Home > Shop Brands > GE Security >

  GE Security GEC-430139001 Model 1010 Dual Tech Proximity Magstripe Reader

GE Security GEC-430139001 Model 1010 Dual Tech Proximity Magstripe Reader


 

Our Price : $741.07


Product Code: GEC-430139001

Qty:

Description
 
The 430139001 from GE Security is a the Dual Tech reader combines proximity reader technology and magstripe reader technology. The Model 1000 and 1010 readers are identical in their functionality, except that the Model 1010 includes an integrated keypad used for the entry of a personal identification number PIN). There have been five editions of the GE model 1000/1010 Dual Tech (Prox/Magstripe) reader. The version of the reader can be identified by the number of stripes on the face-plate of the reader.

Specifications:

Model: 430139001
Certifications: FCC Part 15, CE
Color: Gray
Communications: F/2F supervised
Credential Reading Type: Contactless, Swipe
Current Consumption[Nominal]: 250.0 mA
Height[Nominal]: 4.75 in
Length[Nominal]: 1.63 in
Operating Temperature[Minimum]: 41.0 °F
Operating Temperature[Maximum]: 150.0 °F
Power Requirements: 12 volts DC at 200 mA, 48 volts DC at 70mA
Protection Class: IP 34
Width[Nominal]: 6.0 in
Features
  • Reads ProxLite, ISO ProxLite, and EntreeŽ proximity badges and ProxLite keytags.
  • Reads ABA track 2 formatted magnetic stripe cards of up to 20 numeric digits. When used with the Micro/2 or Micro/4, only the first 12 digits are used.
  • Power-on self test.
  • "Hot swap" support allowing a reader to be connected or disconnected without powering down the micro.
  • Built-in tamper switch for detecting cover or off- the-wall tamper conditions.
  • Switch-selectable supervised or unsupervised micro communication.
  • Switch-selectable door status and exit request (REX) switch supervision.
  • Switch-selectable 40-bit Wiegand 4001 or 4002 format output.
  • Switch-selectable 12-digit or IBM 10-digit badge ID output.
  • A door strike relay for AC or DC operation, jumper-selectable normally open or normally closed contacts.
  • A keypad (Model 1010) for personal identification number (PIN) entry.
  • Weather resistant for outdoor use. See "Install the Reader" on page 7.
  • Rugged polycarbonate housing.
  • 12 to 48 VDC operation.
  • LED and beeper user interface.
  • Compatible replacement for the IBM Model 5029 reader.


Browse for more products in the same category as this item:

Shop Brands > GE Security