Home > Shop Brands > GE Security >

  GE Security GEC-805173NXT Simon XT Saw Package A5 without X10

GE Security GEC-805173NXT Simon XT Saw Package A5 without X10


 

Our Price : $276.63


Product Code: GEC-805173NXT

Qty:

Description
 
Simon XT is a cost-effective security system that offers up to 40 zones of burglary and fire protection, and which complies with SIA False Alarm Standards. With a built-in display touchpad and a status speaker that provides visual and voice messages for feedback, Simon XT is well suited for houses, apartments, and condominiums.

The Simon XT panel comes standard with 40 wireless zones, or it can be set up with 38 wireless zones and two built-in hardwired supervised burglary zones (normally-closed loop only). The built-in radio receiver works with both crystal and SAW LearnMode sensors.

Simon XT supports off-premises telephone control to arm and disarm the system, check system status, activate no-entry delay, or activate the latchkey feature. With latchkey capabilities, the panel can be programmed to notify customers if the system has not been disarmed at a scheduled time.

Simon XT supports convenient system operation from anywhere within the premises with the use of wireless touchpads. Choose from the Remote Handheld Touchpad, two-, four-, or five-button crystal or SAW Keychain Touchpads (keyfobs), or two-button ELM Keychain Touchpad. ELM (encrypted LearnMode) technology secures every keychain touchpad transmission. When powered by the optional line carrier transformer, adding X10-based modules lets customers control lights, appliances, and other devices.

Simon XT can send messages to a central monitoring station using SIA or Contact ID (CID) formats. The panel can also report alarms to another land-line phone location or cell phone using Voice Event Notification. Built-in two-way voice capability with VOX (voice-activated switching) provides additional security and emergency contact with the control monitoring station.

Specifications:

Electrical:

Required transformer: Class II, 9 VAC,3.34A, 60 Hz (60-899, 60-899-CN in Canada)
Fuse: Non-replaceable transformer fuse
Backup batteries: 6 VDC, 1.2 Ah lead acid(60-914)
Backup time: 24 hours (fully charged)
Battery test: 10 seconds under load every 4 hours

Radio receiver

Type: SAW-controlled superheterodyne
Frequency: 319.5 MHz/ Bandwidth 350 kHz
Sensitivity: -110 dBm nominal
Nom. range without GSM module present: 1000-ft. open-air receiving range
Nom. range with GSM module present: approx. 500-ft. open-air receiving range

Telephone/modem

Dialing: DTMF or pulse
Modem: Modified Bell 103 (110 or 300 bps)
Telephone interface: Line seizure relay

Inputs/outputs

Total input zones: 40 or 38 wireless and 2 hardwire (normally-closed loop only)
Auxiliary power: Unregulated 5.1 to 12 VDC; power-limited to 250 mA (maximum) @ 10 VDC
Siren output: 1 Hardwire Interior Siren (5.1 to 9 VDC)

Digitized voice

Digitization type: Continuous Variable Slope Delta (CVSD) Modulation
Playback rate: 88,200 bits/second Environmental
Operating temperature: 32 to 122F (0 to 49C)
Relative humidity: 90% max., noncondensing Physical
Color: White
Dimensions (LxWxD): 5.7 in. x 7.05 in. x 2.1 in. (144 mm x 179 mm x 53 mm)
Weight, without battery: 1.0 lb. (454 g)
Installation: Wall mount
Construction, chassis: ABS

Regulatory

FCC: Part 15, Part 68
UL: 985, 1023, 1635/ULC Listing ORDC102319-74,ULC-S545-M89
CSFM: California State Fire Marshall
CP01
Features
  • 40 wireless zones - two can be hardwired (normally-closed loop only)
  • Built-in PSTN 2-way voice capability (over GSM with optional module)
  • Supports both crystal and SAW LearnMode sensors
  • Supports repeaters
  • Supports 2-way RF products (version-specific)
  • Indoor and outdoor motion sensors
  • Chime feature for monitoring door, window, or motion activity
  • 1 master access code and 8 programmable user access codes of 3 to 6 digits
  • SIA or CID central station reporting formats and Voice Event Notification reporting via PSTN (native) and/or optional GSM and IP modules
  • Programmable No Activity and No Usage report features
  • Meets SIA False Alarm Standards
  • 100-event buffer with time-and-date stamp
  • Panel voice and beeps that can be disabled
  • Program panel with built-in touchpad or Enterprise Downloader software v3.4 or later
  • Firmware flash upgrades can be done remotely
  • Expansion options
  • Internet-based interactivity (with third-party providers)
  • Support for on-premises remote control with optional talking touchpad accessory

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > GE Security
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please