Home > Shop Brands > GE Security >

  GE Security GEC-6198N Non-Incendive PIR Motion Sensor White

GE Security GEC-6198N Non-Incendive PIR Motion Sensor White


 

Our Price : $934.95


Product Code: GEC-6198N

Qty:

Description
 
Interlogix's 6198 Non-Incendive PIR consists of an encapsulated, selfcontained PIR (without barrier box) for use in non-incendive applications.

Both the 6197 and 6198 utilize a dual pyroelectric sensor with jumper selectable one- or two-zone detection. These also feature a sequence processor that combines bi-directional pulse counting and Motion Verification. An opaque, high resolution Fresnel lens focuses the infrared energy on the pyroelectric sensor while blocking stray or reflected light. The unit includes three lenses: standard, vertical barrier, and long range. The PIR is housed in a cast metal housing designed to mount flat on a wall. The case, as well as the mounting screws are gasketed for water resistant rating.

The 6197 utilizes Factory Mutual and UL Listed barriers provided in the Barrier Box that limit voltage and current on the PIR wiring to intrinsically safe levels. The switching module inside the Barrier Box provides protected relay contacts for alarm and tamper loops for connection to the alarm panel. The Barrier Box includes a NEMA-4 rated steel box with a lid.

Specifications:

Voltage: 7 to 16 V DC
Current: 8 mA typical, 10 mA max.
Max. loop rating: 16 V DC, 50 mA max.
Alarm output: Fail safe contacts w/10 Ohms in series, Form A, SPST
Alarm duration: 2 to 5 seconds
Cover Tamper Contacts: Normally closed, rating: 50 mA, 12 V DC

Environmental

PIR
Operating temperature: -40F to 120F (-40C to +50C), Dust proof, water resistant
RF Immunity: Greater than 10 V meter from 1 to 1000MHz Static/lightning immunity, 2.5 kV, 2 joules max. energy. impulse, 1 msec rise / 50 msec decay
Operating temperature -4F to 140F (-20C to +60C)Dust proof, water proof if sealed fittings used
Features
  • Cast metal housing for rugged industrial or outdoor installations
  • Water resistant and dust proof
  • Operates to -40F (-40C)
  • Includes separate swivel bracket for flexible mounting
  • The 6197 is UL and FM-approved for use in: Class I, Division 1, Groups A,B,C,D; Class II, Division 1, Groups E,F,G; Class III, Division 1, hazardous locations
  • The 6198 is FM approved for Class I, Division 2, Groups A,B,C,D non-incendive applications
  • Cast metal PIR, both water resistant and dust proof
  • Advanced signal processing for superior intruder detection
  • Includes three coverage patterns in the box

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > GE Security
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please