Follow Security_USA on Twitter

Internet Security Systems Inc. on LinkedIn

You are here: Home > Shop By Brand > FireLite Alarms by Honeywell

We found 236 results matching your criteria.

FireLite Alarms by Honeywell

Addressable Detectors and Modules

Addressable Fire Alarm Control Panels

Conventional Fire Alarm Control Panels

Digital Alarm Communicator Transmitters (DACT)

Emergency Voice Evacuation Panels

Fire Alarm Control Panels w/with Built-In Communicators

LCD Fire Annunciator

LED Annunciators & Relays

Manual Pull Stations

Power Supplies and Chargers

Suppression Control Panels

Upload/Download Software

Firelite Alarms

Firelite Alarms – Buy FireLite Alarms by Honeywell at discounted prices here. Firelite is known to be a great brand out there on the market.

Addressable Detectors and Modules

Addressable Fire Alarm Control Panels

Conventional Fire Alarm Control Panels

Digital Alarm Communicator Transmitters (DACT)

Emergency Voice Evacuation Panels

Fire Alarm Control Panels w/with Built-In Communicators

LCD Fire Annunciator

LED Annunciators & Relays

Manual Pull Stations

Power Supplies and Chargers

Suppression Control Panels

Fire-Lite Alarms - Suppression Control Panels

Upload/Download Software

Sort By:

Page of 20


Fire Lite MRP-2001 Deluge - Preaction Control Panel - FL-MRP2001 120 VAC, 60 Hz, 3.66 amps Our Price: $587.35		Fire-Lite Alarms FPJF Remote Phone Jack for ACCFFT Our Price: $88.54

The MRP-2001 is a six-zone FACP for single and dual hazard deluge and preaction applications. The MRP-2001 provides reliable fire detection, signaling and protection for commercial, industrial and institutional buildings requiring water-based releasing. The MRP-2001 is compatible with System Sensor�s i3 detectors which are conventional smoke detectors that can transmit a maintenance trouble signal to the FACP indicating the need for cleaning and a supervisory �freeze� signal when the ambient temperature falls below the detector rating of approximately 45�F (7.22�C). In addition, the control panel is compatible with conventional input devices such as two-wire smoke detectors, four-wire smoke detectors, pull stations, waterflow devices, tamper switches and other normally-open contact devices. Refer to the Fire�Lite Device Compatibility Document for a complete listing of compatible devices. Four outputs are programmable as NACs (Notification Appliance Circuits) or releasing circuits. Three programmable Form-C relays (factory programmed for Alarm, Trouble and Supervisory) and 24 VDC special application resettable and non-resettable power outputs are also included on the main circuit board. The MRP-2001 supervises all wiring, AC voltage, battery charger and battery level. Activation of a compatible smoke detector or any normallyopen fire alarm initiating device will activate audible and visual signaling devices, illuminate an indicator, display alarm information on the panel�s LCD, sound the piezo sounder at the FACP, activate the FACP alarm relay and operate an optional module used to notify a remote station or initiate an auxiliary control function. The MRP-2001E offers the same features as the MRP-2001 but allows connection to 240 VAC. Unless otherwise specified, the information in this data sheet applies to both the 120 VAC and 240 VAC versions of the panels.		Fire-Lite Alarms FPJF Remote Phone Jack for ACCFFT


FireLite 30-2021-24 Firelite Flame Detector Ultraviolet 24VDC Our Price: $1,704.13		FireLite 30-2056B Flame Detector Pyrotector Explosion-proof Our Price: $3,929.93

The Pyrotector Model 30-2021-24 and Model 30-2021E-24 Ultraviolet (UV) Flame Detectors are highly sensitive to the ultraviolet radiation given off by all types of flames, including those produced by flammable liquids and gases. Since the detector does not respond to normal ambient light conditions such as sunlight, incandescent or fluorescent lighting, it is ideally suited for use as a flame detector in a variety of areas. The Pyrotector Ultraviolet Flame Detector is a compact unitized package consisting of a detection tube, encapsulated solid state electronic circuitry, and a dry-contact Form-C (SPDT) alarm relay. In the event of an alarm, the relay latches on and an alarm light is illuminated for easy identification of the unit in the alarm state. The relay is reset by momentarily interrupting power to the unit. A three-second time delay is built in to minimize false alarms cause by the presence of sparks, lightning, etc. Model 30-2021-24 is contained in a general purpose enclosure and is intended for indoor use only. It mounts on a standard 4" (10.16 cm) octagonal electrical junction box (not included). Model 30-2021E-24 is intended for indoor use and is contained in an explosion-proof enclosure that meets all requirements for NEC Class I Groups C and D; Class II Groups E, F, and G; and Class III hazardous locations. Both models operate on 24 VDC. Specifications: Operating voltage: 22 to 27 VDC for 24 VDC unit. Operating current: STANDBY: 12 mA maximum @ 24 VDC. ALARM: 100 mA@ 24 VDC. Alarm relay contact rating: 1 A @ 26 VDC. Spectral sensitivity range: 1700 to 2900 angstroms, with peak response at 2100 angstroms. Temperature range: -13�F (-25�C) to +140�F (+65�C). Humidity range: up to 90% RH. Enclosure type: general-purpose painted steel with protective cage and totally encapsulated electronics. Dimensions: 4.09" (10.389 cm) diameter; 3" (7.62 cm)deep. Weight: 0.75 lb. (0.34 kg).		The Pyrotector Model 30-2056B IR Flame Detector is a compact, unitized package containing an IR detection cell, solid state electronics and dry Form-C (SPDT) contacts for alarm and fault conditions. The detector is engineered to respond to the nominal 4.45 micron band of infrared radiation, which is commonly known as the CO2 spike. A characteristic of burning hydrocarbons is the emission of unusually high levels of IR radiation in this narrow portion of the radiation spectrum. On the other hand, extraneous light sources that are capable of triggering an alarm in other types of fire detectors emit very low levels of radiation in this range. By concentrating on this narrow band of the spectral range that is highly specific to burning hydrocarbons, combined with the use of optical filters to discriminate against most extraneous background radiation from a variety of sources, including hot objects, the Model 30-2056B is able to provide a high level of reliable fire detection, while being relatively immune to false alarm signals.The detector is compatible with most 24-volt filtered DC four wire fire alarm control panels.


FireLite 302-194 Rate Heat Detector 194-Degree Vertical Mounting Our Price: $28.59		FireLite 302-AW-135 All Weather 135 Degree Fahrenheit Rate Heat Detector Vertical Mounting Threads Our Price: $29.53

The 302 Series rate-anticipation heat detector respond and activate the fire alarm immediately whenever the ambient temperature reaches the preset temperature setting. Under rapid heat rise conditions, the rate-anticipation feature enables the detector to respond one to three degrees ahead of the setting. At the same time, however, it does not respond to momentary temperature fluctuations below the selected protection level, thus eliminating false alarms. When temperature drops back down below the protection level, the detector automatically resets itself. Application Information: 302 Series detectors have a smooth-ceiling UL rating of 50' x 50' (15.24 x 15.24 meters) and are the only type of heat detectors having such a rating on both fixed temperature and rate anticipation. The 302-H is designed for horizontal mounting and UL rated for 40' x 40' (12.19 x 12.19 meters). Dimensions: Total Overall Length: 4-1/8" Base diameter: 2" Electrical Ratings: Voltage(6-125VAC): Current(5 amps) Voltage(6-24VDC): Current(1 amp) Voltage(125VDC): Current(0.5 amp)		The 302 Series rate-anticipation heat detector respond and activate the fire alarm immediately whenever the ambient temperature reaches the preset temperature setting. Under rapid heat rise conditions, the rate-anticipation feature enables the detector to respond one to three� ahead of the setting. At the same time, however, it does not respond to momentary temperature fluctuations below the selected protection level, thus eliminating false alarms. When temperature drops back down below the protection level, the detector automatically resets itself. Specifications: Dimensions: Total overall length: 4-1/8" (10.48 cm) Base diameter: 2" (5.08 cm) Electrical Rating: -Voltage: 6-125 VAC -Current: 5 amps -Voltage: 6-24 VDC -Current: 1 amp -Voltage: 125 VDC -Current: 0.5 amp


FireLite 302-AW-194 All Weather 194 Degree Fahrenheit Rate Heat Detector Our Price: $29.53		FireLite 302-EPM-135 Rate-Anticipation Heat Detector 135-Degree (F) Explosion-Proof Mounting Our Price: $60.27

The 302 Series rate-anticipation heat detector respond and activate the fire alarm immediately whenever the ambient temperature reaches the preset temperature setting. Under rapid heat rise conditions, the rate-anticipation feature enables the detector to respond one to three degrees ahead of the setting. At the same time, however, it does not respond to momentary temperature fluctuations below the selected protection level, thus eliminating false alarms. When temperature drops back down below the protection level, the detector automatically resets itself. Application Information: 302 Series detectors have a smooth-ceiling UL rating of 50' x 50' (15.24 x 15.24 meters) and are the only type of heat detectors having such a rating on both fixed temperature and rate anticipation. The 302-H is designed for horizontal mounting and UL rated for 40' x 40' (12.19 x 12.19 meters). Specifications: Dimensions: Total overall length: 4-1/8" (10.48 cm) Base diameter: 2" (5.08 cm) Electrical Rating: -Voltage: 6-125 VAC -Current: 5 amps -Voltage: 6-24 VDC -Current: 1 amp -Voltage: 125 VDC -Current: 0.5 amp		The 302 Series rate-anticipation heat detector respond and activate the fire alarm immediately whenever the ambient temperature reaches the preset temperature setting. Under rapid heat rise conditions, the rate-anticipation feature enables the detector to respond one to three degrees ahead of the setting. At the same time, however, it does not respond to momentary temperature fluctuations below the selected protection level, thus eliminating false alarms. When temperature drops back down below the protection level, the detector automatically resets itself. 302 Series detectors have a smooth-ceiling UL rating of 50' x 50' (15.24 x 15.24 meters) and are the only type of heat detectors having such a rating on both fixed temperature and rate anticipation. The 302-H is designed for horizontal mounting and UL rated for 40' x 40' (12.19 x 12.19 meters). Specifications: Product Type: Temperature Sensor Temperature Range: 135�F (57.2�C) Dimensions: 105.0 mm Length


FireLite 302-EPM-194 194-Degree (F) Rate-Anticipation Heat Detector Explosion-Proof Mounting Our Price: $58.31		FireLite 302-ET-194 Rate Heat Detector 194D All Weather Vertical Mounting Our Price: $29.53

The Thermotech 302 Series rate-anticipation heat detectors operate within a controlled range of two to three degrees of their set points, regardless of the speed or rate of temperature rise. These detectors are available in either 135�F (57.2�C) or 194�F (90�C) ratings. The 302 Series are normally-open devices designed especially for fire detection and alarm systems. Specifications: Total overall length: 4-1/8" (10.48 cm) Base diameter: 2" (5.08 cm) Temperature Range: 194�F (90�C) Product Type: Temperature Sensor		The Thermotech 302 Series rate-anticipation heat detectors operate within a controlled range of two to three degree of their set points, regardless of the speed or rate of temperature rise. These detectors are available in either 135�F (57.2�C) or 194�F (90�C) ratings. The 302 Series are normally-open devices designed especially for fire detection and alarm systems. Specifications: Dimensions: Total overall length: 4-1/8" (10.48 cm) Base diameter: 2" (5.08 cm) Electrical Rating: -Voltage: 6 - 125 VDC -Current: 5 amps -Voltage: 6 - 25 VDC -Current: 1 amp -Voltage: 125 VDC -Current: 0.5 amp Listings and Approvals: UL Listed: S539 (302-AW-135/-194; 302-ET-135/-194; 302-135-194) FM Approved: (302-AW-135/-194; 302-ET-135/-194; 302-135/-194) CSFM: 7270-0021:001


FireLite 303003 Optical Smoke Detector 24 VDC Explosion-Proof Our Price: $4,938.50		FireLite 411RK Relay Kit for 411 Our Price: $17.39

The Pyrotector Model 30-3003 Explosion Proof Smoke Detector is a sensitive yet rugged protection device that is designed for use in hazardous industrial and commercial locations. The detector is designed to operate effectively with both slow smoldering and fast burning fires. The photoelectric smoke detector uses a solid-state infraredemitting diode (IRED) and a light-sensing photovoltaic cell arranged in a labyrinth assembly. The labyrinth permits free access to smoke but restricts external light. Because of its critical function to the operation of the detector, each IRED is selected with extreme care and is subjected to rigorous preproduction testing to ensure long-term reliability and performance. During normal operation (no smoke), the detector samples the air approximately every four seconds for a period of less than one millisecond. The photovoltaic smoke cell, which is placed at an angle to the pulsed invisible light source, is sensitive to the infrared light in the specified frequency emitted by the IRED light source and is designed to receive a signal only when the pulsed IRED source is activated. See "Cross Section of Sensing Chamber Assembly" at top of opposite column. When smoke enters the chamber, the light from the IRED reflects off the smoke particles and reaches the photovoltaic smoke cell. When the amount of light reflected by smoke reaches the factory-set threshold level, the smoke alarm circuit is actuated. The detector will respond to a slow smoldering fire when smoke in the chamber reaches the preset sensitivity setting, typically 2.3%. If a fast-burning fire should occur, including fires in flammable liquids and other materials such as plastics that generate black smoke, the abnormally rapid movement of smoke into the detection chamber is sensed by a special rate-compensating circuit. An increase in smoke within the detection chamber that exceeds a preset rate causes the rate-compensation circuit to increase the intensity of the light source, which increases detector sensitivity. If the smoke continues to build at this rate, an amplifier circuit is triggered and the unit generates an alarm. If not, the detector reverts to normal sensitivity. In normally smoky atmospheres, the detector will not go into alarm as long as the concentration is less than the fixed sensitivity of the detector. This results in a sensitive and positive response with a very low potential for unwanted alarms. The main enclosure of the detector contains the electronic circuitry, alarm relay, and supervision relay. Fail-safe Operation. To ensure reliable operation, the Model 30-3003 is equipped with self-checking circuitry. A regulation photodiode, which is matched to the smoke detection circuit, continuously monitors the output intensity of the IRED and adjusts it as necessary to compensate for an accumulation of dust or other contaminants, or any other variation that can occur with temperature and time. A power supervision relay in the detector provides a trouble output signal in the event of an input power failure. The detector uses extensive filtering against RF and transient interference. In addition, there is a two-second time delay before an alarm is generated. The printed circuit board inside the detector is coated to minimize the possibility of problems caused by moisture accumulation. Detector Outputs. The detector provides a set of Form A (SPST) N.O. contacts for connection to the alarm output circuitry and a set of SPST N.C. contacts for supervision of input. Specifications: Operating Voltage: 20 to 28 volts DC. Operating Current: Standby: 10 milliamperes. Alarm: 35 milliamperes. Temperature Range: -13�F to +140�F (-25�C to +60�C). Alarm and Supervisory Relay Contact Rating: 1.0 ampere at 30 vdc. SPST. Auxiliary Alarm Relay Contact Rating: 2.0 amperes at 30 vdc. Form C. SPDT. Dimensions: Diameter: 5-5/16". Depth: 3-1/2". Junction Box: Body Material: Copper-free aluminum, Cover: Feraloy Conduit Fitting: 25 mm (female) Engineering Specifications: The detector shall be a 2.3% fixed sensitivity photoelectric smoke detector, providing minimum response time to all fire types. The detection chamber shall extend beyond the main housing into the area to be protected, to provide maximum smoke entry capability into the chamber from any direction. The detector light source shall be an IRED (Infrared Emitting Diode). Typical detector current consumption in the standby condition shall be 10 milliamperes. The detector shall lock in on alarm and have a visible alarm indicator LED. The detector shall have SPST alarm relay contacts for connection to the fire alarm control panel and also power supervision contacts. The detector enclosure shall be an explosion-proof flanged housing designed to meet CSA certification for use in Class 1, Division 2, Groups A, B, C and D hazardous locations. The detector shall be intended for surface mounting and connection to the system wiring shall be within a rated enclosure (furnished).		Optional dry auxiliary Form-C relays, with contacts rated for 2.0 A @ 30 VDC (resistive) or 0.5 A @ 30 (resistive).Optional use requires two relays.

FireLite Alarms by Honeywell