 |
 |
 |
|
The Falcon MA Series lock delivers high performance at an affordable cost in your office, hospital, education or other commercial projects. One of Falcon's toughest, most dependable locks, the MA Series provides security and is built to stand up to constant use without fail. The MA Series also makes retrofit easy with an interchangeable core that can be removed for quick, easy re-keying and is compatible with SFIC products from other manufacturers. And they're backed by one of the best names in the business.
Falcon MA Series is available in several design combinations; "G" Gala rose or "N" Napa escutcheon and "H" Hana knob designation or four levers "A" Avalon, "D" Dane, "Q" Quantum and "S" Sutro. When specifying, example: AN, Avalon A) lever - with Napa (N) escutcheon.
- Provide mortise locksets that comply with ANSI A156.13, Series 1000, Operational Grade 1 and Security Grade 1 with all standard trims and conventional mortise cylinders
- Locksets comply with UL10B - neutral pressure and UL10C/UBC 7-2 - positive pressure testing requirements. All locks shall be UL listed for 3 hour fire door
- Lock case shall be non-handed, reversible without opening the lock case, and shall be manufactured of zinc dichromate plated steel. Lock case shall be interchangeable for knob or lever applications without modifying the chassis, and shall be constructed with a screw configuration that limits access to operating parts
- Latchbolt shall be 2-piece anti-friction type manufactured from stainless steel, with a standard 2-3/4" backset, a full 3/4" throw and be field reversible. Deadbolt shall have 1" throw and shall be constructed of stainless steel, incorporating two 3/16" diameter security roller pins
- All trim shall be cast, forged, or wrought and through-bolted with thread patch coated screws. Lever trim to have individual heavy duty springs for lever return, and independent rotation in both directions. Return to door style levers meets the 1/2" California State Fire Marshall requirement
- Spindles to be independent, designed to 'break-away' at a maximum of 480 in./lbs. to prevent damage to the lock chassis
- Provide standard non-handed curved lip strikes
- Cylinders to be secured by a dual retainer
- Acceptable manufacturer: FALCON Lock
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Door thickness: Standard accommodates thickness of 1-3/8" to 2-1/2"
- Backset: 2-3/4" only
- Case: Cold formed steel, zinc dichromate plated, .090" thick. Optional lead wrapping available
- Hubs: Hardened steel
- Handing: Right hand is standard; left hand optional. Reversible in the field
- Cylinders: Solid brass cylinder and plug. 5, 6 or 7-pin are available on standard cylinders. 6 or 7-pin are available on interchangeable core cylinder. Furnished with two nickel silver keys standard
- Keyways: "G" keyway standard on standard cylinder. "A" keyway standard on I/C cylinder. See price book for optional keyways
- Bind Resistant Trim: Heavy-duty through-bolted inserts clamp the trim on the door assuring proper alignment. Provided with 8-32 screws for strength and thread sealant to prevent loosening
- Latch Bolt: Two-piece stainless steel, mechanical anti-friction bolt. 3/4" projection
- Dead Bolt: 1" throw, stainless steel with two 13/16" diameter hardened steel, free-turning, saw-resistant roller
- Faceplates: (Armored Front) 1-1/4" x 8" brass or stainless steel adjustable for door bevel. Reinforced by heavy gauge steel with stabilizing ribs
- Strike: Brass or stainless steel. Meets ANSI AII5.1 for frame preparation. Strike is non-handed
- Electrified Functions: Available in 12 or 24 VDC
- ANSI/BHMA: Meets ANSI/BHMA 156.13, Series 1000
- UL: 3 hour A label
- Finish: Satin Brass
|
|
|
|
|
|
|
|
|
