Home > Shop Brands > FireLite Alarms by Honeywell >

  FireLite LCD40 Fire Alarm LCD Annunciator

FireLite LCD40 Fire Alarm LCD Annunciator


 

Our Price : $464.00


Product Code: LCD40

DISCONTINUED. No longer in stock.

Description
 
The Fire Lite LCD-40 Series are compact, cost-effective, 40 character, backlit LCD Fire Annunciators for use with the MicroScan-9200 Addressable Fire Alarm Control Panel. The LCD-40 Series consists of two models: the basic LCD-40 and the low-cost LCD-40L. The LCD-40 Series can display English-language text of system point status, including: device type, independent point alarm, trouble or supervisory, zone and custom alpha labels programmed into the MS-9200. The LCD-40 Series also provides system status LEDs to display Power, Alarm, Trouble and Supervisory. Remote control of critical system functions (Reset, Silence, Acknowledge, and Drill) can be accomplished with the model LCD-40 only.

The LCD-40 Series annunciators provide the MS-9200 Addressable FACP with point annunciation, displayed in English language text on a 40-character LCD display. The LCD-40 Series annunciators also provide an array of LEDs to indicate system status, while the LCD-40 also includes control switches for remote control of critical system functions.

The LCD-40 Series provides the MS-9200 with up to 32 remote serially connected annunciators. All field-wiring terminations on the LCD-40 Series use removable, compressiontype terminal blocks for ease of wiring and circuit testing.

Communications between the FACP and the annunciators are accomplished over an EIA-485 serial interface, greatly reducing wire and installation cost over traditional systems. Six wires total are required: two for the EIA-485 communications in (twisted-pair), two for the EIA-485 communications return (twisted-pair from last LCD-40(L) on loop) and two for 24 VDC regulated power. Dip switches control local functions such as: piezo disable, control switches/key switch disable, transmit/receive mode. Annunciators may be powered from the host MS-9200 or remote power supplies (requires filtered, regulated power).
Features
  • English language, 40 character (20 characters x 2 lines) backlit, Liquid Crystal Display.
  • Control switches for System Acknowledge, Signal Silence, Drill and Reset with enable key are included on the model LCD-40 only (shown).
  • Both models include system status LEDs for Power, Alarm, Trouble and Supervisory.
  • No programming LCD mimics the MS-9200 display.
  • Displays device type identifiers, individual point alarm, trouble or supervisory, zone and custom alpha labels.
  • Time and date display field.
  • Aesthetically pleasing, semi-flush mount design.
  • Serial EIA-485 interface for reduced installation cost (see reverse side for wiring diagram).
  • May be powered by 24 VDC from the host FACP or by remote power supplies (requires filtered, regulated power).
  • Up to 32 LCD-40 Series annunciators per MS-9200.
  • Plug-in terminal blocks for easy installation and service.
  • Can be remotely located up to 3,000 feet (914.4 m) from host control panel.
  • Local piezo sounder with alarm and trouble resound.
  • Semi-flush-mounts to 2-3/16"/55.5625 mm (minimum) deep, three-gang electrical box (P/N 10103); or surfacemounts to Fire
  • Lite SBB-3 surface backbox.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > FireLite Alarms by Honeywell
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please