Home > Shop Brands > GE Security >

  GE Security GEC-110071001 16 Channel Digital Output 16 Transistor Switches .04 Ampere @ 24 Volt DC MAX

GE Security GEC-110071001 16 Channel Digital Output 16 Transistor Switches .04 Ampere @ 24 Volt DC MAX


Our Price : $416.02

Product Code: GEC-110071001


The Micro/5 20 DI (Digital Input), 16 DO (Digital Output) and 16 DOR (Digital Output with Relays) option cards provide a cost-effective and convenient interface between the GE access control system and its input and ouput devices.

Micro/5 Options plug into the Micro/5 backplane. Each option has pluggable edge connectors which make field installation and maintenance quick and easy.

Micro/5-PX and Micro/5-PXN:

A maximum of four 20 DI, either four 16 DO or four 16 DOR options can be configured into the available Micro/5-PX, or -PXN card slots.  These input and output points are in addition to those provided on the 2RP, 2SRP and 8RP reader processors.

Supervised DI Points:

The 20 DI option has full four-state supervision on all digital input points, providing the means to remotely sense line condition.  Supervised states are closed, open, line short and line open.


System input and output devices can be located up to 300 m from the related microcontroller.  This reduces installation costs, as microcontrollers do not have to be near the monitoring device.

Flexible DO Devices:

The 16 DO and 16 DOR options make it possible to incorporate a complete range of output devices into an access control system.  The 16 DO may be used to drive low current or isolated devices or to drive low current devices directly.  Alternatively, an external relay may be used for higher current devices.  The 16 DOR includes integral relays, each of which can switch up to two amps at 40 VDC. Each card uses auto-reset fuses to protect the electronics from short circuits that may occur during installation.



- DI point supervision resistors should be installed as close as possible to the point being supervised
- 16 DO has 16 transistor switches, each able to switch .04A @ 24 VDC
- 16 DOR has 16 2A @ 40 VDC/30 VAC relays on board
- 20 DI and 16 DO wiring, 22 AWG shielded, stranded recommended
- 16 DOR wiring, 12 to 22 AWG shielded, stranded recommended
  • Compatible with all Micro/5 & M3000 microcontrollers
  • Options plug into the backplane for quick installation
  • Screw-terminal connectors eliminate field wiring problems

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > GE Security

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please