You are here: Home > Fire Alarms > Fire Alarm Control Panels
We found 54 results matching your criteria.
Fire Alarm Control Panels
Sort By:
Page of 5
Ademco / Honeywell 5110XM - Fire Alarm Communicator and Digital Alarm Communicator Transmitter (DACT) Ademco / Honeywell 5110XM-PAK1 - Kit consists of: 5110XM Fire Alarm Communicator and Digital Alarm Communicator Transmitter (DACT), 6160CR FIRE ALPHA KEYPAD- 5110XMPAK1

The 5110XM is a UL Listed, microprocessor based fire alarm control/communicator that supports five hardwired zones. It may be used as a slave Digital Alarm Communicator Transmitter (DACT) providing central or remote station service for a central or remote station listed Fire Alarm Control Panel (FACP). It may also be used as a stand alone non-coded local, central station or remote station control.

The model 5110XM is fully supervised and supports one two-wire smoke detection circuit and four-wire smoke detectors on all five circuits. Its powerful microprocessor continuously monitors and reports system status of AC, standby battery, zone inputs and telephone line connections. In the event of a fault condition a local audible sound is activated as well as reporting directly to central station.

FEATURES

  • Five supervised style B zones
  • One master code
  • Five user codes
  • Seven built-in LED indicators
  • One notification appliance circuit
  • Temporal code compliant
  • Supervised digital dialer
  • Optional panel door mounted silence/reset switch when AHJ approved
  • Supports two-wire compatible smoke detector
  • Supports up to four keypads
  • Backup digital dialer built in
  • Auxiliary form "C" relay
  • Built-in warning buzzer
  • Programmable via 6139R alpha keypad or downloader
  • Supports major communication formats
  • UL864 Listed
  • NFPA 72 compliant
  • MEA Approved
  • Upload/Download capable
APPLICATIONS
The 5110XM Fire Alarm Communicator (DACT - Digital Alarm Communicator Transmitter) is well suited for a variety of applications a stand alone fire control or slave DACT. A diverse line of ADEMCO alarm notification appliances as well as initiating devices supports this powerful control panel. Some of the applications supported are monitoring of sprinkler supervisory or waterflow switches in factory or warehouse environments, fast food chains, department stores, retail stores, library and museums as well as professional and office buildings. This panel complies with the new, June 1,1998 NFPA requirement to alternate testing of dual phone lines on a rotating basis.


INSTALLATION
The 5110XM Fire Alarm Communicator (DACT) has been designed to mount both quickly and easily. It meets all applicable requirements for UL Commercial Fire installations. Remotely program and troubleshoot this panel via ADEMCO’s WindowsTM based Compass Downloader.

SPECIFICATIONS:

Electrical:

    Primary power:

  • 20VAC, 60Hz, 600mA max
  • Secondary rated 18VAC, 40VA

    Quiescent panel current draw:

  • 155mA

    Backup battery:

  • 1 2VDC, 7AH min to 14AH max
  • Lead acid battery (gel type)

    Charging voltage:

  • 1 3.7VDC, nominal

    Alarm power:

  • 12VDC, 1.0A max for notification (bell) output

    Aux. standby power:

  • 12VDC,350mA max

    Total power:

  • 1.0A from all sources

    Aux. relay output:

  • Type: Form C

    Standby time:

  • 24 hours with 1A standby load or 60 hours with 210mA max standby load using 14AH battery

    Fusing:

  • Battery input, aux. and notification (bell) appliance circuits are protected using PTC circuit protectors. All outputs are power limited.

Dialers:

Line seize:

  • Double Pole

    Ringer equiv.:

  • 0.7B

    Formats:

  • ADEMCO Low Speed, ADEMCO 4+2 Express, ADEMCO High Speed, ADEMCO Contact ID, Sescoa and Radionics

    Mechanical: Cabinet dimensions —14.5”H X 1 2.5”W X 3”D

    Environmental:

  • -10°C to 70°C

    Operating temp:

  • 0°C to 50°C

    Humidity:

  • 85% RH

    EMI:

  • Meets or exceeds the following requirements:
    —FCC Part 15, Class B Device
    —FCC Part 68
    —IEC EMC Directive

    AGENCY LISTINGS:
    The 5110XM has been listed and approved for use in commercial fire applications. It has been listed under the following agency approvals: Fire

  • UL864/NFPA72 Central and Remote Station DACT and Local, Central Station and Remote Station Control
  • Factory Mutual
  • California State Fire Marshall
  • MEA
  • PowerPak includes:
  • 5110XM Control
  • 6160CR FIRE ALPHA KEYPAD

    The 5110XM is a UL Listed, microprocessor based fire alarm control/communicator that supports five hardwired zones. It may be used as a slave Digital Alarm Communicator Transmitter (DACT) providing central or remote station service for a central or remote station listed Fire Alarm Control Panel (FACP). It may also be used as a stand alone non-coded local, central station or remote station control.

    The model 5110XM is fully supervised and supports one two-wire smoke detection circuit and four-wire smoke detectors on all five circuits. Its powerful microprocessor continuously monitors and reports system status of AC, standby battery, zone inputs and telephone line connections. In the event of a fault condition a local audible sound is activated as well as reporting directly to central station.

    FEATURES

    • Five supervised style B zones
    • One master code
    • Five user codes
    • Seven built-in LED indicators
    • One notification appliance circuit
    • Temporal code compliant
    • Supervised digital dialer
    • Optional panel door mounted silence/reset switch when AHJ approved
    • Supports two-wire compatible smoke detector
    • Supports up to four keypads
    • Backup digital dialer built in
    • Auxiliary form "C" relay
    • Built-in warning buzzer
    • Programmable via 6139R alpha keypad or downloader
    • Supports major communication formats
    • UL864 Listed
    • NFPA 72 compliant
    • MEA Approved
    • Upload/Download capable
    APPLICATIONS
    The 5110XM Fire Alarm Communicator (DACT - Digital Alarm Communicator Transmitter) is well suited for a variety of applications a stand alone fire control or slave DACT. A diverse line of ADEMCO alarm notification appliances as well as initiating devices supports this powerful control panel. Some of the applications supported are monitoring of sprinkler supervisory or waterflow switches in factory or warehouse environments, fast food chains, department stores, retail stores, library and museums as well as professional and office buildings. This panel complies with the new, June 1,1998 NFPA requirement to alternate testing of dual phone lines on a rotating basis.


    INSTALLATION
    The 5110XM Fire Alarm Communicator (DACT) has been designed to mount both quickly and easily. It meets all applicable requirements for UL Commercial Fire installations. Remotely program and troubleshoot this panel via ADEMCO’s WindowsTM based Compass Downloader.

    SPECIFICATIONS:

    Electrical:

      Primary power:

    • 20VAC, 60Hz, 600mA max
    • Secondary rated 18VAC, 40VA

      Quiescent panel current draw:

    • 155mA

      Backup battery:

    • 1 2VDC, 7AH min to 14AH max
    • Lead acid battery (gel type)

      Charging voltage:

    • 1 3.7VDC, nominal

      Alarm power:

    • 12VDC, 1.0A max for notification (bell) output

      Aux. standby power:

    • 12VDC,350mA max

      Total power:

    • 1.0A from all sources

      Aux. relay output:

    • Type: Form C

      Standby time:

    • 24 hours with 1A standby load or 60 hours with 210mA max standby load using 14AH battery

      Fusing:

    • Battery input, aux. and notification (bell) appliance circuits are protected using PTC circuit protectors. All outputs are power limited.

    Dialers:

    Line seize:

  • Double Pole

    Ringer equiv.:

  • 0.7B

    Formats:

  • ADEMCO Low Speed, ADEMCO 4+2 Express, ADEMCO High Speed, ADEMCO Contact ID, Sescoa and Radionics

    Mechanical: Cabinet dimensions —14.5”H X 1 2.5”W X 3”D

    Environmental:

  • -10°C to 70°C

    Operating temp:

  • 0°C to 50°C

    Humidity:

  • 85% RH

    EMI:

  • Meets or exceeds the following requirements:
    —FCC Part 15, Class B Device
    —FCC Part 68
    —IEC EMC Directive

    AGENCY LISTINGS:
    The 5110XM has been listed and approved for use in commercial fire applications. It has been listed under the following agency approvals: Fire

  • UL864/NFPA72 Central and Remote Station DACT and Local, Central Station and Remote Station Control
  • Factory Mutual
  • California State Fire Marshall
  • MEA
  • Ademco / Honeywell 7720ULF-05 Radio Fire Control Panel - 7720ULF05 Ademco / Honeywell V128FB-24 - VISTA-128FB Commercial Fire and Partitioned Burglary Alarm Platform, supports 128 Zones/Points, 24V Model - V128FB24
    • Built-in Long Range Radio and fire control in one simple box
    • UL Listed for property protection and limited life safety Factory
    • Mutual (FM), California State Fire Marshal (CSFM) and MEA
    • 6 style B (Class B) and 2 style D (Class A) supervised zones
    • Zones can also be used for water-flow switches, supervisory switches and smoke detectors
    • Style Y (Class B) indicating output circuit provides maximum of 500 mA at 12VDC for motor bells
    • All zones can be used with voltage triggers or dry contact inputs
    • 18 V AC-to-DC power supply provides 24-hour backup and minimum 5 minute bell when battery is added  **DISCONTINUED & UNAVAILABLE**
    24V MODEL

    Designed to integrate seamlessly with CCTV, access control and Honeywell’s full range of fire and burglary components, the VISTA-128FB provides the ultimate protection of life and property. The UL listed Commercial Fire and Burglary Control Platform controls up to eight partitions and supports up to 128 zones/points using hardwired, wireless and addressable V-Plex technologies.

    A diverse line of Honeywell initiating devices, notification circuits, digital dialers, keypads, RF receivers and relays support this extremely powerful control platform. The VISTA-128FB has been designed to mount quickly and easily in an attack resistant cabinet and is available in 12V and 24V models.

    FEATURES:
    • Supports addressable V-Plex access control points using VistaKey (1 to 8 doors)
    • Supports up to 15 doors of access control using VISTA Gateway Module (VGM)*
    • Supports CCTV applications with the new VistaView-100 CCTV switcher module
    • Identifies the point or zone of a fire or alarm, using the new FSA-8/FSA-24 Fire system annunciator
    • Stores up to 512 events and can accommodate 150 user codes
    • New E2 software simplifies programming
    • Easily programmed and maintained with newly upgraded Compass Downloader software
    • Eight hardwired zones standard, expandable to 120 V-Plex addressable points/zones or 128 wireless points/zones
    • Can control eight separate areas independently (8 partitions)
    • Two on-board notification (bell) circuits delivering 2.3A @ 12V or 3.4 amp @ 24V
    • Automatic smoke detector sensitivity maintenance testing
    * Connects to Honeywell's Passpoint Access Control Systems. Maximum 32 doors.

    CONTROL PANEL SPECIFICATIONS:

    Cabinet dimensions:
  • 18"H X 14.5"W X 4.3"D

    Environmental:
  • Storage temp: -14°F to 158°F (-10°C to 70°C)
  • Operating temp: -32°F to 122°F (0°C to 50°C)
  • Humidity: 85% RH

    EMI: Meets or exceeds the following requirements:
  • FCC Part 15, Class B Device
  • FCC Part 68
  • IEC EMC Directive

    Agency Listings: Burglary
  • UL609 Grade A Local Mercantile Premises and
  • Mercantile Safe and Vault
  • UL611/1610 Grades A, AA, Central Station
  • UL365 Grades A, AA Police Connect

    Fire:
  • UL864 FPA72 Local, Central Station and Remote Station
  • Factory Mutual
  • California State Fire Marshal
  • MEA
  • UL985

    Additional Features:
  • Notification Appliance Circuits (two)
  • Programmable
  • Temporal code compliant
  • Individually silenceable
  • Programmable on-board auxiliary relay
  • SIA false alarm reduction features:
  • Exit Error Logic
  • Exit Delay Reset
  • Cross Zoning
  • Call Waiting Defeat
  • Recent Close Report
  • Supports commercial hardwired, addressable V-Plex polling loop and wireless zones
  • Hardwired zones:
    – Provides nine style B hardwired zones
    – EOLR supervised for Fire and UL burglary installations
    – Supports N.0 or N.C. sensors
    – Individually assignable to one or all eight partitions
    – Up to 16 two-wire smoke detectors each zone 1 and 2 (32 total)
    – Up to 50 two-wire glass break detectors on zone eight
  • Patented addressable V-Plex polling loopV-Plex technology:
    – Supports up to 120 two-wire zones/points
    – Global polling technology for faster processing
    – Increased current draw capacit (128mA)
    – Supervised by panel
    – Individually assignable to partitions, notification circuit (bell) output or aux relay
    – 4,000 ft capability without the use of shielded cable
    – Extender/Isolation bus module
    – Two-wire smoke detector zone/group expansion module adds two or four zones
    – Eight zone – Class A and B Extender Module
    – One zone supervised Contact Monitor Module
  • UL Listed wireless expansion
    – Supports up to 128 wireless zones using 5881 Receiver
    – Supervised by control for check-in signals
    – Tamper protection for transmitter
    – Individually assignable up to eight partitions
    – Supports UL864 FPA approved wireless smoke\ndetectors
  • Access control integration
    – Full integration with PassPoint
    – Access Control System Complete Gateway in access functions
  • Event reporting
  • Local printer of access or VISTA related event
  • Scheduled uploading of events to central station
  • Stored events for one call retrieval
  • Communication
    – Phone mapping by zone response type
    – Supports VIP Interactive Phone Voice Module
    – Panel operation during download
    – Uploading equipment list to central station
    – Communication to PassPoint via Vista Gateway Module (VGM)

    Applications: Supported by a diverse line of Honeywell initiating devices, the powerful VISTA-128FB is the ideal integrated fire and burglary control for applications where a higher level of security is necessary including medical and professional buildings, supermarkets, churches and synagogues, office buildings, schools, universities, strip malls, larger residences and factory or warehouse environments.

    Installation: The VISTA-128FB alarm system has been designed to mount both quickly and easily in an attack resistant cabinet. It meets all applicable requirements for UL commercial burglary installations.

    Electrical Specifications:
  • Primary power:
    – 18 VAC@ 72 VA No. 1450
    – Quiescent current draw:
    – 350mA
  • Backup battery
    – 12VDC, 12AH min to 34AAH max
    – Lead acid battery (gel type)
  • Alarm power
    – 12VDC, 1.7A max for each notification (bell) circuit output
  • Aux. standby power
    – 12VDC, 1A max
  • Total power
    – 2.3A at 12VDC, 3.4A at 24VDC from all sources
  • Standby time
    – 24 hours with 1A standby load or 60 hours with 205mA max standby load using 34AAH battery
  • Fusing
    – Battery input, aux. and notification (bell) circuit outputs are protected using PTC circuit protectors. All outputs are power limited.
  • Main dialer
    – Line seize:
    – Double Pole

    Ringer equiv.:
  • 0.713

    Formats:
  • ADEMCO Low Speed, ADEMCO 4+2 Express, ADEMCO High Speed, ADEMCO Contact ID, Sescoa and Radionics
  • Ademco / Honeywell V128FB-PAK6 - VISTA-128FB 12-VOLT  FIRE/BURGLARY 128 ZONE COMMERCIAL CONTROL  + 6160CR  KEYPAD, ALPHA, FIRE, RED  + 5140DLM  SUPERVISED DIALER (FOR 5140XM)  - V128FBPAK6 Ademco / Honeywell V128FB-PAK8 - VISTA-128FB 12-VOLT  FIRE/BURGLARY 128 ZONE COMMERCIAL CONTROL  + 6160 KEYPAD, ALPHA + 5140DLM  SUPERVISED DIALER (FOR 5140XM)  - V128FBPAK8
    KIT CONSISTS OF:
  • VISTA-128FB 12-VOLT FIRE/BURGLARY 128 ZONE COMMERCIAL CONTROL
  • 6160CR KEYPAD ,ALPHA, FIRE, RED
  • 5140DLM SUPERVISED DIALER (FOR 5140XM)

    Commercial Fire and Partitioned Burglary Alarm Control Panel

    Designed to integrate seamlessly with CCTV, access control, and ADEMCO’s full range of fire and burglary components, the NEW VISTA-128FBP provides the ultimate protection of life and property. The UL listed Commercial Fire and Burglary Control Platform controls up to eight partitions, and supports up to 128 zones/points using hardwired, wireless and V-Plex addressable technologies. A diverse line of ADEMCO initiating devices, notification circuits, digital dialers, keypads, RF receivers and relays are supported by extremely powerful control platform. The VISTA-128FBP has been designed to mount quickly and easily in an attack resistant cabinet, and is available in 12V and 24V models. A revolutionary new feature called Panel Linking allows multiple partitions, panels - even buildings to be armed, disarmed and have status checked from one location.

    FEATURES
    • Eight hardwired zones standard, expandable to 120 V-Plex addressable points/zones or 128 wireless points/zones
    • Can control eight separate areas independently (8 partitions)
    • Supports Panel-Linking allows up to 8 systems or buildings to be controlled from one central location (using VA8200)
    • Supports commercial UL wireless fire and burg
    • Stores up to 512 events and can accommodate 150 user codes
    • Supports addressable V-Plex access control points using VistaKey (1 to 8 doors)
    • Supports up to 16 doors of access control using Vista Gateway Module (VGM)*
    • Supports CCTV applications with the new VistaView-100 CCTV Switcher Module
    • Identifies the point or zone of a fire or alarm, using the new FSA-8/FSA-24 Fire System Annunciator
    • Programmable to meet SIA false alarm prevention specifications. To meet UL approval forANSI/SIA CP-01-2000 order part number VISTA-128SIA
    • Two on-board notification (bell) circuits delivering 2.3 amp @ 12V or 3.4 amp @ 24V
    • Automatic smoke detector sensitivity maintenance testing
    • 4-wire smoke reset using onboard J2 output trigger
    • Supports Dynamic Signaling for LRR
    • Supports Remote Control-via the internet**
    • Supports Internet Alarm Reporting**
    • Supports the new Graphical User Interface Consoles
    • Supports up to 250 access card holders using VistaKey
    • Supports AlphaNumeric pager up to 8 different numbers using the VA8201
    * Connects to Northern Computers Passpoint Access Control Systems. Maximum 32 doors.

    ** When used with AlarmNet-i

    ADDITIONAL FEATURES

    • Notification Appliance Circuits (two):
      - Programmable
      - Temporal code compliant
      - Individually silenceable
    • Programmable on-board auxiliary relay
    • SIA false alarm reduction features:
      - Exit error logic
      - Exit delay reset
      - Cross zoning
      - Call waiting defeat
      - Recent close report
    • Supports commercial hardwired, addressable V-Plex polling loop and wireless zones
    • Hardwired zones
      - Provides eight style B hardwired zones
      - EOLR supervised for Fire and UL burglary installations
      - Supports N.O or N.C. sensors
      - Individually assignable to any eight partition
      - Up to 32 two-wire smoke detectors each on zone one and two (64 total)
      - Up to 50 two-wire glassbreak detectors on zone eight
    • Patented addressable V-Plex polling loop technology
      - Supports 120 two-wire zones points
      - Global polling technology for faster processing
      - Increased current draw capacity (128mA)
      - Supervised by panel
      - Individually assignable to partitions, notification circuit (bell) output or aux relay
      - 4,000 ft capability without the use of shielded cable
      - Extender/Isolation bus module
      - Two-wire smoke detector zone/group expansion module adds two or four zones
      - Eight zone - Class A and B extender module
      - Eight zone - Class B extender module
      - One zone supervised contact monitor module
    • UL Listed wireless expansion
      - Supports up to 128 wireless zones/points using 5881ENHC receiver
      - Supervised by control for check-in signals
      - Tamper protection for transmitters
      - Individually assignable up to eight partitions
      - Supports UL864/NFPA approved wireless smoke detectors
    • Access Control integration
      - Full integration with PassPoint Access Control System Complete Gateway interface of VISTA and access functions
    • Up to 8 doors using VistaKey V-Plex Access Control
    • Event reporting
    • Local printer of access or VISTA related event
    • Scheduled uploading of events to central station
    • Stored events for one call retrieval
    • Communication 
      - Phone mapping by zone response type
      - Supports VIP interactive phone voice module
      - Panel operation during download
      - Uploading equipment list to central station
      - Communication to PassPoint via Vista Gateway Module
    • CCTV integration
      - Supports VistaView-100 ECP based CCTV switchers
    APPLICATIONS
    The VISTA-128FBP control is well suited for a variety of applications as an integrated fire and burglary control. A diverse line of ADEMCO initiating devices supports this extremely powerful control. Some of the applications supported are: medical and professional buildings, churches or synagogues, office buildings, schools, strip malls, larger residences and factory or warehouse environments.


    Installation
    The VISTA-128FBP alarm system has been designed to mount both quickly and easily. It meets all applicable requirements for UL commercial fire and burglary installations.

    CONTROL PANEL SPECIFICATIONS:

    Applications:
    The VISTA-128FBP control is well suited for a variety of applications as an integrated fire and burglary control. A diverse line of ADEMCO initiating devices supports this extremely powerful control. Some of the applications supported are: medical and professional buildings, churches or synagogues, office buildings, schools, strip malls, larger residences and factory or warehouse environments.

    Installation: The VISTA-128FBP alarm system has been designed to mount both quickly and easily. It meets all applicable requirements for UL commercial fire and burglary installations.

    Electrical Specifications :
  • Primary power: 18VAC @ 72VA Honeywell No. 1451
  • Control panel quiescent current draw: 350mA
  • Backup battery:
    – 12VDC, 12AH min to 34.4AH max
    – Lead acid battery (gel type)
  • Alarm power: 12VDC, 1.7A max for each notification (bell) circuit output Total 2.3amps @ 12V
  • Aux. standby pwr: 12VDC, 1Amax
  • Total power: 2.3A at 12VDC, 3.4A at 24VDC from all sources
  • Standby time: 24 hours with 1A standby load using 34.4AH battery
  • Fusing: Battery input, aux. and notification (bell) circuit outputs are protected using PTC circuit protectors. All outputs are power limited.
  • Optional 24-volt power supply, PS 24 Supplies two 24 VFW, 1.7A full wave rectified, unfiltered outputsMain Dialer:
  • Line seize: Double Pole
  • Ringer equiv.: 0.7B
  • Formats: ADEMCO Low Speed, ADEMCO 4+2 Express, ADEMCO High Speed, ADEMCO Contact ID, Sescoa and Radionics
  • Dual phone line capability (using 5140DLM module)

    Cabinet dimensions:
  • 18”H X 14.5”W X 4.3”D

    Environmental:
  • Storage temp: 14°F to 158°F (-10°C to 70°C)
  • Operating temp: 32°F to 122°F (0°C to 50°C)
  • Humidity: 85% RH
  • EMI: Meets or exceeds the following requirements:
    – FCC Part 15, Class B Device
    – FCC Part 68
    – IEC EMC Directive

    Agency Listings Burglary:
  • UL609 Grade A Local Mercantile Premises and Mercantile Safe and Vault
  • UL611/1610 Grades A, AA, Central Station
  • UL365 Grades A, AA Police Connect

    Fire:
  • UL864/NFPA72 Local, Central Station and Remote Station
  • Factory Mutual
  • California State Fire Marshal
  • MEA
  • UL985

    Auxiliary Devices:
  • 6160CR
    – Red Alpha Keypad
  • 6139R
    – Red Alpha Keypad/Annunciator
  • FSA-8 & FSA-24 annunciator modules
  • 4204
    – Relay Module, four form C contacts
  • 4204CF
    – Two supervised output circuits
  • 5881 Series
    – RF receiver supporting 5800 wireless detectors
  • 6220S
    – System printer used with 4100SM serial module

    Two-wire smoke detectors, conventional:
  • 2100 Series Photoelectric
  • 2400 Series Photoelectric
  • 1100 Series Ionization

    Four-wire smoke detectors, conventional:
  • 2112/24 Series Photoelectric
  • 1412 Series Ionization

    Horn/Strobes:
  • System Sensor Notification Appliances

    Manual Pull Stations:
  • 5140MPS-1
  • 5140MPS-2

    V-Plex (addressable) Devices:
  • 4208U Loop Expansion Module
    – eight zones
  • 4101SN Single Relay/Zone Module
  • 4208SNF Class A/B Expander Module
  • 4209U Group Zoning Module
    – two/four zones
  • 4190SN Remote Point Module
    – two zones
  • 4193SN Two Zone Serial Interface Module
  • 4293SN One Zone Serial Interface Module
  • 4297 Isolation/Extender Module

    V-Plex (addressable) Smoke Detectors:
  • 5192SD
  • 4192SD
  • 4192CP
  • 5192SDT
  • 4192SDT
  • 4192CPM
  • 4192SDTM

    V-Plex Passive Infrared Detectors:
  • 998MX
  • 4275EX-SN
  • 4278EX-SN

    V-Plex (addressable) Contacts:
  • 4939SN-WH
  • 4944SN-WH
  • 4959SN

    V-Plex Glassbreak Detectors:
  • 9500SN

    VISTA interactive phone module:
  • 4286 Voice Module

    Optional 24V Power Supply:
  • PS24
    – 24V power supply
    – 3.4A

    Long Range Radio:
  • Long Range Radio 7720ULF-XX, 7835C, 7835CF, 7845C

    Upgraded software:
  • Upgraded Compass Downloader Windows compatible

    Wireless Devices:
  • 5804BDV
    – Bi-directional with voice
  • 5804BD
    – Bi-directional Key
  • 5804Watch
    – Wireless Key & sports watch combined
  • 5816
    – Door/Window Transmitter
  • 5804
    – Wireless key
  • 5827BD
    – Bi-directional Keypad
  • 5890
    – PIR
  • 5849
    – Glassbreak Detector
  • 5819
    – Shock Sensor

    Commercial Wireless Devices:
  • 5808W3
    – Photoelectric Smoke/Heat Detector
  • 5809
    – Wireless Heat Detector
  • 5817CB
    – Wireless Commercial Transmitter
  • 5869
    – Hold-Up Transmitter
  • 5881ENHC
    – Commercial Fire/Burg Receiver Access Control
  • VistaKey V-Plex (addressable)

    Access Control:
  • VistaKey-SK Starter Kit
  • VistaKey-EX Expansion Kit
  • VGM Vista Gateway Module to PassPoint Access Control (Northern Computers)

    CCTV:
  • VistaView-100 CCTV Switcher or Module

    Alarm Communications:
  • Graphical user interface with Internet capability
  • Internet Remote Control-Networking Module
  • Internet Alarm Communicator (7845i)
  • 7845GSM
    – Digital Cellular Communicator
  • 7845i-GSM
    – Internet and Digital Cellular Communicator

    Paging:
  • VA8201 AlphaNumeric Pager
  • KIT CONSISTS OF:
  • VISTA-128FB 12-VOLT FIRE/BURGLARY 128 ZONE COMMERCIAL CONTROL
  • 6160 KEYPAD ,ALPHA
  • 5140DLM SUPERVISED DIALER (FOR 5140XM)

    Commercial Fire and Partitioned Burglary Alarm Control Panel

    Designed to integrate seamlessly with CCTV, access control, and ADEMCO’s full range of fire and burglary components, the NEW VISTA-128FBP provides the ultimate protection of life and property. The UL listed Commercial Fire and Burglary Control Platform controls up to eight partitions, and supports up to 128 zones/points using hardwired, wireless and V-Plex addressable technologies. A diverse line of ADEMCO initiating devices, notification circuits, digital dialers, keypads, RF receivers and relays are supported by extremely powerful control platform. The VISTA-128FBP has been designed to mount quickly and easily in an attack resistant cabinet, and is available in 12V and 24V models. A revolutionary new feature called Panel Linking allows multiple partitions, panels - even buildings to be armed, disarmed and have status checked from one location.

    FEATURES
    • Eight hardwired zones standard, expandable to 120 V-Plex addressable points/zones or 128 wireless points/zones
    • Can control eight separate areas independently (8 partitions)
    • Supports Panel-Linking allows up to 8 systems or buildings to be controlled from one central location (using VA8200)
    • Supports commercial UL wireless fire and burg
    • Stores up to 512 events and can accommodate 150 user codes
    • Supports addressable V-Plex access control points using VistaKey (1 to 8 doors)
    • Supports up to 16 doors of access control using Vista Gateway Module (VGM)*
    • Supports CCTV applications with the new VistaView-100 CCTV Switcher Module
    • Identifies the point or zone of a fire or alarm, using the new FSA-8/FSA-24 Fire System Annunciator
    • Programmable to meet SIA false alarm prevention specifications. To meet UL approval forANSI/SIA CP-01-2000 order part number VISTA-128SIA
    • Two on-board notification (bell) circuits delivering 2.3 amp @ 12V or 3.4 amp @ 24V
    • Automatic smoke detector sensitivity maintenance testing
    • 4-wire smoke reset using onboard J2 output trigger
    • Supports Dynamic Signaling for LRR
    • Supports Remote Control-via the internet**
    • Supports Internet Alarm Reporting**
    • Supports the new Graphical User Interface Consoles
    • Supports up to 250 access card holders using VistaKey
    • Supports AlphaNumeric pager up to 8 different numbers using the VA8201
    * Connects to Northern Computers Passpoint Access Control Systems. Maximum 32 doors.

    ** When used with AlarmNet-i

    ADDITIONAL FEATURES

    • Notification Appliance Circuits (two):
      - Programmable
      - Temporal code compliant
      - Individually silenceable
    • Programmable on-board auxiliary relay
    • SIA false alarm reduction features:
      - Exit error logic
      - Exit delay reset
      - Cross zoning
      - Call waiting defeat
      - Recent close report
    • Supports commercial hardwired, addressable V-Plex polling loop and wireless zones
    • Hardwired zones
      - Provides eight style B hardwired zones
      - EOLR supervised for Fire and UL burglary installations
      - Supports N.O or N.C. sensors
      - Individually assignable to any eight partition
      - Up to 32 two-wire smoke detectors each on zone one and two (64 total)
      - Up to 50 two-wire glassbreak detectors on zone eight
    • Patented addressable V-Plex polling loop technology
      - Supports 120 two-wire zones points
      - Global polling technology for faster processing
      - Increased current draw capacity (128mA)
      - Supervised by panel
      - Individually assignable to partitions, notification circuit (bell) output or aux relay
      - 4,000 ft capability without the use of shielded cable
      - Extender/Isolation bus module
      - Two-wire smoke detector zone/group expansion module adds two or four zones
      - Eight zone - Class A and B extender module
      - Eight zone - Class B extender module
      - One zone supervised contact monitor module
    • UL Listed wireless expansion
      - Supports up to 128 wireless zones/points using 5881ENHC receiver
      - Supervised by control for check-in signals
      - Tamper protection for transmitters
      - Individually assignable up to eight partitions
      - Supports UL864/NFPA approved wireless smoke detectors
    • Access Control integration
      - Full integration with PassPoint Access Control System Complete Gateway interface of VISTA and access functions
    • Up to 8 doors using VistaKey V-Plex Access Control
    • Event reporting
    • Local printer of access or VISTA related event
    • Scheduled uploading of events to central station
    • Stored events for one call retrieval
    • Communication 
      - Phone mapping by zone response type
      - Supports VIP interactive phone voice module
      - Panel operation during download
      - Uploading equipment list to central station
      - Communication to PassPoint via Vista Gateway Module
    • CCTV integration
      - Supports VistaView-100 ECP based CCTV switchers
    APPLICATIONS
    The VISTA-128FBP control is well suited for a variety of applications as an integrated fire and burglary control. A diverse line of ADEMCO initiating devices supports this extremely powerful control. Some of the applications supported are: medical and professional buildings, churches or synagogues, office buildings, schools, strip malls, larger residences and factory or warehouse environments.


    Installation
    The VISTA-128FBP alarm system has been designed to mount both quickly and easily. It meets all applicable requirements for UL commercial fire and burglary installations.

    CONTROL PANEL SPECIFICATIONS:

    Applications:
    The VISTA-128FBP control is well suited for a variety of applications as an integrated fire and burglary control. A diverse line of ADEMCO initiating devices supports this extremely powerful control. Some of the applications supported are: medical and professional buildings, churches or synagogues, office buildings, schools, strip malls, larger residences and factory or warehouse environments.

    Installation: The VISTA-128FBP alarm system has been designed to mount both quickly and easily. It meets all applicable requirements for UL commercial fire and burglary installations.

    Electrical Specifications :
  • Primary power: 18VAC @ 72VA Honeywell No. 1451
  • Control panel quiescent current draw: 350mA
  • Backup battery:
    – 12VDC, 12AH min to 34.4AH max
    – Lead acid battery (gel type)
  • Alarm power: 12VDC, 1.7A max for each notification (bell) circuit output Total 2.3amps @ 12V
  • Aux. standby pwr: 12VDC, 1Amax
  • Total power: 2.3A at 12VDC, 3.4A at 24VDC from all sources
  • Standby time: 24 hours with 1A standby load using 34.4AH battery
  • Fusing: Battery input, aux. and notification (bell) circuit outputs are protected using PTC circuit protectors. All outputs are power limited.
  • Optional 24-volt power supply, PS 24 Supplies two 24 VFW, 1.7A full wave rectified, unfiltered outputsMain Dialer:
  • Line seize: Double Pole
  • Ringer equiv.: 0.7B
  • Formats: ADEMCO Low Speed, ADEMCO 4+2 Express, ADEMCO High Speed, ADEMCO Contact ID, Sescoa and Radionics
  • Dual phone line capability (using 5140DLM module)

    Cabinet dimensions:
  • 18”H X 14.5”W X 4.3”D

    Environmental:
  • Storage temp: 14°F to 158°F (-10°C to 70°C)
  • Operating temp: 32°F to 122°F (0°C to 50°C)
  • Humidity: 85% RH
  • EMI: Meets or exceeds the following requirements:
    – FCC Part 15, Class B Device
    – FCC Part 68
    – IEC EMC Directive

    Agency Listings Burglary:
  • UL609 Grade A Local Mercantile Premises and Mercantile Safe and Vault
  • UL611/1610 Grades A, AA, Central Station
  • UL365 Grades A, AA Police Connect

    Fire:
  • UL864/NFPA72 Local, Central Station and Remote Station
  • Factory Mutual
  • California State Fire Marshal
  • MEA
  • UL985

    Auxiliary Devices:
  • 6160CR
    – Red Alpha Keypad
  • 6139R
    – Red Alpha Keypad/Annunciator
  • FSA-8 & FSA-24 annunciator modules
  • 4204
    – Relay Module, four form C contacts
  • 4204CF
    – Two supervised output circuits
  • 5881 Series
    – RF receiver supporting 5800 wireless detectors
  • 6220S
    – System printer used with 4100SM serial module

    Two-wire smoke detectors, conventional:
  • 2100 Series Photoelectric
  • 2400 Series Photoelectric
  • 1100 Series Ionization

    Four-wire smoke detectors, conventional:
  • 2112/24 Series Photoelectric
  • 1412 Series Ionization

    Horn/Strobes:
  • System Sensor Notification Appliances

    Manual Pull Stations:
  • 5140MPS-1
  • 5140MPS-2

    V-Plex (addressable) Devices:
  • 4208U Loop Expansion Module
    – eight zones
  • 4101SN Single Relay/Zone Module
  • 4208SNF Class A/B Expander Module
  • 4209U Group Zoning Module
    – two/four zones
  • 4190SN Remote Point Module
    – two zones
  • 4193SN Two Zone Serial Interface Module
  • 4293SN One Zone Serial Interface Module
  • 4297 Isolation/Extender Module

    V-Plex (addressable) Smoke Detectors:
  • 5192SD
  • 4192SD
  • 4192CP
  • 5192SDT
  • 4192SDT
  • 4192CPM
  • 4192SDTM

    V-Plex Passive Infrared Detectors:
  • 998MX
  • 4275EX-SN
  • 4278EX-SN

    V-Plex (addressable) Contacts:
  • 4939SN-WH
  • 4944SN-WH
  • 4959SN

    V-Plex Glassbreak Detectors:
  • 9500SN

    VISTA interactive phone module:
  • 4286 Voice Module

    Optional 24V Power Supply:
  • PS24
    – 24V power supply
    – 3.4A

    Long Range Radio:
  • Long Range Radio 7720ULF-XX, 7835C, 7835CF, 7845C

    Upgraded software:
  • Upgraded Compass Downloader Windows compatible

    Wireless Devices:
  • 5804BDV
    – Bi-directional with voice
  • 5804BD
    – Bi-directional Key
  • 5804Watch
    – Wireless Key & sports watch combined
  • 5816
    – Door/Window Transmitter
  • 5804
    – Wireless key
  • 5827BD
    – Bi-directional Keypad
  • 5890
    – PIR
  • 5849
    – Glassbreak Detector
  • 5819
    – Shock Sensor

    Commercial Wireless Devices:
  • 5808W3
    – Photoelectric Smoke/Heat Detector
  • 5809
    – Wireless Heat Detector
  • 5817CB
    – Wireless Commercial Transmitter
  • 5869
    – Hold-Up Transmitter
  • 5881ENHC
    – Commercial Fire/Burg Receiver Access Control
  • VistaKey V-Plex (addressable)

    Access Control:
  • VistaKey-SK Starter Kit
  • VistaKey-EX Expansion Kit
  • VGM Vista Gateway Module to PassPoint Access Control (Northern Computers)

    CCTV:
  • VistaView-100 CCTV Switcher or Module

    Alarm Communications:
  • Graphical user interface with Internet capability
  • Internet Remote Control-Networking Module
  • Internet Alarm Communicator (7845i)
  • 7845GSM
    – Digital Cellular Communicator
  • 7845i-GSM
    – Internet and Digital Cellular Communicator

    Paging:
  • VA8201 AlphaNumeric Pager
  • Ademco / Honeywell V128FBP-KT10 - VISTA-128FBP 12-VOLT  FIRE/BURGLARY 128 ZONE COMMERCIAL CONTROL  + 6160CR  KEYPAD, ALPHA, FIRE, RED + 6160 KEYPAD, ALPHA + 5140DLM  SUPERVISED DIALER (FOR 5140XM)  - V128FBKT10 Ademco / Honeywell V128FBP-KT11 - VISTA-128FBP 12-VOLT  FIRE/BURGLARY 128 ZONE COMMERCIAL CONTROL  + 6160 KEYPAD, ALPHA + 4208U  8 ZONE UNIVERSAL EXPANDER  - V128FBKT11
    KIT CONSISTS OF:
  • VISTA-128FBP 12-VOLT FIRE/BURGLARY 128 ZONE COMMERCIAL CONTROL
  • 6160CR KEYPAD, ALPHA, FIRE, RED
  • 6160 ALPHA ENGLISH KEYPAD
  • 5140DLM SUPERVISED DIALER (FOR 5140XM)

    Commercial Fire and Partitioned Burglary Alarm Control Panel

    Designed to integrate seamlessly with CCTV, access control, and ADEMCO’s full range of fire and burglary components, the NEW VISTA-128FBP provides the ultimate protection of life and property. The UL listed Commercial Fire and Burglary Control Platform controls up to eight partitions, and supports up to 128 zones/points using hardwired, wireless and V-Plex addressable technologies. A diverse line of ADEMCO initiating devices, notification circuits, digital dialers, keypads, RF receivers and relays are supported by extremely powerful control platform. The VISTA-128FBP has been designed to mount quickly and easily in an attack resistant cabinet, and is available in 12V and 24V models. A revolutionary new feature called Panel Linking allows multiple partitions, panels - even buildings to be armed, disarmed and have status checked from one location.

    FEATURES
    • Eight hardwired zones standard, expandable to 120 V-Plex addressable points/zones or 128 wireless points/zones
    • Can control eight separate areas independently (8 partitions)
    • Supports Panel-Linking allows up to 8 systems or buildings to be controlled from one central location (using VA8200)
    • Supports commercial UL wireless fire and burg
    • Stores up to 512 events and can accommodate 150 user codes
    • Supports addressable V-Plex access control points using VistaKey (1 to 8 doors)
    • Supports up to 16 doors of access control using Vista Gateway Module (VGM)*
    • Supports CCTV applications with the new VistaView-100 CCTV Switcher Module
    • Identifies the point or zone of a fire or alarm, using the new FSA-8/FSA-24 Fire System Annunciator
    • Programmable to meet SIA false alarm prevention specifications. To meet UL approval forANSI/SIA CP-01-2000 order part number VISTA-128SIA
    • Two on-board notification (bell) circuits delivering 2.3 amp @ 12V or 3.4 amp @ 24V
    • Automatic smoke detector sensitivity maintenance testing
    • 4-wire smoke reset using onboard J2 output trigger
    • Supports Dynamic Signaling for LRR
    • Supports Remote Control-via the internet**
    • Supports Internet Alarm Reporting**
    • Supports the new Graphical User Interface Consoles
    • Supports up to 250 access card holders using VistaKey
    • Supports AlphaNumeric pager up to 8 different numbers using the VA8201
    * Connects to Northern Computers Passpoint Access Control Systems. Maximum 32 doors.

    ** When used with AlarmNet-i

    ADDITIONAL FEATURES

    • Notification Appliance Circuits (two):
      - Programmable
      - Temporal code compliant
      - Individually silenceable
    • Programmable on-board auxiliary relay
    • SIA false alarm reduction features:
      - Exit error logic
      - Exit delay reset
      - Cross zoning
      - Call waiting defeat
      - Recent close report
    • Supports commercial hardwired, addressable V-Plex polling loop and wireless zones
    • Hardwired zones
      - Provides eight style B hardwired zones
      - EOLR supervised for Fire and UL burglary installations
      - Supports N.O or N.C. sensors
      - Individually assignable to any eight partition
      - Up to 32 two-wire smoke detectors each on zone one and two (64 total)
      - Up to 50 two-wire glassbreak detectors on zone eight
    • Patented addressable V-Plex polling loop technology
      - Supports 120 two-wire zones points
      - Global polling technology for faster processing
      - Increased current draw capacity (128mA)
      - Supervised by panel
      - Individually assignable to partitions, notification circuit (bell) output or aux relay
      - 4,000 ft capability without the use of shielded cable
      - Extender/Isolation bus module
      - Two-wire smoke detector zone/group expansion module adds two or four zones
      - Eight zone - Class A and B extender module
      - Eight zone - Class B extender module
      - One zone supervised contact monitor module
    • UL Listed wireless expansion
      - Supports up to 128 wireless zones/points using 5881ENHC receiver
      - Supervised by control for check-in signals
      - Tamper protection for transmitters
      - Individually assignable up to eight partitions
      - Supports UL864/NFPA approved wireless smoke detectors
    • Access Control integration
      - Full integration with PassPoint Access Control System Complete Gateway interface of VISTA and access functions
    • Up to 8 doors using VistaKey V-Plex Access Control
    • Event reporting
    • Local printer of access or VISTA related event
    • Scheduled uploading of events to central station
    • Stored events for one call retrieval
    • Communication 
      - Phone mapping by zone response type
      - Supports VIP interactive phone voice module
      - Panel operation during download
      - Uploading equipment list to central station
      - Communication to PassPoint via Vista Gateway Module
    • CCTV integration
      - Supports VistaView-100 ECP based CCTV switchers
    APPLICATIONS
    The VISTA-128FBP control is well suited for a variety of applications as an integrated fire and burglary control. A diverse line of ADEMCO initiating devices supports this extremely powerful control. Some of the applications supported are: medical and professional buildings, churches or synagogues, office buildings, schools, strip malls, larger residences and factory or warehouse environments.


    Installation
    The VISTA-128FBP alarm system has been designed to mount both quickly and easily. It meets all applicable requirements for UL commercial fire and burglary installations.

    CONTROL PANEL SPECIFICATIONS:

    Applications:
    The VISTA-128FBP control is well suited for a variety of applications as an integrated fire and burglary control. A diverse line of ADEMCO initiating devices supports this extremely powerful control. Some of the applications supported are: medical and professional buildings, churches or synagogues, office buildings, schools, strip malls, larger residences and factory or warehouse environments.

    Installation: The VISTA-128FBP alarm system has been designed to mount both quickly and easily. It meets all applicable requirements for UL commercial fire and burglary installations.

    Electrical Specifications :
  • Primary power: 18VAC @ 72VA Honeywell No. 1451
  • Control panel quiescent current draw: 350mA
  • Backup battery:
    – 12VDC, 12AH min to 34.4AH max
    – Lead acid battery (gel type)
  • Alarm power: 12VDC, 1.7A max for each notification (bell) circuit output Total 2.3amps @ 12V
  • Aux. standby pwr: 12VDC, 1Amax
  • Total power: 2.3A at 12VDC, 3.4A at 24VDC from all sources
  • Standby time: 24 hours with 1A standby load using 34.4AH battery
  • Fusing: Battery input, aux. and notification (bell) circuit outputs are protected using PTC circuit protectors. All outputs are power limited.
  • Optional 24-volt power supply, PS 24 Supplies two 24 VFW, 1.7A full wave rectified, unfiltered outputsMain Dialer:
  • Line seize: Double Pole
  • Ringer equiv.: 0.7B
  • Formats: ADEMCO Low Speed, ADEMCO 4+2 Express, ADEMCO High Speed, ADEMCO Contact ID, Sescoa and Radionics
  • Dual phone line capability (using 5140DLM module)

    Cabinet dimensions:
  • 18”H X 14.5”W X 4.3”D

    Environmental:
  • Storage temp: 14°F to 158°F (-10°C to 70°C)
  • Operating temp: 32°F to 122°F (0°C to 50°C)
  • Humidity: 85% RH
  • EMI: Meets or exceeds the following requirements:
    – FCC Part 15, Class B Device
    – FCC Part 68
    – IEC EMC Directive

    Agency Listings Burglary:
  • UL609 Grade A Local Mercantile Premises and Mercantile Safe and Vault
  • UL611/1610 Grades A, AA, Central Station
  • UL365 Grades A, AA Police Connect

    Fire:
  • UL864/NFPA72 Local, Central Station and Remote Station
  • Factory Mutual
  • California State Fire Marshal
  • MEA
  • UL985

    Auxiliary Devices:
  • 6160CR
    – Red Alpha Keypad
  • 6139R
    – Red Alpha Keypad/Annunciator
  • FSA-8 & FSA-24 annunciator modules
  • 4204
    – Relay Module, four form C contacts
  • 4204CF
    – Two supervised output circuits
  • 5881 Series
    – RF receiver supporting 5800 wireless detectors
  • 6220S
    – System printer used with 4100SM serial module

    Two-wire smoke detectors, conventional:
  • 2100 Series Photoelectric
  • 2400 Series Photoelectric
  • 1100 Series Ionization

    Four-wire smoke detectors, conventional:
  • 2112/24 Series Photoelectric
  • 1412 Series Ionization

    Horn/Strobes:
  • System Sensor Notification Appliances

    Manual Pull Stations:
  • 5140MPS-1
  • 5140MPS-2

    V-Plex (addressable) Devices:
  • 4208U Loop Expansion Module
    – eight zones
  • 4101SN Single Relay/Zone Module
  • 4208SNF Class A/B Expander Module
  • 4209U Group Zoning Module
    – two/four zones
  • 4190SN Remote Point Module
    – two zones
  • 4193SN Two Zone Serial Interface Module
  • 4293SN One Zone Serial Interface Module
  • 4297 Isolation/Extender Module

    V-Plex (addressable) Smoke Detectors:
  • 5192SD
  • 4192SD
  • 4192CP
  • 5192SDT
  • 4192SDT
  • 4192CPM
  • 4192SDTM

    V-Plex Passive Infrared Detectors:
  • 998MX
  • 4275EX-SN
  • 4278EX-SN

    V-Plex (addressable) Contacts:
  • 4939SN-WH
  • 4944SN-WH
  • 4959SN

    V-Plex Glassbreak Detectors:
  • 9500SN

    VISTA interactive phone module:
  • 4286 Voice Module

    Optional 24V Power Supply:
  • PS24
    – 24V power supply
    – 3.4A

    Long Range Radio:
  • Long Range Radio 7720ULF-XX, 7835C, 7835CF, 7845C

    Upgraded software:
  • Upgraded Compass Downloader Windows compatible

    Wireless Devices:
  • 5804BDV
    – Bi-directional with voice
  • 5804BD
    – Bi-directional Key
  • 5804Watch
    – Wireless Key & sports watch combined
  • 5816
    – Door/Window Transmitter
  • 5804
    – Wireless key
  • 5827BD
    – Bi-directional Keypad
  • 5890
    – PIR
  • 5849
    – Glassbreak Detector
  • 5819
    – Shock Sensor

    Commercial Wireless Devices:
  • 5808W3
    – Photoelectric Smoke/Heat Detector
  • 5809
    – Wireless Heat Detector
  • 5817CB
    – Wireless Commercial Transmitter
  • 5869
    – Hold-Up Transmitter
  • 5881ENHC
    – Commercial Fire/Burg Receiver Access Control
  • VistaKey V-Plex (addressable)

    Access Control:
  • VistaKey-SK Starter Kit
  • VistaKey-EX Expansion Kit
  • VGM Vista Gateway Module to PassPoint Access Control (Northern Computers)

    CCTV:
  • VistaView-100 CCTV Switcher or Module

    Alarm Communications:
  • Graphical user interface with Internet capability
  • Internet Remote Control-Networking Module
  • Internet Alarm Communicator (7845i)
  • 7845GSM
    – Digital Cellular Communicator
  • 7845i-GSM
    – Internet and Digital Cellular Communicator

    Paging:
  • VA8201 AlphaNumeric Pager
  • KIT CONSISTS OF:
  • VISTA-128FBP 12-VOLT FIRE/BURGLARY 128 ZONE COMMERCIAL CONTROL
  • 6160CR KEYPAD, ALPHA, FIRE, RED
  • 6160 ALPHA ENGLISH KEYPAD
  • 4208U 8 ZONE UNIVERSAL EXPANDER

    Commercial Fire and Partitioned Burglary Alarm Control Panel

    Designed to integrate seamlessly with CCTV, access control, and ADEMCO’s full range of fire and burglary components, the NEW VISTA-128FBP provides the ultimate protection of life and property. The UL listed Commercial Fire and Burglary Control Platform controls up to eight partitions, and supports up to 128 zones/points using hardwired, wireless and V-Plex addressable technologies. A diverse line of ADEMCO initiating devices, notification circuits, digital dialers, keypads, RF receivers and relays are supported by extremely powerful control platform. The VISTA-128FBP has been designed to mount quickly and easily in an attack resistant cabinet, and is available in 12V and 24V models. A revolutionary new feature called Panel Linking allows multiple partitions, panels - even buildings to be armed, disarmed and have status checked from one location.

    FEATURES
    • Eight hardwired zones standard, expandable to 120 V-Plex addressable points/zones or 128 wireless points/zones
    • Can control eight separate areas independently (8 partitions)
    • Supports Panel-Linking allows up to 8 systems or buildings to be controlled from one central location (using VA8200)
    • Supports commercial UL wireless fire and burg
    • Stores up to 512 events and can accommodate 150 user codes
    • Supports addressable V-Plex access control points using VistaKey (1 to 8 doors)
    • Supports up to 16 doors of access control using Vista Gateway Module (VGM)*
    • Supports CCTV applications with the new VistaView-100 CCTV Switcher Module
    • Identifies the point or zone of a fire or alarm, using the new FSA-8/FSA-24 Fire System Annunciator
    • Programmable to meet SIA false alarm prevention specifications. To meet UL approval forANSI/SIA CP-01-2000 order part number VISTA-128SIA
    • Two on-board notification (bell) circuits delivering 2.3 amp @ 12V or 3.4 amp @ 24V
    • Automatic smoke detector sensitivity maintenance testing
    • 4-wire smoke reset using onboard J2 output trigger
    • Supports Dynamic Signaling for LRR
    • Supports Remote Control-via the internet**
    • Supports Internet Alarm Reporting**
    • Supports the new Graphical User Interface Consoles
    • Supports up to 250 access card holders using VistaKey
    • Supports AlphaNumeric pager up to 8 different numbers using the VA8201
    * Connects to Northern Computers Passpoint Access Control Systems. Maximum 32 doors.

    ** When used with AlarmNet-i

    ADDITIONAL FEATURES

    • Notification Appliance Circuits (two):
      - Programmable
      - Temporal code compliant
      - Individually silenceable
    • Programmable on-board auxiliary relay
    • SIA false alarm reduction features:
      - Exit error logic
      - Exit delay reset
      - Cross zoning
      - Call waiting defeat
      - Recent close report
    • Supports commercial hardwired, addressable V-Plex polling loop and wireless zones
    • Hardwired zones
      - Provides eight style B hardwired zones
      - EOLR supervised for Fire and UL burglary installations
      - Supports N.O or N.C. sensors
      - Individually assignable to any eight partition
      - Up to 32 two-wire smoke detectors each on zone one and two (64 total)
      - Up to 50 two-wire glassbreak detectors on zone eight
    • Patented addressable V-Plex polling loop technology
      - Supports 120 two-wire zones points
      - Global polling technology for faster processing
      - Increased current draw capacity (128mA)
      - Supervised by panel
      - Individually assignable to partitions, notification circuit (bell) output or aux relay
      - 4,000 ft capability without the use of shielded cable
      - Extender/Isolation bus module
      - Two-wire smoke detector zone/group expansion module adds two or four zones
      - Eight zone - Class A and B extender module
      - Eight zone - Class B extender module
      - One zone supervised contact monitor module
    • UL Listed wireless expansion
      - Supports up to 128 wireless zones/points using 5881ENHC receiver
      - Supervised by control for check-in signals
      - Tamper protection for transmitters
      - Individually assignable up to eight partitions
      - Supports UL864/NFPA approved wireless smoke detectors
    • Access Control integration
      - Full integration with PassPoint Access Control System Complete Gateway interface of VISTA and access functions
    • Up to 8 doors using VistaKey V-Plex Access Control
    • Event reporting
    • Local printer of access or VISTA related event
    • Scheduled uploading of events to central station
    • Stored events for one call retrieval
    • Communication 
      - Phone mapping by zone response type
      - Supports VIP interactive phone voice module
      - Panel operation during download
      - Uploading equipment list to central station
      - Communication to PassPoint via Vista Gateway Module
    • CCTV integration
      - Supports VistaView-100 ECP based CCTV switchers
    APPLICATIONS
    The VISTA-128FBP control is well suited for a variety of applications as an integrated fire and burglary control. A diverse line of ADEMCO initiating devices supports this extremely powerful control. Some of the applications supported are: medical and professional buildings, churches or synagogues, office buildings, schools, strip malls, larger residences and factory or warehouse environments.


    Installation
    The VISTA-128FBP alarm system has been designed to mount both quickly and easily. It meets all applicable requirements for UL commercial fire and burglary installations.

    CONTROL PANEL SPECIFICATIONS:

    Applications:
    The VISTA-128FBP control is well suited for a variety of applications as an integrated fire and burglary control. A diverse line of ADEMCO initiating devices supports this extremely powerful control. Some of the applications supported are: medical and professional buildings, churches or synagogues, office buildings, schools, strip malls, larger residences and factory or warehouse environments.

    Installation: The VISTA-128FBP alarm system has been designed to mount both quickly and easily. It meets all applicable requirements for UL commercial fire and burglary installations.

    Electrical Specifications :
  • Primary power: 18VAC @ 72VA Honeywell No. 1451
  • Control panel quiescent current draw: 350mA
  • Backup battery:
    – 12VDC, 12AH min to 34.4AH max
    – Lead acid battery (gel type)
  • Alarm power: 12VDC, 1.7A max for each notification (bell) circuit output Total 2.3amps @ 12V
  • Aux. standby pwr: 12VDC, 1Amax
  • Total power: 2.3A at 12VDC, 3.4A at 24VDC from all sources
  • Standby time: 24 hours with 1A standby load using 34.4AH battery
  • Fusing: Battery input, aux. and notification (bell) circuit outputs are protected using PTC circuit protectors. All outputs are power limited.
  • Optional 24-volt power supply, PS 24 Supplies two 24 VFW, 1.7A full wave rectified, unfiltered outputsMain Dialer:
  • Line seize: Double Pole
  • Ringer equiv.: 0.7B
  • Formats: ADEMCO Low Speed, ADEMCO 4+2 Express, ADEMCO High Speed, ADEMCO Contact ID, Sescoa and Radionics
  • Dual phone line capability (using 5140DLM module)

    Cabinet dimensions:
  • 18”H X 14.5”W X 4.3”D

    Environmental:
  • Storage temp: 14°F to 158°F (-10°C to 70°C)
  • Operating temp: 32°F to 122°F (0°C to 50°C)
  • Humidity: 85% RH
  • EMI: Meets or exceeds the following requirements:
    – FCC Part 15, Class B Device
    – FCC Part 68
    – IEC EMC Directive

    Agency Listings Burglary:
  • UL609 Grade A Local Mercantile Premises and Mercantile Safe and Vault
  • UL611/1610 Grades A, AA, Central Station
  • UL365 Grades A, AA Police Connect

    Fire:
  • UL864/NFPA72 Local, Central Station and Remote Station
  • Factory Mutual
  • California State Fire Marshal
  • MEA
  • UL985

    Auxiliary Devices:
  • 6160CR
    – Red Alpha Keypad
  • 6139R
    – Red Alpha Keypad/Annunciator
  • FSA-8 & FSA-24 annunciator modules
  • 4204
    – Relay Module, four form C contacts
  • 4204CF
    – Two supervised output circuits
  • 5881 Series
    – RF receiver supporting 5800 wireless detectors
  • 6220S
    – System printer used with 4100SM serial module

    Two-wire smoke detectors, conventional:
  • 2100 Series Photoelectric
  • 2400 Series Photoelectric
  • 1100 Series Ionization

    Four-wire smoke detectors, conventional:
  • 2112/24 Series Photoelectric
  • 1412 Series Ionization

    Horn/Strobes:
  • System Sensor Notification Appliances

    Manual Pull Stations:
  • 5140MPS-1
  • 5140MPS-2

    V-Plex (addressable) Devices:
  • 4208U Loop Expansion Module
    – eight zones
  • 4101SN Single Relay/Zone Module
  • 4208SNF Class A/B Expander Module
  • 4209U Group Zoning Module
    – two/four zones
  • 4190SN Remote Point Module
    – two zones
  • 4193SN Two Zone Serial Interface Module
  • 4293SN One Zone Serial Interface Module
  • 4297 Isolation/Extender Module

    V-Plex (addressable) Smoke Detectors:
  • 5192SD
  • 4192SD
  • 4192CP
  • 5192SDT
  • 4192SDT
  • 4192CPM
  • 4192SDTM

    V-Plex Passive Infrared Detectors:
  • 998MX
  • 4275EX-SN
  • 4278EX-SN

    V-Plex (addressable) Contacts:
  • 4939SN-WH
  • 4944SN-WH
  • 4959SN

    V-Plex Glassbreak Detectors:
  • 9500SN

    VISTA interactive phone module:
  • 4286 Voice Module

    Optional 24V Power Supply:
  • PS24
    – 24V power supply
    – 3.4A

    Long Range Radio:
  • Long Range Radio 7720ULF-XX, 7835C, 7835CF, 7845C

    Upgraded software:
  • Upgraded Compass Downloader Windows compatible

    Wireless Devices:
  • 5804BDV
    – Bi-directional with voice
  • 5804BD
    – Bi-directional Key
  • 5804Watch
    – Wireless Key & sports watch combined
  • 5816
    – Door/Window Transmitter
  • 5804
    – Wireless key
  • 5827BD
    – Bi-directional Keypad
  • 5890
    – PIR
  • 5849
    – Glassbreak Detector
  • 5819
    – Shock Sensor

    Commercial Wireless Devices:
  • 5808W3
    – Photoelectric Smoke/Heat Detector
  • 5809
    – Wireless Heat Detector
  • 5817CB
    – Wireless Commercial Transmitter
  • 5869
    – Hold-Up Transmitter
  • 5881ENHC
    – Commercial Fire/Burg Receiver Access Control
  • VistaKey V-Plex (addressable)

    Access Control:
  • VistaKey-SK Starter Kit
  • VistaKey-EX Expansion Kit
  • VGM Vista Gateway Module to PassPoint Access Control (Northern Computers)

    CCTV:
  • VistaView-100 CCTV Switcher or Module

    Alarm Communications:
  • Graphical user interface with Internet capability
  • Internet Remote Control-Networking Module
  • Internet Alarm Communicator (7845i)
  • 7845GSM
    – Digital Cellular Communicator
  • 7845i-GSM
    – Internet and Digital Cellular Communicator

    Paging:
  • VA8201 AlphaNumeric Pager
  • Ademco / Honeywell V128FBP-KT12 - VISTA-128FBP 12-VOLT  FIRE/BURGLARY 128 ZONE COMMERCIAL CONTROL PANEL + 6160CR  KEYPAD, ALPHA, FIRE, RED  + 5140DLM  SUPERVISED DIALER (FOR 5140XM) + 620  TELCO CONNECTOR CORD + 621  RJ31X TELEPHONE JACK  - V128FBKT1 Ademco / Honeywell V128FBP-KT14 - VISTA-128FBP 12-VOLT  FIRE/BURGLARY 128 ZONE COMMERCIAL CONTROL PANEL + 2 x 6160CR  KEYPADS, ALPHA, FIRE, RED + 5140DLM  SUPERVISED DIALER (FOR 5140XM)  + 4208U  8 ZONE UNIVERSAL EXPANDER + 12BNP  NP712 BATTERY 12V 7
    KIT CONSISTS OF:
  • VISTA-128FBP 12-VOLT FIRE/BURGLARY 128 ZONE COMMERCIAL CONTROL
  • 6160CR KEYPAD, ALPHA, FIRE, RED
  • 5140DLM SUPERVISED DIALER (FOR 5140XM)
  • 620 TELCO CONNECTOR CORD
  • 621 RJ31X TELEPHONE JACK

    Commercial Fire and Partitioned Burglary Alarm Control Panel

    Designed to integrate seamlessly with CCTV, access control, and ADEMCO’s full range of fire and burglary components, the NEW VISTA-128FBP provides the ultimate protection of life and property. The UL listed Commercial Fire and Burglary Control Platform controls up to eight partitions, and supports up to 128 zones/points using hardwired, wireless and V-Plex addressable technologies. A diverse line of ADEMCO initiating devices, notification circuits, digital dialers, keypads, RF receivers and relays are supported by extremely powerful control platform. The VISTA-128FBP has been designed to mount quickly and easily in an attack resistant cabinet, and is available in 12V and 24V models. A revolutionary new feature called Panel Linking allows multiple partitions, panels - even buildings to be armed, disarmed and have status checked from one location.

    FEATURES
    • Eight hardwired zones standard, expandable to 120 V-Plex addressable points/zones or 128 wireless points/zones
    • Can control eight separate areas independently (8 partitions)
    • Supports Panel-Linking allows up to 8 systems or buildings to be controlled from one central location (using VA8200)
    • Supports commercial UL wireless fire and burg
    • Stores up to 512 events and can accommodate 150 user codes
    • Supports addressable V-Plex access control points using VistaKey (1 to 8 doors)
    • Supports up to 16 doors of access control using Vista Gateway Module (VGM)*
    • Supports CCTV applications with the new VistaView-100 CCTV Switcher Module
    • Identifies the point or zone of a fire or alarm, using the new FSA-8/FSA-24 Fire System Annunciator
    • Programmable to meet SIA false alarm prevention specifications. To meet UL approval forANSI/SIA CP-01-2000 order part number VISTA-128SIA
    • Two on-board notification (bell) circuits delivering 2.3 amp @ 12V or 3.4 amp @ 24V
    • Automatic smoke detector sensitivity maintenance testing
    • 4-wire smoke reset using onboard J2 output trigger
    • Supports Dynamic Signaling for LRR
    • Supports Remote Control-via the internet**
    • Supports Internet Alarm Reporting**
    • Supports the new Graphical User Interface Consoles
    • Supports up to 250 access card holders using VistaKey
    • Supports AlphaNumeric pager up to 8 different numbers using the VA8201
    * Connects to Northern Computers Passpoint Access Control Systems. Maximum 32 doors.

    ** When used with AlarmNet-i

    ADDITIONAL FEATURES

    • Notification Appliance Circuits (two):
      - Programmable
      - Temporal code compliant
      - Individually silenceable
    • Programmable on-board auxiliary relay
    • SIA false alarm reduction features:
      - Exit error logic
      - Exit delay reset
      - Cross zoning
      - Call waiting defeat
      - Recent close report
    • Supports commercial hardwired, addressable V-Plex polling loop and wireless zones
    • Hardwired zones
      - Provides eight style B hardwired zones
      - EOLR supervised for Fire and UL burglary installations
      - Supports N.O or N.C. sensors
      - Individually assignable to any eight partition
      - Up to 32 two-wire smoke detectors each on zone one and two (64 total)
      - Up to 50 two-wire glassbreak detectors on zone eight
    • Patented addressable V-Plex polling loop technology
      - Supports 120 two-wire zones points
      - Global polling technology for faster processing
      - Increased current draw capacity (128mA)
      - Supervised by panel
      - Individually assignable to partitions, notification circuit (bell) output or aux relay
      - 4,000 ft capability without the use of shielded cable
      - Extender/Isolation bus module
      - Two-wire smoke detector zone/group expansion module adds two or four zones
      - Eight zone - Class A and B extender module
      - Eight zone - Class B extender module
      - One zone supervised contact monitor module
    • UL Listed wireless expansion
      - Supports up to 128 wireless zones/points using 5881ENHC receiver
      - Supervised by control for check-in signals
      - Tamper protection for transmitters
      - Individually assignable up to eight partitions
      - Supports UL864/NFPA approved wireless smoke detectors
    • Access Control integration
      - Full integration with PassPoint Access Control System Complete Gateway interface of VISTA and access functions
    • Up to 8 doors using VistaKey V-Plex Access Control
    • Event reporting
    • Local printer of access or VISTA related event
    • Scheduled uploading of events to central station
    • Stored events for one call retrieval
    • Communication 
      - Phone mapping by zone response type
      - Supports VIP interactive phone voice module
      - Panel operation during download
      - Uploading equipment list to central station
      - Communication to PassPoint via Vista Gateway Module
    • CCTV integration
      - Supports VistaView-100 ECP based CCTV switchers
    APPLICATIONS
    The VISTA-128FBP control is well suited for a variety of applications as an integrated fire and burglary control. A diverse line of ADEMCO initiating devices supports this extremely powerful control. Some of the applications supported are: medical and professional buildings, churches or synagogues, office buildings, schools, strip malls, larger residences and factory or warehouse environments.


    Installation
    The VISTA-128FBP alarm system has been designed to mount both quickly and easily. It meets all applicable requirements for UL commercial fire and burglary installations.

    CONTROL PANEL SPECIFICATIONS:

    Applications:
    The VISTA-128FBP control is well suited for a variety of applications as an integrated fire and burglary control. A diverse line of ADEMCO initiating devices supports this extremely powerful control. Some of the applications supported are: medical and professional buildings, churches or synagogues, office buildings, schools, strip malls, larger residences and factory or warehouse environments.

    Installation: The VISTA-128FBP alarm system has been designed to mount both quickly and easily. It meets all applicable requirements for UL commercial fire and burglary installations.

    Electrical Specifications :
  • Primary power: 18VAC @ 72VA Honeywell No. 1451
  • Control panel quiescent current draw: 350mA
  • Backup battery:
    – 12VDC, 12AH min to 34.4AH max
    – Lead acid battery (gel type)
  • Alarm power: 12VDC, 1.7A max for each notification (bell) circuit output Total 2.3amps @ 12V
  • Aux. standby pwr: 12VDC, 1Amax
  • Total power: 2.3A at 12VDC, 3.4A at 24VDC from all sources
  • Standby time: 24 hours with 1A standby load using 34.4AH battery
  • Fusing: Battery input, aux. and notification (bell) circuit outputs are protected using PTC circuit protectors. All outputs are power limited.
  • Optional 24-volt power supply, PS 24 Supplies two 24 VFW, 1.7A full wave rectified, unfiltered outputsMain Dialer:
  • Line seize: Double Pole
  • Ringer equiv.: 0.7B
  • Formats: ADEMCO Low Speed, ADEMCO 4+2 Express, ADEMCO High Speed, ADEMCO Contact ID, Sescoa and Radionics
  • Dual phone line capability (using 5140DLM module)

    Cabinet dimensions:
  • 18”H X 14.5”W X 4.3”D

    Environmental:
  • Storage temp: 14°F to 158°F (-10°C to 70°C)
  • Operating temp: 32°F to 122°F (0°C to 50°C)
  • Humidity: 85% RH
  • EMI: Meets or exceeds the following requirements:
    – FCC Part 15, Class B Device
    – FCC Part 68
    – IEC EMC Directive

    Agency Listings Burglary:
  • UL609 Grade A Local Mercantile Premises and Mercantile Safe and Vault
  • UL611/1610 Grades A, AA, Central Station
  • UL365 Grades A, AA Police Connect

    Fire:
  • UL864/NFPA72 Local, Central Station and Remote Station
  • Factory Mutual
  • California State Fire Marshal
  • MEA
  • UL985

    Auxiliary Devices:
  • 6160CR
    – Red Alpha Keypad
  • 6139R
    – Red Alpha Keypad/Annunciator
  • FSA-8 & FSA-24 annunciator modules
  • 4204
    – Relay Module, four form C contacts
  • 4204CF
    – Two supervised output circuits
  • 5881 Series
    – RF receiver supporting 5800 wireless detectors
  • 6220S
    – System printer used with 4100SM serial module

    Two-wire smoke detectors, conventional:
  • 2100 Series Photoelectric
  • 2400 Series Photoelectric
  • 1100 Series Ionization

    Four-wire smoke detectors, conventional:
  • 2112/24 Series Photoelectric
  • 1412 Series Ionization

    Horn/Strobes:
  • System Sensor Notification Appliances

    Manual Pull Stations:
  • 5140MPS-1
  • 5140MPS-2

    V-Plex (addressable) Devices:
  • 4208U Loop Expansion Module
    – eight zones
  • 4101SN Single Relay/Zone Module
  • 4208SNF Class A/B Expander Module
  • 4209U Group Zoning Module
    – two/four zones
  • 4190SN Remote Point Module
    – two zones
  • 4193SN Two Zone Serial Interface Module
  • 4293SN One Zone Serial Interface Module
  • 4297 Isolation/Extender Module

    V-Plex (addressable) Smoke Detectors:
  • 5192SD
  • 4192SD
  • 4192CP
  • 5192SDT
  • 4192SDT
  • 4192CPM
  • 4192SDTM

    V-Plex Passive Infrared Detectors:
  • 998MX
  • 4275EX-SN
  • 4278EX-SN

    V-Plex (addressable) Contacts:
  • 4939SN-WH
  • 4944SN-WH
  • 4959SN

    V-Plex Glassbreak Detectors:
  • 9500SN

    VISTA interactive phone module:
  • 4286 Voice Module

    Optional 24V Power Supply:
  • PS24
    – 24V power supply
    – 3.4A

    Long Range Radio:
  • Long Range Radio 7720ULF-XX, 7835C, 7835CF, 7845C

    Upgraded software:
  • Upgraded Compass Downloader Windows compatible

    Wireless Devices:
  • 5804BDV
    – Bi-directional with voice
  • 5804BD
    – Bi-directional Key
  • 5804Watch
    – Wireless Key & sports watch combined
  • 5816
    – Door/Window Transmitter
  • 5804
    – Wireless key
  • 5827BD
    – Bi-directional Keypad
  • 5890
    – PIR
  • 5849
    – Glassbreak Detector
  • 5819
    – Shock Sensor

    Commercial Wireless Devices:
  • 5808W3
    – Photoelectric Smoke/Heat Detector
  • 5809
    – Wireless Heat Detector
  • 5817CB
    – Wireless Commercial Transmitter
  • 5869
    – Hold-Up Transmitter
  • 5881ENHC
    – Commercial Fire/Burg Receiver Access Control
  • VistaKey V-Plex (addressable)

    Access Control:
  • VistaKey-SK Starter Kit
  • VistaKey-EX Expansion Kit
  • VGM Vista Gateway Module to PassPoint Access Control (Northern Computers)

    CCTV:
  • VistaView-100 CCTV Switcher or Module

    Alarm Communications:
  • Graphical user interface with Internet capability
  • Internet Remote Control-Networking Module
  • Internet Alarm Communicator (7845i)
  • 7845GSM
    – Digital Cellular Communicator
  • 7845i-GSM
    – Internet and Digital Cellular Communicator

    Paging:
  • VA8201 AlphaNumeric Pager
  • KIT CONSISTS OF:
  • VISTA-128FBP 12-VOLT FIRE/BURGLARY 128 ZONE COMMERCIAL CONTROL
  • 2 x 6160CR KEYPADS, ALPHA, FIRE, RED
  • 5140DLM SUPERVISED DIALER (FOR 5140XM)
  • 4208U 8 ZONE UNIVERSAL EXPANDER
  • 712BNP NP712 BATTERY 12V 7AH (PAN)

    Commercial Fire and Partitioned Burglary Alarm Control Panel

    Designed to integrate seamlessly with CCTV, access control, and ADEMCO’s full range of fire and burglary components, the NEW VISTA-128FBP provides the ultimate protection of life and property. The UL listed Commercial Fire and Burglary Control Platform controls up to eight partitions, and supports up to 128 zones/points using hardwired, wireless and V-Plex addressable technologies. A diverse line of ADEMCO initiating devices, notification circuits, digital dialers, keypads, RF receivers and relays are supported by extremely powerful control platform. The VISTA-128FBP has been designed to mount quickly and easily in an attack resistant cabinet, and is available in 12V and 24V models. A revolutionary new feature called Panel Linking allows multiple partitions, panels - even buildings to be armed, disarmed and have status checked from one location.

    FEATURES
    • Eight hardwired zones standard, expandable to 120 V-Plex addressable points/zones or 128 wireless points/zones
    • Can control eight separate areas independently (8 partitions)
    • Supports Panel-Linking allows up to 8 systems or buildings to be controlled from one central location (using VA8200)
    • Supports commercial UL wireless fire and burg
    • Stores up to 512 events and can accommodate 150 user codes
    • Supports addressable V-Plex access control points using VistaKey (1 to 8 doors)
    • Supports up to 16 doors of access control using Vista Gateway Module (VGM)*
    • Supports CCTV applications with the new VistaView-100 CCTV Switcher Module
    • Identifies the point or zone of a fire or alarm, using the new FSA-8/FSA-24 Fire System Annunciator
    • Programmable to meet SIA false alarm prevention specifications. To meet UL approval forANSI/SIA CP-01-2000 order part number VISTA-128SIA
    • Two on-board notification (bell) circuits delivering 2.3 amp @ 12V or 3.4 amp @ 24V
    • Automatic smoke detector sensitivity maintenance testing
    • 4-wire smoke reset using onboard J2 output trigger
    • Supports Dynamic Signaling for LRR
    • Supports Remote Control-via the internet**
    • Supports Internet Alarm Reporting**
    • Supports the new Graphical User Interface Consoles
    • Supports up to 250 access card holders using VistaKey
    • Supports AlphaNumeric pager up to 8 different numbers using the VA8201
    * Connects to Northern Computers Passpoint Access Control Systems. Maximum 32 doors.

    ** When used with AlarmNet-i

    ADDITIONAL FEATURES

    • Notification Appliance Circuits (two):
      - Programmable
      - Temporal code compliant
      - Individually silenceable
    • Programmable on-board auxiliary relay
    • SIA false alarm reduction features:
      - Exit error logic
      - Exit delay reset
      - Cross zoning
      - Call waiting defeat
      - Recent close report
    • Supports commercial hardwired, addressable V-Plex polling loop and wireless zones
    • Hardwired zones
      - Provides eight style B hardwired zones
      - EOLR supervised for Fire and UL burglary installations
      - Supports N.O or N.C. sensors
      - Individually assignable to any eight partition
      - Up to 32 two-wire smoke detectors each on zone one and two (64 total)
      - Up to 50 two-wire glassbreak detectors on zone eight
    • Patented addressable V-Plex polling loop technology
      - Supports 120 two-wire zones points
      - Global polling technology for faster processing
      - Increased current draw capacity (128mA)
      - Supervised by panel
      - Individually assignable to partitions, notification circuit (bell) output or aux relay
      - 4,000 ft capability without the use of shielded cable
      - Extender/Isolation bus module
      - Two-wire smoke detector zone/group expansion module adds two or four zones
      - Eight zone - Class A and B extender module
      - Eight zone - Class B extender module
      - One zone supervised contact monitor module
    • UL Listed wireless expansion
      - Supports up to 128 wireless zones/points using 5881ENHC receiver
      - Supervised by control for check-in signals
      - Tamper protection for transmitters
      - Individually assignable up to eight partitions
      - Supports UL864/NFPA approved wireless smoke detectors
    • Access Control integration
      - Full integration with PassPoint Access Control System Complete Gateway interface of VISTA and access functions
    • Up to 8 doors using VistaKey V-Plex Access Control
    • Event reporting
    • Local printer of access or VISTA related event
    • Scheduled uploading of events to central station
    • Stored events for one call retrieval
    • Communication 
      - Phone mapping by zone response type
      - Supports VIP interactive phone voice module
      - Panel operation during download
      - Uploading equipment list to central station
      - Communication to PassPoint via Vista Gateway Module
    • CCTV integration
      - Supports VistaView-100 ECP based CCTV switchers
    APPLICATIONS
    The VISTA-128FBP control is well suited for a variety of applications as an integrated fire and burglary control. A diverse line of ADEMCO initiating devices supports this extremely powerful control. Some of the applications supported are: medical and professional buildings, churches or synagogues, office buildings, schools, strip malls, larger residences and factory or warehouse environments.


    Installation
    The VISTA-128FBP alarm system has been designed to mount both quickly and easily. It meets all applicable requirements for UL commercial fire and burglary installations.

    CONTROL PANEL SPECIFICATIONS:

    Applications:
    The VISTA-128FBP control is well suited for a variety of applications as an integrated fire and burglary control. A diverse line of ADEMCO initiating devices supports this extremely powerful control. Some of the applications supported are: medical and professional buildings, churches or synagogues, office buildings, schools, strip malls, larger residences and factory or warehouse environments.

    Installation: The VISTA-128FBP alarm system has been designed to mount both quickly and easily. It meets all applicable requirements for UL commercial fire and burglary installations.

    Electrical Specifications :
  • Primary power: 18VAC @ 72VA Honeywell No. 1451
  • Control panel quiescent current draw: 350mA
  • Backup battery:
    – 12VDC, 12AH min to 34.4AH max
    – Lead acid battery (gel type)
  • Alarm power: 12VDC, 1.7A max for each notification (bell) circuit output Total 2.3amps @ 12V
  • Aux. standby pwr: 12VDC, 1Amax
  • Total power: 2.3A at 12VDC, 3.4A at 24VDC from all sources
  • Standby time: 24 hours with 1A standby load using 34.4AH battery
  • Fusing: Battery input, aux. and notification (bell) circuit outputs are protected using PTC circuit protectors. All outputs are power limited.
  • Optional 24-volt power supply, PS 24 Supplies two 24 VFW, 1.7A full wave rectified, unfiltered outputsMain Dialer:
  • Line seize: Double Pole
  • Ringer equiv.: 0.7B
  • Formats: ADEMCO Low Speed, ADEMCO 4+2 Express, ADEMCO High Speed, ADEMCO Contact ID, Sescoa and Radionics
  • Dual phone line capability (using 5140DLM module)

    Cabinet dimensions:
  • 18”H X 14.5”W X 4.3”D

    Environmental:
  • Storage temp: 14°F to 158°F (-10°C to 70°C)
  • Operating temp: 32°F to 122°F (0°C to 50°C)
  • Humidity: 85% RH
  • EMI: Meets or exceeds the following requirements:
    – FCC Part 15, Class B Device
    – FCC Part 68
    – IEC EMC Directive

    Agency Listings Burglary:
  • UL609 Grade A Local Mercantile Premises and Mercantile Safe and Vault
  • UL611/1610 Grades A, AA, Central Station
  • UL365 Grades A, AA Police Connect

    Fire:
  • UL864/NFPA72 Local, Central Station and Remote Station
  • Factory Mutual
  • California State Fire Marshal
  • MEA
  • UL985

    Auxiliary Devices:
  • 6160CR
    – Red Alpha Keypad
  • 6139R
    – Red Alpha Keypad/Annunciator
  • FSA-8 & FSA-24 annunciator modules
  • 4204
    – Relay Module, four form C contacts
  • 4204CF
    – Two supervised output circuits
  • 5881 Series
    – RF receiver supporting 5800 wireless detectors
  • 6220S
    – System printer used with 4100SM serial module

    Two-wire smoke detectors, conventional:
  • 2100 Series Photoelectric
  • 2400 Series Photoelectric
  • 1100 Series Ionization

    Four-wire smoke detectors, conventional:
  • 2112/24 Series Photoelectric
  • 1412 Series Ionization

    Horn/Strobes:
  • System Sensor Notification Appliances

    Manual Pull Stations:
  • 5140MPS-1
  • 5140MPS-2

    V-Plex (addressable) Devices:
  • 4208U Loop Expansion Module
    – eight zones
  • 4101SN Single Relay/Zone Module
  • 4208SNF Class A/B Expander Module
  • 4209U Group Zoning Module
    – two/four zones
  • 4190SN Remote Point Module
    – two zones
  • 4193SN Two Zone Serial Interface Module
  • 4293SN One Zone Serial Interface Module
  • 4297 Isolation/Extender Module

    V-Plex (addressable) Smoke Detectors:
  • 5192SD
  • 4192SD
  • 4192CP
  • 5192SDT
  • 4192SDT
  • 4192CPM
  • 4192SDTM

    V-Plex Passive Infrared Detectors:
  • 998MX
  • 4275EX-SN
  • 4278EX-SN

    V-Plex (addressable) Contacts:
  • 4939SN-WH
  • 4944SN-WH
  • 4959SN

    V-Plex Glassbreak Detectors:
  • 9500SN

    VISTA interactive phone module:
  • 4286 Voice Module

    Optional 24V Power Supply:
  • PS24
    – 24V power supply
    – 3.4A

    Long Range Radio:
  • Long Range Radio 7720ULF-XX, 7835C, 7835CF, 7845C

    Upgraded software:
  • Upgraded Compass Downloader Windows compatible

    Wireless Devices:
  • 5804BDV
    – Bi-directional with voice
  • 5804BD
    – Bi-directional Key
  • 5804Watch
    – Wireless Key & sports watch combined
  • 5816
    – Door/Window Transmitter
  • 5804
    – Wireless key
  • 5827BD
    – Bi-directional Keypad
  • 5890
    – PIR
  • 5849
    – Glassbreak Detector
  • 5819
    – Shock Sensor

    Commercial Wireless Devices:
  • 5808W3
    – Photoelectric Smoke/Heat Detector
  • 5809
    – Wireless Heat Detector
  • 5817CB
    – Wireless Commercial Transmitter
  • 5869
    – Hold-Up Transmitter
  • 5881ENHC
    – Commercial Fire/Burg Receiver Access Control
  • VistaKey V-Plex (addressable)

    Access Control:
  • VistaKey-SK Starter Kit
  • VistaKey-EX Expansion Kit
  • VGM Vista Gateway Module to PassPoint Access Control (Northern Computers)

    CCTV:
  • VistaView-100 CCTV Switcher or Module

    Alarm Communications:
  • Graphical user interface with Internet capability
  • Internet Remote Control-Networking Module
  • Internet Alarm Communicator (7845i)
  • 7845GSM
    – Digital Cellular Communicator
  • 7845i-GSM
    – Internet and Digital Cellular Communicator

    Paging:
  • VA8201 AlphaNumeric Pager
  • Ademco / Honeywell V128FBP-KT15 - VISTA-128FBP 12-VOLT  FIRE/BURGLARY 128 ZONE COMMERCIAL CONTROL PANEL + 6160CR  KEYPAD, ALPHA, FIRE, RED + 5140DLM  SUPERVISED DIALER (FOR 5140XM)  + 4208U  8 ZONE UNIVERSAL EXPANDER + 12BNP  NP712 BATTERY 12V 7AH (P Ademco / Honeywell V128FBP-KT16 - VISTA-128FBP 12-VOLT  FIRE/BURGLARY 128 ZONE COMMERCIAL CONTROL PANEL + 6270 GRAPHIC TOUCH SCREEN KEYPAD - V128FBPKT16
    KIT CONSISTS OF:
  • VISTA-128FBP 12-VOLT FIRE/BURGLARY 128 ZONE COMMERCIAL CONTROL
  • 6160CR KEYPAD, ALPHA, FIRE, RED
  • 5140DLM SUPERVISED DIALER (FOR 5140XM)
  • 4208U 8 ZONE UNIVERSAL EXPANDER
  • 712BNP NP712 BATTERY 12V 7AH (PAN)

    Commercial Fire and Partitioned Burglary Alarm Control Panel

    Designed to integrate seamlessly with CCTV, access control, and ADEMCO’s full range of fire and burglary components, the NEW VISTA-128FBP provides the ultimate protection of life and property. The UL listed Commercial Fire and Burglary Control Platform controls up to eight partitions, and supports up to 128 zones/points using hardwired, wireless and V-Plex addressable technologies. A diverse line of ADEMCO initiating devices, notification circuits, digital dialers, keypads, RF receivers and relays are supported by extremely powerful control platform. The VISTA-128FBP has been designed to mount quickly and easily in an attack resistant cabinet, and is available in 12V and 24V models. A revolutionary new feature called Panel Linking allows multiple partitions, panels - even buildings to be armed, disarmed and have status checked from one location.

    FEATURES
    • Eight hardwired zones standard, expandable to 120 V-Plex addressable points/zones or 128 wireless points/zones
    • Can control eight separate areas independently (8 partitions)
    • Supports Panel-Linking allows up to 8 systems or buildings to be controlled from one central location (using VA8200)
    • Supports commercial UL wireless fire and burg
    • Stores up to 512 events and can accommodate 150 user codes
    • Supports addressable V-Plex access control points using VistaKey (1 to 8 doors)
    • Supports up to 16 doors of access control using Vista Gateway Module (VGM)*
    • Supports CCTV applications with the new VistaView-100 CCTV Switcher Module
    • Identifies the point or zone of a fire or alarm, using the new FSA-8/FSA-24 Fire System Annunciator
    • Programmable to meet SIA false alarm prevention specifications. To meet UL approval forANSI/SIA CP-01-2000 order part number VISTA-128SIA
    • Two on-board notification (bell) circuits delivering 2.3 amp @ 12V or 3.4 amp @ 24V
    • Automatic smoke detector sensitivity maintenance testing
    • 4-wire smoke reset using onboard J2 output trigger
    • Supports Dynamic Signaling for LRR
    • Supports Remote Control-via the internet**
    • Supports Internet Alarm Reporting**
    • Supports the new Graphical User Interface Consoles
    • Supports up to 250 access card holders using VistaKey
    • Supports AlphaNumeric pager up to 8 different numbers using the VA8201
    * Connects to Northern Computers Passpoint Access Control Systems. Maximum 32 doors.

    ** When used with AlarmNet-i

    ADDITIONAL FEATURES

    • Notification Appliance Circuits (two):
      - Programmable
      - Temporal code compliant
      - Individually silenceable
    • Programmable on-board auxiliary relay
    • SIA false alarm reduction features:
      - Exit error logic
      - Exit delay reset
      - Cross zoning
      - Call waiting defeat
      - Recent close report
    • Supports commercial hardwired, addressable V-Plex polling loop and wireless zones
    • Hardwired zones
      - Provides eight style B hardwired zones
      - EOLR supervised for Fire and UL burglary installations
      - Supports N.O or N.C. sensors
      - Individually assignable to any eight partition
      - Up to 32 two-wire smoke detectors each on zone one and two (64 total)
      - Up to 50 two-wire glassbreak detectors on zone eight
    • Patented addressable V-Plex polling loop technology
      - Supports 120 two-wire zones points
      - Global polling technology for faster processing
      - Increased current draw capacity (128mA)
      - Supervised by panel
      - Individually assignable to partitions, notification circuit (bell) output or aux relay
      - 4,000 ft capability without the use of shielded cable
      - Extender/Isolation bus module
      - Two-wire smoke detector zone/group expansion module adds two or four zones
      - Eight zone - Class A and B extender module
      - Eight zone - Class B extender module
      - One zone supervised contact monitor module
    • UL Listed wireless expansion
      - Supports up to 128 wireless zones/points using 5881ENHC receiver
      - Supervised by control for check-in signals
      - Tamper protection for transmitters
      - Individually assignable up to eight partitions
      - Supports UL864/NFPA approved wireless smoke detectors
    • Access Control integration
      - Full integration with PassPoint Access Control System Complete Gateway interface of VISTA and access functions
    • Up to 8 doors using VistaKey V-Plex Access Control
    • Event reporting
    • Local printer of access or VISTA related event
    • Scheduled uploading of events to central station
    • Stored events for one call retrieval
    • Communication 
      - Phone mapping by zone response type
      - Supports VIP interactive phone voice module
      - Panel operation during download
      - Uploading equipment list to central station
      - Communication to PassPoint via Vista Gateway Module
    • CCTV integration
      - Supports VistaView-100 ECP based CCTV switchers
    APPLICATIONS
    The VISTA-128FBP control is well suited for a variety of applications as an integrated fire and burglary control. A diverse line of ADEMCO initiating devices supports this extremely powerful control. Some of the applications supported are: medical and professional buildings, churches or synagogues, office buildings, schools, strip malls, larger residences and factory or warehouse environments.


    Installation
    The VISTA-128FBP alarm system has been designed to mount both quickly and easily. It meets all applicable requirements for UL commercial fire and burglary installations.

    CONTROL PANEL SPECIFICATIONS:

    Applications:
    The VISTA-128FBP control is well suited for a variety of applications as an integrated fire and burglary control. A diverse line of ADEMCO initiating devices supports this extremely powerful control. Some of the applications supported are: medical and professional buildings, churches or synagogues, office buildings, schools, strip malls, larger residences and factory or warehouse environments.

    Installation: The VISTA-128FBP alarm system has been designed to mount both quickly and easily. It meets all applicable requirements for UL commercial fire and burglary installations.

    Electrical Specifications :
  • Primary power: 18VAC @ 72VA Honeywell No. 1451
  • Control panel quiescent current draw: 350mA
  • Backup battery:
    – 12VDC, 12AH min to 34.4AH max
    – Lead acid battery (gel type)
  • Alarm power: 12VDC, 1.7A max for each notification (bell) circuit output Total 2.3amps @ 12V
  • Aux. standby pwr: 12VDC, 1Amax
  • Total power: 2.3A at 12VDC, 3.4A at 24VDC from all sources
  • Standby time: 24 hours with 1A standby load using 34.4AH battery
  • Fusing: Battery input, aux. and notification (bell) circuit outputs are protected using PTC circuit protectors. All outputs are power limited.
  • Optional 24-volt power supply, PS 24 Supplies two 24 VFW, 1.7A full wave rectified, unfiltered outputsMain Dialer:
  • Line seize: Double Pole
  • Ringer equiv.: 0.7B
  • Formats: ADEMCO Low Speed, ADEMCO 4+2 Express, ADEMCO High Speed, ADEMCO Contact ID, Sescoa and Radionics
  • Dual phone line capability (using 5140DLM module)

    Cabinet dimensions:
  • 18”H X 14.5”W X 4.3”D

    Environmental:
  • Storage temp: 14°F to 158°F (-10°C to 70°C)
  • Operating temp: 32°F to 122°F (0°C to 50°C)
  • Humidity: 85% RH
  • EMI: Meets or exceeds the following requirements:
    – FCC Part 15, Class B Device
    – FCC Part 68
    – IEC EMC Directive

    Agency Listings Burglary:
  • UL609 Grade A Local Mercantile Premises and Mercantile Safe and Vault
  • UL611/1610 Grades A, AA, Central Station
  • UL365 Grades A, AA Police Connect

    Fire:
  • UL864/NFPA72 Local, Central Station and Remote Station
  • Factory Mutual
  • California State Fire Marshal
  • MEA
  • UL985

    Auxiliary Devices:
  • 6160CR
    – Red Alpha Keypad
  • 6139R
    – Red Alpha Keypad/Annunciator
  • FSA-8 & FSA-24 annunciator modules
  • 4204
    – Relay Module, four form C contacts
  • 4204CF
    – Two supervised output circuits
  • 5881 Series
    – RF receiver supporting 5800 wireless detectors
  • 6220S
    – System printer used with 4100SM serial module

    Two-wire smoke detectors, conventional:
  • 2100 Series Photoelectric
  • 2400 Series Photoelectric
  • 1100 Series Ionization

    Four-wire smoke detectors, conventional:
  • 2112/24 Series Photoelectric
  • 1412 Series Ionization

    Horn/Strobes:
  • System Sensor Notification Appliances

    Manual Pull Stations:
  • 5140MPS-1
  • 5140MPS-2

    V-Plex (addressable) Devices:
  • 4208U Loop Expansion Module
    – eight zones
  • 4101SN Single Relay/Zone Module
  • 4208SNF Class A/B Expander Module
  • 4209U Group Zoning Module
    – two/four zones
  • 4190SN Remote Point Module
    – two zones
  • 4193SN Two Zone Serial Interface Module
  • 4293SN One Zone Serial Interface Module
  • 4297 Isolation/Extender Module

    V-Plex (addressable) Smoke Detectors:
  • 5192SD
  • 4192SD
  • 4192CP
  • 5192SDT
  • 4192SDT
  • 4192CPM
  • 4192SDTM

    V-Plex Passive Infrared Detectors:
  • 998MX
  • 4275EX-SN
  • 4278EX-SN

    V-Plex (addressable) Contacts:
  • 4939SN-WH
  • 4944SN-WH
  • 4959SN

    V-Plex Glassbreak Detectors:
  • 9500SN

    VISTA interactive phone module:
  • 4286 Voice Module

    Optional 24V Power Supply:
  • PS24
    – 24V power supply
    – 3.4A

    Long Range Radio:
  • Long Range Radio 7720ULF-XX, 7835C, 7835CF, 7845C

    Upgraded software:
  • Upgraded Compass Downloader Windows compatible

    Wireless Devices:
  • 5804BDV
    – Bi-directional with voice
  • 5804BD
    – Bi-directional Key
  • 5804Watch
    – Wireless Key & sports watch combined
  • 5816
    – Door/Window Transmitter
  • 5804
    – Wireless key
  • 5827BD
    – Bi-directional Keypad
  • 5890
    – PIR
  • 5849
    – Glassbreak Detector
  • 5819
    – Shock Sensor

    Commercial Wireless Devices:
  • 5808W3
    – Photoelectric Smoke/Heat Detector
  • 5809
    – Wireless Heat Detector
  • 5817CB
    – Wireless Commercial Transmitter
  • 5869
    – Hold-Up Transmitter
  • 5881ENHC
    – Commercial Fire/Burg Receiver Access Control
  • VistaKey V-Plex (addressable)

    Access Control:
  • VistaKey-SK Starter Kit
  • VistaKey-EX Expansion Kit
  • VGM Vista Gateway Module to PassPoint Access Control (Northern Computers)

    CCTV:
  • VistaView-100 CCTV Switcher or Module

    Alarm Communications:
  • Graphical user interface with Internet capability
  • Internet Remote Control-Networking Module
  • Internet Alarm Communicator (7845i)
  • 7845GSM
    – Digital Cellular Communicator
  • 7845i-GSM
    – Internet and Digital Cellular Communicator

    Paging:
  • VA8201 AlphaNumeric Pager
  • KIT CONSISTS OF:
  • VISTA-128FBP 12-VOLT FIRE/BURGLARY 128 ZONE COMMERCIAL CONTROL
  • 6270 GRAPHIC TOUCH SCREEN KEYPAD

    Commercial Fire and Partitioned Burglary Alarm Control Panel

    Designed to integrate seamlessly with CCTV, access control, and ADEMCO’s full range of fire and burglary components, the NEW VISTA-128FBP provides the ultimate protection of life and property. The UL listed Commercial Fire and Burglary Control Platform controls up to eight partitions, and supports up to 128 zones/points using hardwired, wireless and V-Plex addressable technologies. A diverse line of ADEMCO initiating devices, notification circuits, digital dialers, keypads, RF receivers and relays are supported by extremely powerful control platform. The VISTA-128FBP has been designed to mount quickly and easily in an attack resistant cabinet, and is available in 12V and 24V models. A revolutionary new feature called Panel Linking allows multiple partitions, panels - even buildings to be armed, disarmed and have status checked from one location.

    FEATURES
    • Eight hardwired zones standard, expandable to 120 V-Plex addressable points/zones or 128 wireless points/zones
    • Can control eight separate areas independently (8 partitions)
    • Supports Panel-Linking allows up to 8 systems or buildings to be controlled from one central location (using VA8200)
    • Supports commercial UL wireless fire and burg
    • Stores up to 512 events and can accommodate 150 user codes
    • Supports addressable V-Plex access control points using VistaKey (1 to 8 doors)
    • Supports up to 16 doors of access control using Vista Gateway Module (VGM)*
    • Supports CCTV applications with the new VistaView-100 CCTV Switcher Module
    • Identifies the point or zone of a fire or alarm, using the new FSA-8/FSA-24 Fire System Annunciator
    • Programmable to meet SIA false alarm prevention specifications. To meet UL approval forANSI/SIA CP-01-2000 order part number VISTA-128SIA
    • Two on-board notification (bell) circuits delivering 2.3 amp @ 12V or 3.4 amp @ 24V
    • Automatic smoke detector sensitivity maintenance testing
    • 4-wire smoke reset using onboard J2 output trigger
    • Supports Dynamic Signaling for LRR
    • Supports Remote Control-via the internet**
    • Supports Internet Alarm Reporting**
    • Supports the new Graphical User Interface Consoles
    • Supports up to 250 access card holders using VistaKey
    • Supports AlphaNumeric pager up to 8 different numbers using the VA8201
    * Connects to Northern Computers Passpoint Access Control Systems. Maximum 32 doors.

    ** When used with AlarmNet-i

    ADDITIONAL FEATURES

    • Notification Appliance Circuits (two):
      - Programmable
      - Temporal code compliant
      - Individually silenceable
    • Programmable on-board auxiliary relay
    • SIA false alarm reduction features:
      - Exit error logic
      - Exit delay reset
      - Cross zoning
      - Call waiting defeat
      - Recent close report
    • Supports commercial hardwired, addressable V-Plex polling loop and wireless zones
    • Hardwired zones
      - Provides eight style B hardwired zones
      - EOLR supervised for Fire and UL burglary installations
      - Supports N.O or N.C. sensors
      - Individually assignable to any eight partition
      - Up to 32 two-wire smoke detectors each on zone one and two (64 total)
      - Up to 50 two-wire glassbreak detectors on zone eight
    • Patented addressable V-Plex polling loop technology
      - Supports 120 two-wire zones points
      - Global polling technology for faster processing
      - Increased current draw capacity (128mA)
      - Supervised by panel
      - Individually assignable to partitions, notification circuit (bell) output or aux relay
      - 4,000 ft capability without the use of shielded cable
      - Extender/Isolation bus module
      - Two-wire smoke detector zone/group expansion module adds two or four zones
      - Eight zone - Class A and B extender module
      - Eight zone - Class B extender module
      - One zone supervised contact monitor module
    • UL Listed wireless expansion
      - Supports up to 128 wireless zones/points using 5881ENHC receiver
      - Supervised by control for check-in signals
      - Tamper protection for transmitters
      - Individually assignable up to eight partitions
      - Supports UL864/NFPA approved wireless smoke detectors
    • Access Control integration
      - Full integration with PassPoint Access Control System Complete Gateway interface of VISTA and access functions
    • Up to 8 doors using VistaKey V-Plex Access Control
    • Event reporting
    • Local printer of access or VISTA related event
    • Scheduled uploading of events to central station
    • Stored events for one call retrieval
    • Communication 
      - Phone mapping by zone response type
      - Supports VIP interactive phone voice module
      - Panel operation during download
      - Uploading equipment list to central station
      - Communication to PassPoint via Vista Gateway Module
    • CCTV integration
      - Supports VistaView-100 ECP based CCTV switchers
    APPLICATIONS
    The VISTA-128FBP control is well suited for a variety of applications as an integrated fire and burglary control. A diverse line of ADEMCO initiating devices supports this extremely powerful control. Some of the applications supported are: medical and professional buildings, churches or synagogues, office buildings, schools, strip malls, larger residences and factory or warehouse environments.


    Installation
    The VISTA-128FBP alarm system has been designed to mount both quickly and easily. It meets all applicable requirements for UL commercial fire and burglary installations.

    CONTROL PANEL SPECIFICATIONS:

    Applications:
    The VISTA-128FBP control is well suited for a variety of applications as an integrated fire and burglary control. A diverse line of ADEMCO initiating devices supports this extremely powerful control. Some of the applications supported are: medical and professional buildings, churches or synagogues, office buildings, schools, strip malls, larger residences and factory or warehouse environments.

    Installation: The VISTA-128FBP alarm system has been designed to mount both quickly and easily. It meets all applicable requirements for UL commercial fire and burglary installations.

    Electrical Specifications :
  • Primary power: 18VAC @ 72VA Honeywell No. 1451
  • Control panel quiescent current draw: 350mA
  • Backup battery:
    – 12VDC, 12AH min to 34.4AH max
    – Lead acid battery (gel type)
  • Alarm power: 12VDC, 1.7A max for each notification (bell) circuit output Total 2.3amps @ 12V
  • Aux. standby pwr: 12VDC, 1Amax
  • Total power: 2.3A at 12VDC, 3.4A at 24VDC from all sources
  • Standby time: 24 hours with 1A standby load using 34.4AH battery
  • Fusing: Battery input, aux. and notification (bell) circuit outputs are protected using PTC circuit protectors. All outputs are power limited.
  • Optional 24-volt power supply, PS 24 Supplies two 24 VFW, 1.7A full wave rectified, unfiltered outputsMain Dialer:
  • Line seize: Double Pole
  • Ringer equiv.: 0.7B
  • Formats: ADEMCO Low Speed, ADEMCO 4+2 Express, ADEMCO High Speed, ADEMCO Contact ID, Sescoa and Radionics
  • Dual phone line capability (using 5140DLM module)

    Cabinet dimensions:
  • 18”H X 14.5”W X 4.3”D

    Environmental:
  • Storage temp: 14°F to 158°F (-10°C to 70°C)
  • Operating temp: 32°F to 122°F (0°C to 50°C)
  • Humidity: 85% RH
  • EMI: Meets or exceeds the following requirements:
    – FCC Part 15, Class B Device
    – FCC Part 68
    – IEC EMC Directive

    Agency Listings Burglary:
  • UL609 Grade A Local Mercantile Premises and Mercantile Safe and Vault
  • UL611/1610 Grades A, AA, Central Station
  • UL365 Grades A, AA Police Connect

    Fire:
  • UL864/NFPA72 Local, Central Station and Remote Station
  • Factory Mutual
  • California State Fire Marshal
  • MEA
  • UL985

    Auxiliary Devices:
  • 6160CR
    – Red Alpha Keypad
  • 6139R
    – Red Alpha Keypad/Annunciator
  • FSA-8 & FSA-24 annunciator modules
  • 4204
    – Relay Module, four form C contacts
  • 4204CF
    – Two supervised output circuits
  • 5881 Series
    – RF receiver supporting 5800 wireless detectors
  • 6220S
    – System printer used with 4100SM serial module

    Two-wire smoke detectors, conventional:
  • 2100 Series Photoelectric
  • 2400 Series Photoelectric
  • 1100 Series Ionization

    Four-wire smoke detectors, conventional:
  • 2112/24 Series Photoelectric
  • 1412 Series Ionization

    Horn/Strobes:
  • System Sensor Notification Appliances

    Manual Pull Stations:
  • 5140MPS-1
  • 5140MPS-2

    V-Plex (addressable) Devices:
  • 4208U Loop Expansion Module
    – eight zones
  • 4101SN Single Relay/Zone Module
  • 4208SNF Class A/B Expander Module
  • 4209U Group Zoning Module
    – two/four zones
  • 4190SN Remote Point Module
    – two zones
  • 4193SN Two Zone Serial Interface Module
  • 4293SN One Zone Serial Interface Module
  • 4297 Isolation/Extender Module

    V-Plex (addressable) Smoke Detectors:
  • 5192SD
  • 4192SD
  • 4192CP
  • 5192SDT
  • 4192SDT
  • 4192CPM
  • 4192SDTM

    V-Plex Passive Infrared Detectors:
  • 998MX
  • 4275EX-SN
  • 4278EX-SN

    V-Plex (addressable) Contacts:
  • 4939SN-WH
  • 4944SN-WH
  • 4959SN

    V-Plex Glassbreak Detectors:
  • 9500SN

    VISTA interactive phone module:
  • 4286 Voice Module

    Optional 24V Power Supply:
  • PS24
    – 24V power supply
    – 3.4A

    Long Range Radio:
  • Long Range Radio 7720ULF-XX, 7835C, 7835CF, 7845C

    Upgraded software:
  • Upgraded Compass Downloader Windows compatible

    Wireless Devices:
  • 5804BDV
    – Bi-directional with voice
  • 5804BD
    – Bi-directional Key
  • 5804Watch
    – Wireless Key & sports watch combined
  • 5816
    – Door/Window Transmitter
  • 5804
    – Wireless key
  • 5827BD
    – Bi-directional Keypad
  • 5890
    – PIR
  • 5849
    – Glassbreak Detector
  • 5819
    – Shock Sensor

    Commercial Wireless Devices:
  • 5808W3
    – Photoelectric Smoke/Heat Detector
  • 5809
    – Wireless Heat Detector
  • 5817CB
    – Wireless Commercial Transmitter
  • 5869
    – Hold-Up Transmitter
  • 5881ENHC
    – Commercial Fire/Burg Receiver Access Control
  • VistaKey V-Plex (addressable)

    Access Control:
  • VistaKey-SK Starter Kit
  • VistaKey-EX Expansion Kit
  • VGM Vista Gateway Module to PassPoint Access Control (Northern Computers)

    CCTV:
  • VistaView-100 CCTV Switcher or Module

    Alarm Communications:
  • Graphical user interface with Internet capability
  • Internet Remote Control-Networking Module
  • Internet Alarm Communicator (7845i)
  • 7845GSM
    – Digital Cellular Communicator
  • 7845i-GSM
    – Internet and Digital Cellular Communicator

    Paging:
  • VA8201 AlphaNumeric Pager
  •    
     
    Fire Alarm Control Panels
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please