Home > Shop Brands > FireLite Alarms by Honeywell >

  FireLite BEAM355S Beam Smoke Detector

FireLite BEAM355S Beam Smoke Detector


 

Our Price : $1,049.04


Product Code: BEAM355S

Qty:

Description
 
The FireLite BEAM355 and BEAM355S are intelligent, addressable reflected beam smoke detectors for protecting open areas with high and sloping ceilings, and wide-open areas, where spot-type smoke detectors are difficult to install and maintain. Ideal applications are atriums, cathedral ceilings, aircraft hangars, warehouses, sporting arenas, concert halls, and enclosed parking facilities. They are compatible with the MS-9600 Series and MS9200 Series in LiteSpeed or CLIP mode. Installation of the single-ended reflective design is much quicker than a dual-ended projected beam detector. Alignment is easily accomplished with an optical sight and a two-digit signal strength meter incorporated into the beam detector. Listed for operation from -22°F to 131°F, the BEAM355 and BEAM355S are usable in open area applications where temperature extremes exceed the design limits of other types of smoke detection.

The BEAM355 and BEAM355S are a transmitter/receiver unit and a reflector. When smoke enters the area between the unit and the reflector it causes a reduction in the signal strength. When the smoke level (signal strength) reaches the predetermined threshold, an alarm is activated. The detectors have four standard sensitivity selections as well as two Acclimate settings. When either Acclimate setting is selected, the detector’s advanced software algorithms automatically adjust to the optimum sensitivity for the specific environment.

The BEAM355S has an integral sensitivity test feature of a filter attached to a servomotor inside the detector optics. Activation of the RTS151 or RTS151KEY remote test stations moves the filter into the pathway of the light beam, testing the detector’s sensitivity. This sensitivity test feature allows the user to quickly and easily meet the annual maintenance and test requirements of NFPA 72, without physical access to the detector. The servomotor must be powered by +24 VDC, not SLC power.

Specifications:

Protection Range: 16 to 230 feet (5 to 70 m), 230 to 328 feet (70 to 100 m) using optional BEAMLRK kit.
Adjustment Angle: ±10° horizontal and vertical. Note that the optics move independently of the unit.

Sensitivity (6 levels):
-Level 1 — 25%.
-Level 2 — 30%.
-Level 3 — 40%.
-Level 4 — 50%.
-Acclimate Level 5 — 30% to 50%.
-Acclimate Level 6 — 40% to 50%.

Fault Condition (trouble):
-96% or more obscuration blockage.
-In alignment mode.
-Improper initial alignment.
-Self-compensation limit reached.

Alignment Aid:
-Optical gunsight.
-Integral signal strength indication.
-Two-digit display.

Indicators:
-Alarm — local red LED and remote alarm.
-Trouble — local yellow LED and remote trouble.
-Normal — local flashing green LED.
Features
  • Listed to UL 268, ULC CAN/ULC S529.
  • Transmitter/receiver built into same unit.
  • Six user-selectable sensitivity levels.
  • 16' to 328' (use BEAMLRK beyond 230') protection range.
  • Removable plug-in terminal blocks.
  • Digital display — no special tools required.
  • Built-in automatic gain control compensates for signal deterioration from dust buildup.
  • Optional remote test station.
  • Optional long-range kit (BEAMLRK) for applications in excess of 230' (70 m).
  • Optional multi-mount kit (BEAMMMK) providing ceiling or wall mount capability with increased angular adjustment.
  • Optional heater kits (BEAMHK and BEAMHKR) for prevention of condensation (not intended to increase or reduce the specified operating temperature).
  • Paintable cover.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > FireLite Alarms by Honeywell
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please