Home > Shop Brands > FireLite Alarms by Honeywell >

  FireLite SD355R Photo Smoke Detectors With Remote Test

FireLite SD355R Photo Smoke Detectors With Remote Test


 

Our Price : $59.05


Product Code: SD355R

Qty:

Description
 
The SD355(A), SD355T(A), and SD355R(A) addressable, lowprofile plug-in photoelectric detectors use a state-of-the-art photoelectric sensing chamber with communications to provide open area protection and are used exclusively with Fire-Lites Addressable Fire Alarm Control Panels (FACPs). The SD355T(A) adds thermal sensors that will alarm at a fixed temperature of 135F (57C). Since these detectors are addressable, they will help emergency personnel quickly locate a fire during its early stages, potentially saving precious rescue time while also reducing property damage. Two LEDs on each sensor light to provide a local, visible sensor indication. Remote LED annunciator capability is available as an optional accessory, PN RA100Z(A). The SD355R(A) is a remote test capable detector for use with D355PL(A) or DNR(A)/DNRW duct smoke detector housings.

Specifications:

Voltage range: 15 -32 VDC (peak).
Standby current: 300 ?A @ 24 VDC.
LED current: 6.5 mA @ 24 VDC (latched "ON").
Air velocity: 4,000 ft./min. (20 m/sec.) maximum.
Size: 2.1" (5.33 cm) high; base determines diameter.
-B210LP(A): 6.1" (15.5 cm) diameter.
-B501(A): 4.1" (10.4 cm) diameter.
-B200SR(A): 6.875" (17.46 cm) diameter.
-B224RB(A): 6.2" (15.748 cm) diameter.
Weight: 3.6 oz. (102 g).
Operating temperature range: for SD355(A): 0C to 49C (32F to 120F); for SD355T(A): 0C to 38C (32F to 100F). SD355R(A): installed in a DNR(A)/DNRW -20C to 70C (-4F to 158F).
Temperature: 0C -49C (32F -120F).
Relative humidity: 10% -93%, non-condensing

Listings:

Listings and approvals below apply to the SD355(A), SD355T(A), and SD355RT(A) detectors. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status.

UL Listed: S1059.
ULC Listed: S1059.
CSFM: 7272-0075:0194.
MEA: 243-02-E.
FM approved.
Features
  • SLC loop:
  • -Two-wire loop connection.
  • -Unit uses base for wiring.
  • Addressing:
  • -Addressable by device.
  • -Rotary, decimal addressing: 01 -99 with MS-9200 series, and 01 -159 with MS-9600 series.
  • Architecture:
  • -Unique single-source, dual-chamber design to respond quickly and dependably to a broad range of fires.
  • -Sleek, low-profile design.
  • -Integral communications and built-in type identification.
  • -Built-in tamper-resistant feature.
  • -Removable cover and insect-resistant screen for simple field cleaning.
  • Operation:
  • -Withstands air velocities up to 4,000 feet-per-minute (20 m/sec.) without triggering a false alarm.
  • -Factory preset at 1.5% nominal sensitivity for panel alarm threshold level.
  • -Visible LED "blinks" when the unit is addressed (communicating with the fire panel) and latches on in alarm.
  • Mechanicals:
  • -Sealed against back pressure.
  • -Direct surface mounting or electrical box mounting.
  • -Mounts to: single-gang box, 3.5" (8.89 cm) or 4.0" (10.16 cm) octagonal box, or 4.0" (10.16 cm) square electrical box (using a plaster ring included).
  • Other system features:
  • -Fully coated circuit boards and superior RF/transient protection.
  • -94-V0 plastic flammability rating.
  • -Low standby current.
  • Options:
  • -Remote LED output connection, PN RA100Z(A).

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > FireLite Alarms by Honeywell
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please