You are here: Home > Fire Alarms >

Fire Accessories for Fire Alarm Systems

We found 9 results matching your criteria.

McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

Fire Accessories for Fire Alarm Systems


 

Accessories for Fire Alarm Systems

 

Enclosures for Fire Alarm Systems

 

Fire Annunciators for Fire Alarm Systems

 

Fire Extinguisher for Fire Alarm Systems

 

Panic & Pull Stations for Fire Alarm Systems

 

Power Supplies for Fire Alarm Systems

 

Smoke Detector Testers for Fire Alarm Systems

 

Stoppers & Damage Protection for Fire Alarm Systems

Security Store USA offers a wide choice of fire equipment and accessories including fire annunciators, fire extinguishers, as well as smoke detector testers. The fire accessories will enable you to optimize your fire system, helping to reduce and even eliminate damage to property and danger to people due to fire.

Accessories for Fire Alarm Systems

Accessories for Fire Alarm Systems

Enclosures for Fire Alarm Systems

Enclosures for Fire Alarm Systems

Fire Annunciators for Fire Alarm Systems

Fire Annunciators for Fire Alarm Systems

Fire Extinguisher for Fire Alarm Systems

Fire Extinguisher for Fire Alarm Systems

Panic & Pull Stations for Fire Alarm Systems

Panic & Pull Stations for Fire Alarm Systems

Power Supplies for Fire Alarm Systems

Power Supplies for Fire Alarm Systems

Smoke Detector Testers for Fire Alarm Systems

Smoke Detector Testers for Fire Alarm Systems

Stoppers & Damage Protection for Fire Alarm Systems

Stoppers & Damage Protection for Fire Alarm Systems
Sort By:
Page of 1
HSI VT-Kit-1 Professional Test Kit with 16ft Telescoping Test Pole and 4ft Extension SDI 2S-DUCT01 ductchecker Duct Detector Tester
VT-Kit-1 Professional Test Kit with 16ft Telescoping Test Pole and 4ft Extension

VT-Kit1 Kit Includes:

  • 1 - VT-1 Aerosol Dispenser
  • 1 - 16ft Telescoping Test Pole
  • 1 - 4ft Adapter for additional reach
  • 1 - Professional Equipment Bag

  • The Perfect Service & Maintenance Test Kit to Test Smoke and CO Detectors
  • UL/ULC Listed, Registered #372844, #3728441, #3728383
  • The easiest way to Meet NFPA 72 and International Fire Code Compliance
  • Versa-Test™ Dispenser Accepts Multiple Can Sizes
  • Versa-Poles™ are Durable, Lightweight, Non-Conductive Fiberglass
  • Designed with Safety in mind: No ladders, No climbing, No reaching

    VTKit1

  • SDI Fire & Security Alarm System Tools

    The ductchecker and dbchecker are ideal for the maintenance of fire and security alarm systems.

    Ideal for Fire and Security Alarm System Maintenance The ductchecker and dbchecker from SDI are ideal for the maintenance of fire and security alarm systems. The ductchecker is an easy-to-use tool perfect for testing duct detectors to ensure they sample airstream properly, according to manufacturer’s instructions and required by the National Fire Protection Association. This portable, battery operated device includes hard case and sampling tube plugs, making it convenient for initial and semiannual duct detector testing.
    • Simple to Use
    • Portable
    • Battery Operated
    • Meets NFPA 72 Requirements
    • Perfect for Annual and Semi-Annual Testing
    • Easy to Read Display

    Yuasa / EnerSys YA-NP712 Rechargeable 12 Volt Sealed Lead Acid Battery (7 AMP) Ademco / Honeywell 5140MPS-1 - Manual Pull Station with Terminal Block
    Yuasa / EnerSys UZ-NP712 Rechargeable 12 Volt Sealed Lead Acid Battery (7 AMP) Features:
    • Aluminum die cast
    • Key reset and test
    • Screw terminals
    • Gold contact SPST
    • ADA compliant
    • UL, CSFM, MEA listed and approved

    Ademco's manual fire alarm stations are designed to be non-code single action devices for use in UL listed fire-alarm applications. The attractive die-cast aluminum-alloy housing meets ADA pull requirements and has been tested at Underwriter's Laboratory.

    For ADA compliance, manual stations must be mounted less than 48o anove the floor for front wheelchair access and less than 54o above the floor for side wheelchair access.

    A key reset feature on the 5140MPS-1 is designed for positive authorized resetting action. The key is designed to operate and match Ademco controls. The 5140MPS-1 utilizes a terminal block for secure terminations. The 5140MPS-2 is furnished with an Allen hex fitting and is equipped with wire leads.

    Two alarm deterrant break tubes are supplied with each manual station; one tube is visible from the front and the spare is stored in a compartment within the unit.

    Operation

    Pulling the handle down causes the manual stations to latch in the down position and to close the normally open switch. The handle is restored manually by using the key to unlock the station and pivot the station forward for resetting the pull handle to its normal position. The crush tube is then inserted into the cavity the station assembly is then locked in the normal upright position.

    Construction

    The 5140MPS-1 and 5140MPS-2 manual stations are contructed of a durable die-cast aluminum-alloy and provide a neat and distinctive appearance. The housing is finished in red with white raised lettering and the "T-bar" handle is white with raised red lettering for enhanced visibility. The units are adaptable to both surface and semi-flush mounting configurations.

    Mounting

  • Semi-Flush Mount
    Most semi-flush mount installations can be attached to a standard single-gang switch box using two 6-32 screws inserted through the slots that are centered on the unit's metal mounting plate.

  • Semi-Flush Mount
    Use Ademco Backbox model no. 5140MPS-BB for surface mount installations. The Backbox has four pre-drilled mounting holes of 0.187 inch diameter and conduit knockouts. Secure the Backbox to a wall with screws of size 8 or smaller. After the Backbox is in place, attach the conduit.

    The housing is locked by using a key or Allen wrench lock. Unlock the housing by turning the key clockwise and swinging down the front of the housing to make the sheet metal mounting plate accessible. Mount the metal plate to the Backbox using the four 1/4" long 8-32 screws (suuplied).

  • Dimensions: 4.75"H x 3.12"W x 2"D
  • Camden CM-702 2x N/C Pull for Door Release Blue Pull Station Signal Communications SG-32SK1 - DUAL ACTION PULL STATION RED

    2x N/C Pull for Door Release Blue Pull Station

    CAMDEN DOOR CONTROLS, CM-700 series pull stations meet the stringent demands of emergency pull station controls. They are designed for single gang mounting and protrude only 3/4” from the wall. They are easily reset with a small screwdriver. Available in blue, red or yellow, they are an ideal solution for varied pull station requirements.

    Camden Door Controls, CM-700 series pull stations are the ideal solution wherever an emergency release is required. Applications include Fire Alarm, Door Release and Emergency Alarm.

    Features:
    • Available in English, French or bilingual
    • Clear lift cover optional
    • One or two switches, N/O, N/C or both
    Description

    The SG-32 Series is a family of versatile, high-quality, metal Fire Alarm Pull Stations (red) designed to meet any installation demand. Available in both single and dual action configurations, SG-32 may be configured with either SPST or DPST contacts. A terminal strip for field connections is provided. The normally open contact of each station, which closes when the pull station is activated, is rated for 1 Amp, 30VDC. The contacts are gold plated to avoid risk of corrosion. All models in the SG-32 Series have been tested by ULI and found in compliance to the latest requirements of the American’s With Disabilities Act (ADA).
    SG-32 stations from Signal Communications Corporation are available with either hex locks or key reset. Key reset models are available for interchangeable keys. All models mount on a standard, single-gang backbox, SigCom model SGB-32S interior surface metal backbox or model SGB-32C, (SG-WP) weatherproof backbox.
    SG-32 Series stations are also available in optional colors (other than red) for special application.

    Operation

    The SG-32 Series is operated by pulling the handle marked “PULL” on the front of the station as far down as it will go. At that point, the station will lock in place and is easily visible from up to 50 feet. The activation handle is reset by opening the station with the hex wrench or key, placing the handle in the normal upright position and relocking the station. On the dual action, the push bar rotates inward allowing the “PULL” handle to be grasped and operated by a single hand.

    Features
    • Single or Dual Action
    • Terminal Connections
    • Gold Plated Alarm Contacts
    • Surface or Weatherproof Backbox
    • Optional Auxiliary Alarm Contacts
    • Optional Station Colors

    Specifications
    Temperature: -40 to 150F, 90o relative humidity @ 100oF
    Switch Rating: 1 Amp @ 30 VDC 1 Amp @ 125 VAC
    Pull Station Dimensions: 4 3/4” H x 3 1/4” W x 1.1” D
    Surface-mount Backbox Dimension: 4 3/4” H x 3 1/4” W x 2 1/4” D (cast and sheet metal)
    Color: Red with raised white letters, white “PULL” bar with raised red letters
    Optional Colors: Blue, Yellow or Green

    Signal Communications SG-32SK2 - PULL STATION SINGLE ACTION Signal Communications ST-BKP01 - PULL STATION COVER BACK PLATE
    Description

    The SG-32 Series is a family of versatile, high-quality, metal Fire Alarm Pull Stations (red) designed to meet any installation demand. Available in both single and dual action configurations, SG-32 may be configured with either SPST or DPST contacts. A terminal strip for field connections is provided. The normally open contact of each station, which closes when the pull station is activated, is rated for 1 Amp, 30VDC. The contacts are gold plated to avoid risk of corrosion. All models in the SG-32 Series have been tested by ULI and found in compliance to the latest requirements of the American’s With Disabilities Act (ADA).
    SG-32 stations from Signal Communications Corporation are available with either hex locks or key reset. Key reset models are available for interchangeable keys. All models mount on a standard, single-gang backbox, SigCom model SGB-32S interior surface metal backbox or model SGB-32C, (SG-WP) weatherproof backbox.
    SG-32 Series stations are also available in optional colors (other than red) for special application.

    Operation

    The SG-32 Series is operated by pulling the handle marked “PULL” on the front of the station as far down as it will go. At that point, the station will lock in place and is easily visible from up to 50 feet. The activation handle is reset by opening the station with the hex wrench or key, placing the handle in the normal upright position and relocking the station. On the dual action, the push bar rotates inward allowing the “PULL” handle to be grasped and operated by a single hand.

    Features
    • Single or Dual Action
    • Terminal Connections
    • Gold Plated Alarm Contacts
    • Surface or Weatherproof Backbox
    • Optional Auxiliary Alarm Contacts
    • Optional Station Colors

    Specifications
    Temperature: -40 to 150F, 90o relative humidity @ 100oF
    Switch Rating: 1 Amp @ 30 VDC 1 Amp @ 125 VAC
    Pull Station Dimensions: 4 3/4” H x 3 1/4” W x 1.1” D
    Surface-mount Backbox Dimension: 4 3/4” H x 3 1/4” W x 2 1/4” D (cast and sheet metal)
    Color: Red with raised white letters, white “PULL” bar with raised red letters
    Optional Colors: Blue, Yellow or Green

    SigCom’s Sentry Station cover is a rugged, poly-carbonate cover used to help protect manual pull stations and other devices from false alarms, vandalism, dust and weather. It is available in a variety of configurations to satisfy most applications.
    The SENTRY is the only station cover designed specifically for compliance with all applicable ADA requirements (Americans with Disabilities Act; 28 CFR Part 36). SENTRY can be operated with just one hand and involves no tight grasping, pinching or twisting of the wrist. The force required to operate the cover has been tested by Underwriter’s Labs for compliance with the 5 lbf pull force. SENTRY is uniquely designed to protrude less than 4 inches into halls, corridors, etc. no matter the height at which it is installed. Yet most surface mount pull stations are easily installed behind a SigCom Sentry Cover. When operated, the SENTRY cover lowers to a full 180º providing unobstructed access to the alarm station.
    Units with the optional alarm module can be used as false alarm deterrents in applications such as: schools, libraries, etc. When installed, the alarm module will emit a piercing scream when the cover is opened. This startling noise will help to deter most malicious pranksters and to indicate the location of the problem.
    A weatherproof kit is available which will allow the unit to be installed in outdoor applications. This optional kit will provide NEMA 3R protection to the device.
    Space Age Electronics SSU03171 - BACK BOX FOR PULL STATION RED

    Summary

    The Pull Station Back Box (PSB) is a two (2) piece unit that allows the installer to mount a standard Fire Alarm Manual Pull Station to a typical Aluminum or Steel framed glass wall. The two piece unit is manufactured of tough 16 gauge CRS and is painted Red, White, Black or Bronze and has a “FIRE” sticker that once applied can be seen through the glass alerting passers-by of the presence of this Life Safety device. The back unit has a standard “device mount” hole spacing and an oversized wiring pull through hole; while the front cover has an industry standard "Single Gang" mounting configuration to facilitate most Manual Stations’ mounting requirements.

    Standard Features

    • Convenient two piece construction
    • Red, White, Black and Bronze color
    • “FIRE” Sticker supplied for each unit
    • 16 Gauge CRS construction made in the USA
    • Oversized design for ample wiring space and Addressable Point Module mounting

    Description

    The Space Age Electronics PSB is a 6 High x 4.5 Wide x 1.5 Deep, 2 piece assembly that allows for the proper installation of a Manual Pull Station, or other such device that maintains a Single Gang mounting footprint, to the side of a steel or aluminum channel framed glass wall.

    The PSB has a .835 hole to route wiring through and two double mounting holes used to secure the back box to the frame. The spacing of the two mounting holes that secure the PSB back box to the wall framework is 3.87 or the standard single gang device mount spacing. Double mounting holes keep the space between the PSB and the glass to a minimum.

    The mounting for the Manual Pull Station is standard single gang device mount spacing.

    The back box comes in Red, White, Black and Bronze colors and is supplied with 4 6x32 screws for securing the front cover to the back of the unit (4 threaded holes, 2 on the top edge and 2 along the bottom). The Manual Station (or other device) is secured by two 6x32 screws into threaded inserts on the front cover.

    The PSB is made of 16 gauge CRS and Powder Coat Painted for durability at Space Age Electronics, Inc.

       
     
    Fire Accessories for Fire Alarm Systems
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please