CM-1190-7212 Flush Mount Key Switch, DPDT Maintained with Red & Green 12V LEDs Mounted on Faceplate

CAMDEN DOOR CONTROLS, CM-1100 and CM 2000 Series flush mount key switches meet the stringent demands of key switch controls. They are designed for use with standard 1", 1 1⁄8 ", or 1 1⁄4 " mortise cylinders. Fabricated from 1⁄4 " thick aluminum, into a one piece die cast construction, with unique Camden Manufacturing features.

CM-1100 is single gang (2 3⁄4 ") width, CM-2000 is only 1 3⁄4 " wide, perfect for door frames or narrow areas. Both models accept one or two switches, and have a counter sunk cylinder opening, in a one piece casted assembly. A brass cylinder lock ring, 2 socket/slotted screws, and 2 tamperproof screws, are also supplied. (The mortise cylinder is available separately from Camden Door Controls.) The design and construction makes it ideal for all-weather environments. The assembly is tamper and vandal resistant.

CM Key Switches are flexible, and can be supplied in numerous switch configurations to suit varied commercial and industrial applications, and functions. CAMDEN Key Switches provide a practical, cost effective means for authorized personnel to control and signal various functions within a complex.

CM-1100 and CM-2000 Series Key Switches will control overhead doors, electric locks, electro-magnetic locks, electric strikes, and motors. They are also used for shunting, bypassing, timed functions, activating and deactivating CCTV and access control equipment, and other applications. They are constructed for high frequency use, and will accept a standard mortise cylinder.

• Single gang and narrow style models
• Accepts standard mortise cylinders, 1" – 1 1⁄4 "
• Heavy duty 1⁄4 " thick aluminum plate
• 1 piece die cast construction
• Locators prevent cylinder from spinning
• No set screws required
• Vandal resistant
• Cylinder sits flush to faceplate
• Tamper proof screws provided
• Indoor or outdoor applications
• UL/CSA approved switches
• 1 OR 2 switches may be installed
• Left and/or right operation
• Wide range of switch configurations
• Color coded 18 AWG soldered leads
• Heat shrink protective sleeve over contacts
• Casted centre rib protects switches from damage
• Brushed aluminum finish
• Custom color finishes engraving available
• Optional led indicators
• Fast & easy to install
• Optional 1-60 second DPST pneumatic time delay

CM-190/2 Mini Aluminum Faceplate, On/Off/Hold Open

A Toggle Switch is a simple effective means for controlling automatic doors.

• Mini aluminum or stainless steel single gang models
• Two or three position operation

CM-2020-7212 Narrow Key Switch, Momentary, N/O & N/C with Red and Green 12V LEDs Mounted on Faceplate

CAMDEN DOOR CONTROLS, CM-1100 and CM 2000 Series flush mount key switches meet the stringent demands of key switch controls. They are designed for use with standard 1", 11⁄8 ", or 11⁄4 " mortise cylinders. Fabricated from 1⁄4 " thick aluminum, into a one piece die cast construction, with unique Camden Manufacturing features.

CM-1100 is single gang (23⁄4 ") width, CM-2000 is only 13⁄4 " wide, perfect for door frames or narrow areas. Both models accept one or two switches, and have a counter sunk cylinder opening, in a one piece casted assembly. A brass cylinder lock ring, 2 socket/slotted screws, and 2 tamperproof screws, are also supplied. (The mortise cylinder is available separately from Camden Door Controls.) The design and construction makes it ideal for all-weather environments.The assembly is tamper and vandal resistant.

CM Key Switches are flexible, and can be supplied in numerous switch configurations to suit varied commercial and industrial applications, and functions. CAMDEN Key Switches provide a practical, cost effective means for authorized personnel to control and signal various functions within a complex.

CM-1100 and CM-2000 Series Key Switches will control overhead doors, electric locks, electro-magnetic locks, electric strikes, and motors. They are also used for shunting, bypassing, timed functions, activating and deactivating CCTV and access control equipment, and other applications. They are constructed for high frequency use, and will accept a standard mortise cylinder.

CM-2030-7212 Narrow Key Switch, SPDT Maintained with Red and Green 12V LEDs Mounted on Faceplate

CAMDEN DOOR CONTROLS, CM-1100 and CM 2000 Series flush mount key switches meet the stringent demands of key switch controls. They are designed for use with standard 1", 1 1⁄8 ", or 1 1⁄4 " mortise cylinders. Fabricated from 1⁄4 " thick aluminum, into a one piece die cast construction, with unique Camden Manufacturing features.

CM-1100 is single gang (2 3⁄4 ") width, CM-2000 is only 1 3⁄4 " wide, perfect for door frames or narrow areas. Both models accept one or two switches, and have a counter sunk cylinder opening, in a one piece casted assembly. A brass cylinder lock ring, 2 socket/slotted screws, and 2 tamperproof screws, are also supplied. (The mortise cylinder is available separately from Camden Door Controls.) The design and construction makes it ideal for all-weather environments.The assembly is tamper and vandal resistant.

CM Key Switches are flexible, and can be supplied in numerous switch configurations to suit varied commercial and industrial applications, and functions. CAMDEN Key Switches provide a practical, cost effective means for authorized personnel to control and signal various functions within a complex.

CM-1100 and CM-2000 Series Key Switches will control overhead doors, electric locks, electro-magnetic locks, electric strikes, and motors. They are also used for shunting, bypassing, timed functions, activating and deactivating CCTV and access control equipment, and other applications. They are constructed for high frequency use, and will accept a standard mortise cylinder.

CM-2030-7224 Narrow Key Switch, SPDT Maintained with Red and Green 24V LEDs Mounted on Faceplate

CAMDEN DOOR CONTROLS, CM-1100 and CM 2000 Series flush mount key switches meet the stringent demands of key switch controls. They are designed for use with standard 1", 1 1⁄8 ", or 1 1⁄4 " mortise cylinders. Fabricated from 1⁄4 " thick aluminum, into a one piece die cast construction, with unique Camden Manufacturing features.

CM-1100 is single gang (2 3⁄4 ") width, CM-2000 is only 1 3⁄4 " wide, perfect for door frames or narrow areas. Both models accept one or two switches, and have a counter sunk cylinder opening, in a one piece casted assembly. A brass cylinder lock ring, 2 socket/slotted screws, and 2 tamperproof screws, are also supplied. (The mortise cylinder is available separately from Camden Door Controls.) The design and construction makes it ideal for all-weather environments.The assembly is tamper and vandal resistant.

CM Key Switches are flexible, and can be supplied in numerous switch configurations to suit varied commercial and industrial applications, and functions. CAMDEN Key Switches provide a practical, cost effective means for authorized personnel to control and signal various functions within a complex.

CM-1100 and CM-2000 Series Key Switches will control overhead doors, electric locks, electro-magnetic locks, electric strikes, and motors. They are also used for shunting, bypassing, timed functions, activating and deactivating CCTV and access control equipment, and other applications. They are constructed for high frequency use, and will accept a standard mortise cylinder.

CM-2060-7224 Narrow Key Switch, (2) SPDT Maintained with Red and Green 24V LEDs Mounted on Faceplate

CAMDEN DOOR CONTROLS, CM-1100 and CM 2000 Series flush mount key switches meet the stringent demands of key switch controls. They are designed for use with standard 1", 1 1⁄8 ", or 1 1⁄4 " mortise cylinders. Fabricated from 1⁄4 " thick aluminum, into a one piece die cast construction, with unique Camden Manufacturing features.

CM-1100 is single gang (2 3⁄4 ") width, CM-2000 is only 1 3⁄4 " wide, perfect for door frames or narrow areas. Both models accept one or two switches, and have a counter sunk cylinder opening, in a one piece casted assembly. A brass cylinder lock ring, 2 socket/slotted screws, and 2 tamperproof screws, are also supplied. (The mortise cylinder is available separately from Camden Door Controls.) The design and construction makes it ideal for all-weather environments.The assembly is tamper and vandal resistant.

CM Key Switches are flexible, and can be supplied in numerous switch configurations to suit varied commercial and industrial applications, and functions. CAMDEN Key Switches provide a practical, cost effective means for authorized personnel to control and signal various functions within a complex.

CM-1100 and CM-2000 Series Key Switches will control overhead doors, electric locks, electro-magnetic locks, electric strikes, and motors. They are also used for shunting, bypassing, timed functions, activating and deactivating CCTV and access control equipment, and other applications. They are constructed for high frequency use, and will accept a standard mortise cylinder.

CM-2090-7212 Narrow Key Switch, DPDT Maintained with Red and Green 12V LEDs Mounted on Faceplate

CAMDEN DOOR CONTROLS, CM-1100 and CM 2000 Series flush mount key switches meet the stringent demands of key switch controls. They are designed for use with standard 1", 1 1⁄8 ", or 1 1⁄4 " mortise cylinders. Fabricated from 1⁄4 " thick aluminum, into a one piece die cast construction, with unique Camden Manufacturing features.

CM-1100 is single gang (2 3⁄4 ") width, CM-2000 is only 1 3⁄4 " wide, perfect for door frames or narrow areas. Both models accept one or two switches, and have a counter sunk cylinder opening, in a one piece casted assembly. A brass cylinder lock ring, 2 socket/slotted screws, and 2 tamperproof screws, are also supplied. (The mortise cylinder is available separately from Camden Door Controls.) The design and construction makes it ideal for all-weather environments.The assembly is tamper and vandal resistant.

CM Key Switches are flexible, and can be supplied in numerous switch configurations to suit varied commercial and industrial applications, and functions. CAMDEN Key Switches provide a practical, cost effective means for authorized personnel to control and signal various functions within a complex.

CM-1100 and CM-2000 Series Key Switches will control overhead doors, electric locks, electro-magnetic locks, electric strikes, and motors. They are also used for shunting, bypassing, timed functions, activating and deactivating CCTV and access control equipment, and other applications. They are constructed for high frequency use, and will accept a standard mortise cylinder.

CM-250/1 Plain Faceplate Narrow Pushbutton

CAMDEN DOOR CONTROLS CM-250 Series push switches are light-duty, ADA-compliant door controls. The 1 3⁄4 " x 4 1⁄2 " faceplates are stainless steel, and the assembly is designed for easy installation directly in the door jamb (or use optional surface box). The SPDT switches are UL/CSA approved, and rated 15 amps @ 125V AC. 1-5/8"

Camden 1" push button switches are designed to control electric locks & strikes, magnetic locks, automatic pedestrian & overhead doors. They may also be used for shunting, bypassing alarms, request to exit, timed functions and many other applications. Camden switches are versatile and can be supplied in various logos and languages to suit any commercial, industrial or residential application.

All CM-250 series push switches are complete ready-to-install assemblies. They are supplied with matching stainless steel mounting screws and wire terminals.

CM-3000/40 Single Gang Brushed Aluminum Faceplate