elk ELK-M1XZW - M1 Z-Wave Interface

Elk ELK-M1XZW - M1 Z-Wave Interface


Our Price : $118.61

Product Code: 1882763

Discontinued Please Call or Email for Replacement

The ELK-M1XZW is a radio transceiver interface designed to allow an M1 Controller to interface with Z-Wave enabled devices. Z-Wave technology is a wireless bi-directional communications network consisting of devices such as: Plug-in Dimmer Modules, Wall Mount Switches and Dimmers, Plug-in Appliance Modules, Motion/Occupancy Sensors, and HVAC Thermostats. The M1XZW interface functions as a Z-Wave Secondary Controller OR as a Z-Wave Static Update Controller (SUC) for holding the Z-Wave system setup programming. The interface connects to the M1 RS-485 data bus and is enrolled and identified as a Type 5 Expander. As such, it may be remotely located anywhere along the RS-485 data bus within the maximum stated distance limits. The housing is designed for wall mounting and includes mounting screws and anchors. Z-Wave is a trademark of Zensys, Inc.

M1 Controllers can be programmed to control Z-Wave network devices based on any number of events using the powerful rules engine. These events include, but are not limited to:
-Alarm System Arm Status
-Status of Alarm System Sensors such as door contact, motion sensors, etc.
-Task Activation
-Sunrise /Sunset Light/Dark
And More...

M1 Controllers can also control Z-wave network devices remotely. The M1Gold Control features a built-in, telephone remote control. With the M1XEP Ethernet Interface, both the M1Gold and M1EZ8 can control Z-Wave enabled devices over the internet, without the need for a dedicated, "24/7" server.


  • Flash Memory for Firmware Updating

  • Connects to the M1 Data Bus - RS-485

  • LED Indicators for Status and Programming

  • Push Button "Copy" Program Switch

  • For Indoor Use Only


  • Signal (Frequency): 908.42 MHz

  • Range: Up to 100 feet (line of sight) to closest Z-Wave enabled product

  • Operating Voltage: 12 Volts D.C.

  • Operating Temperature Range: 32-105 degrees F 
    (0 - 40 degrees C)

  • Current Draw: approx. 60 mA

  • Housing Dimensions: 4.25" x 6.375" x 2.125"

  • Circuit Board Dimensions: 2.25" x 3.95"

Accessory or Possible Replacement
ELK-M1XSLZW M1 to Leviton Z-Wave Interface

Our Price : $142.99

ELK-M1XSLZW  M1 to Leviton Z-Wave Interface

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Elk > M1 Control Family > M1 Control Family Accessories
Home Automation > Z-Wave Technology Products

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please