You are here: Home > Shop Brands > Linear > Encore Digital Audio Distribution System
We found 11 results matching your criteria.
Encore Digital Audio Distribution System
Sort By:
Page of 1
CHANNEL PLUS/MULTIPLEX ENC-DRSFA-SL-4 F/G RM STA ALM FACE PLATE CHANNEL PLUS/MULTIPLEX ENC-DRSFA4 F/G RM STA ALM FACE PLTS 4PK
F/G RM STA ALM FACE PLATE F/G RM STA ALM FACE PLTS 4PK
Linear 2171-4: Single-head IR Emitter (4-pack) - 21714 Channel Plus by Linear ENC-DRS: Keypad - ENCDRS

The Model 2171-4 Single-head Infrared (IR) Emitters are supplied in a package of four and are used with the Model ENC-HUB Audio Distribution System, ENC-SIWP source input or ENC-LIWP local input wall plates. These generic emitters can also be used with Linearís video hubs, 2100A and 2010 in-wall interface, or with a 5500 series IR enabled modulator connected to a video hub.

Each emitter contains a tiny infrared LED housed in a miniature, black appearing, injection molded plastic shell. The emitters have adhesive backing for mounting. An emitter can be installed directly on the IR sensor window of the controlled source component or in a suitable nearby location.

An IR emitter repeats IR remote control signals received at a room station keypad or IR target from a handheld IR remote control. When an IR signal is detected at a target, the signal is sent to the IR OUT jacks on the wall plates or device. An IR emitter connected to the IR OUT jack, repeats the same IR signal to the source component. This allows IR remote control of source components that are located away from the IR target.

The Model ENC-DRS Keypad serves as a speaker zone controller for the Model ENC-HUB Audio Distribution System Hub. Up to four ENC-DRS Keypads can be connected to each hub. Each keypad in the system selects its speaker zone's audio source, controls the volume, tone, balance, loudness, and all other functions of the system. The ENC-DRS contains a Class D digital stereo amplifier providing up to 100 watts maximum output power (50 watts per channel at <1% THD into a 4-ohm impedance load) and is designed to connect to a pair of 4, 6, or 8-ohm speakers.

The keypad connects to the ENC-HUB with Cat-5 cable and mounts in a single-gang J-box (minimum 2-3/4" unobstructed depth required). For maximum output installations, four independent high current power supply outputs are provided on the hub for supplying dedicated keypad power through 2-conductor 16 gauge wire.

At each speaker zone, a ENC-DRS Keypad selects between the four primary hub audio sources from Model ENC-SIWP Source Input Wall Plates, or from its local audio source connected to the Model ENC-LIWP Local Input Wall Plate.

The system features IR remote control. An infrared repeater system monitors the infrared receivers at each keypad and repeats the infrared remote control signals to the audio source components through infrared emitters connected to the input plates. IR emitters are sold in a 4-pack as Model 2171-4.

Linear ENC-HUB: Audio Distribution System Hub - ENCHUB Linear ENC-KIT-M: Encore Digital Audio Distribution System 4-Source 4-Zone Kit - LN-ENCKITM
Linear ENC-HUB: Audio Distribution System Hub - ENCHUB
List Price: $355.83

Our Price : $218.47

You save $137.36!

The Model ENC-HUB Audio Distribution System Hub is an expandable digital audio system that distributes four analog or digital audio sources over Cat-5 cable to four independent speaker zones. Each speaker zone features a backlit keypad with a built-in digital amplifier that selects the audio source and controls the volume, tone, balance, loudness, and all other functions of the system. The system can be expanded with up to eight hubs for a total of 32 speaker zones. The hub is powered by a Model ENC-PS Power Supply.

Model ENC-DRS Keypads serve as a speaker zone controllers for the system. Up to four ENC-DRS Keypads can be connected to each hub. The keypad contains a Class D digital stereo amplifier with 80 watts maximum output power (40 watts per channel in a 6-ohm load) and is designed to connect to a pair of 6-ohm or 8-ohm speakers.

Model ENC-SIWP Source Input Wall Plates serve as a primary audio source inputs and wire directly to the hub. Up to four ENC-SIWP wall plates can be connected to each hub. Model ENC-LIWP Local Input Wall Plates serve as a local audio source input at each speaker zone. The ENC-LIWP wall plate connects directly to a keypad. The keypads select between the four primary hub audio sources from ENC-SIWP wall plates, or from a local audio source connected to the ENC-LIWP wall plate. A high quality analog-to-digital converter encodes analog sources to digital audio for the system. All system connections are with Cat-5 cable, the keypads and both types of wall plates mount in a single-gang J-boxes.

The system features IR remote control. An infrared repeater system monitors the infrared receivers at each keypad and repeats the infrared remote control signals to the audio source components through infrared emitters connected to the wall plates. IR emitters are sold in a 4-pack as Model 2171-4.

Two remote controls are available. The Model ENC-REM Micro Remote Control is a miniature unit that can select the audio source, control the zone's power, volume, and mute the speakers. The larger Model ENC-LRM Advanced Learning Remote has all of the features of the basic remote with the addition of a built-in IR code library and IR learning capability allowing it to control virtually any audio source component. The learning remote also has macro capabilities that allow programming multiple key sequences.

The Model ENC-KIT-M Digital Audio Distribution System 4-Source 4-Zone Kit offers the basic components needed to assemble a four room music distribution system. The kit includes:

(1) - Model ENC-HUB Audio Distribution System Hub
(1) - Model ENC-PS Power Supply
(4) - Model ENC-DRS Keypads
(4) - Model ENC-SIWP Source Input Wall Plates
(1) - Model ENC-DRSFW4 Faceplates, 4-pack, White
(1) - Model 2171-4 Single-head IR Emitter, 4-pack
(1) - Model ENC-REM Micro Remote
(1) - Model H275 Universal Mounting and Wire Management Bracket

The kit provides four rooms of amplified music distribution from the Model ENC-HUB Audio Distribution system Hub; four speaker zone controllers with the Model ENC-DRS Keypads, IR control of four audio source components with the Model 2171-4 Single-Head IR Emitters, system remote control with the Model ENC-REM Micro Remote, and a mounting solution with the H275 Universal Mounting and Wire Management Bracket.

Linear ENC-LIWP: Local Input Wall Plate - ENCLIWP Linear ENC-LRM: Advanced Learning Remote Control - ENCLRM

The Model ENC-LIWP Local Input Wall Plate serves as a local audio source input for the Model ENC-HUB Audio Distribution System Hub. It provides a connection point for a local audio source in the same room as the speaker zone, such as an MP3 player, computer, television, or game box. A high quality analog-to-digital converter encodes analog sources to digital audio for the system.

The local input wall plate connects directly to a Model ENC-DRS Keypad with Cat-5 cable and mounts in a single-gang J-box. At each speaker zone, the keypad selects between its local audio source from a ENC-LIWP wall plate, or from the four primary hub audio sources connected to Model ENC-SIWP Source Input Wall Plates.

The ENC-LIWP features two sets of stereo RCA analog audio inputs, a coaxial digital audio input, an SPDIF optical digital audio input, an IR emitter output jack, a source selector switch, gain switches, and a clipping indicator. The analog Input #1 has a special override feature. When an audio signal is detected on this input, the wall plate will override audio signals at any of the Input #2 sources. When the audio signal on Input #1 ceases, about 10 seconds later the wall plate will switch back to an Input #2 source. The source switch is for Input #2, it selects between the coaxial digital, optical digital, and analog stereo Input #2.

For low level signals, two sets of gain switches are provided to boost the signal by 4, 8, or 10 db. The clipping indicator will light if the signal level is too high.

The system features IR remote control. An infrared repeater system monitors the infrared receivers at each keypad and repeats the infrared remote control signals to the audio source components through infrared emitters connected to the wall plates. IR emitters are sold in a 4-pack as Model 2171-4.

The ENC-LRM Advanced Learning Remote is an infrared remote control for use with Linear's Encore Digital Audio Distribution System. The remote control sends infrared control signals to the infrared receiver in Model ENC-DRS keypads. In addition to controlling the system's power, the ENC-LRM remote can select the audio source, adjust the volume, and mute the sound for the keypad's speaker zone. The six keys at the bottom of the remote are dedicated to operating the Encore system.

This remote control can also be programmed to send IR commands to hundreds of makes and models of audio and video equipment. IR codes can also be "learned" into the ENC-LRM remote control from another manufacturer's IR remote control. The components can then be controlled using a single remote. Three buttons are reserved for macros. Each button can be programmed for an automatic key sequence of up to 19 steps.

The system features IR remote control. An infrared repeater system monitors the infrared receivers at each keypad and repeats the infrared remote control signals to the audio source components through infrared emitters connected to the wall plates.

Linear ENC-PS: Power Supply - ENCPS Linear ENC-REM: Micro Remote - ENCREM
The Model ENC-PS Power Supply is a new or replacement power supply for the Model ENC-HUB Audio Distribution System Hub. This switching power supply is designed for structured wiring grid mounting in Linear's structured wiring enclosures and the Model H275 Universal Mounting and Wire Management Bracket. An AC line cord connects the 120 VAC supply, a two-terminal low voltage connector on the 26 VDC output connects to the ENC-HUB Audio Distribution System Hub. An internal green power indicator lights when the supply is operating and is visible through the unit's case vents.

The Model ENC-REM Micro Remote is an infrared remote control for use with Linear's Encore Digital Audio Distribution System. The remote control sends infrared signals to the infrared receiver in Model ENC-DRS Keypads.

In addition to controlling the system's power, the ENC-REM remote can select the audio source, adjust the volume, and mute the sound for the keypad's speaker zone.

linear ENC-SIWP: Source Input Wall Plate - ENCSIWP

The Model ENC-SIWP Source Input Wall Plate serves as a primary audio source input for the Model ENC-HUB Audio Distribution System Hub. It provides a connection point for components such as receivers, tuners, CD players, and computers. A high quality analog-to-digital converter encodes analog sources to digital audio for the system.

The source input wall plate connects directly to the hub with Cat-5 cable and mounts in a single-gang J-box. Up to four ENC-SIWP wall plates can be connected to each hub. At each speaker zone, a Model ENC-DRS Keypad selects between the four primary hub audio sources from ENC-SIWP wall plates, or from a local audio source connected to the Model ENC-LIWP Local Input Wall Plate.

The ENC-SIWP features a stereo RCA analog audio input, a coaxial digital audio input, an SPDIF optical digital audio input, an IR emitter output jack, a source selector switch, gain switches, and a clipping indicator. The source switch selects between the coaxial digital, optical digital, and analog stereo inputs.

For low level signals, a set of gain switches is provided to boost the signal by 4, 8, or 10 db. The clipping indicator will light if the signal level is too high.

The system features IR remote control. An infrared repeater system monitors the infrared receivers at each keypad and repeats the infrared remote control signals to the audio source components through infrared emitters connected to the wall plates. IR emitters are sold in a 4-pack as Model 2171-4.

   
 
Encore Digital Audio Distribution System
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please