GE Security GEC-701U ESL 701U 6-Inch Base for 711U

Home > Shop Brands > GE Security >

Our Price : $7.64

Product Code: GEC-701U

Qty:

Description

The GE photoelectric smoke detector is an interchangable head and base detector with a light-scattering optical sensor that provides outstanding stability and excellent response to a wide range of fires. A pulsed infrared LED light source and a high-speed photodiode sensing element are housed in an omnidirectional sensing chamber which is protected by an insect screen. The chamber is not affected by ambient light. For easy cleaning, the detector features a field-re-placeable optical chamber. GE 701U smoke detector is the industry's first conventional self-diagnostic detectors specifically designed for the demands of commercial and industrial environments. If the detector drifts out of its UL Listed sensitivity range or fails internal diagnostics, the alarm LED flashes once a second to indicate trouble. This meets NFPA 72 field sensitivity testing requirements without the need for external meters. Additional diagnostic information is activated by applying a magnet near the detector's integral reed switch. This initiates a self-diagnostic routine and provides visual indication of sensitivity level, or if service is required. The magnet test causes the LED to blink. The number of blink counts corresponds to a smoke detector sensitivity range. And, if they become dirty over time, the 701U detector automatically adjust the alarm threshold through built-in drift compensation.

Specifications:

Model: 701U
Voltage: 8.5 - 33VDC, non polarity sensitive
Maximum ripple (peak to peak): 10% (Vp - p)
Typical standby current (24V): 70?A
Typical alarm current (24V): up to 60 mA max, if not limited by control panel
Relay contacts: 2A @ 30VDC, 1A @ 120 VAC
Photoelectric Sensitivity: 2.85%, + 0.37, - 1.00%
Operating temperature: 32°F to 120°F (0°C to 49°C)
Operating humidity range: 0 to 95% Non-condensing
RFI immunity: 20 V/m min; 0-1000 MHz
Remote LED output current: 5 mA min, 8.5 mA max
Drift compensation adjustment: 1.0%/ft. max
Heat Sensor Ratings: Fixed 135°F/ Rate of rise 15°
Maximum wind velocity: 300 ft/min or
Field wiring size: 12-24 AWG
Remote test input: 100 ohm max
Reset voltage: 2.5V max
Reset time: 1 second max
Color: White head and base
Detector head dimensions: 4" D x 1.75" (4.44 cm) H
Detector packaging: 10 detectors per carton
Base packaging: 10 bases per carton
Base dimensions: 701U: 6" D, 0.6" x 1.3 cm) H
Total height, (head and base): 1.98" (5 cm) H