Home > Shop Brands > GE Security >

  GE Security GEC-806323N Simon 3 Starter Package A1 without X10

GE Security GEC-806323N Simon 3 Starter Package A1 without X10


Our Price : $151.56

Product Code: GEC-806323N


Simon 3 is a low-cost security panel that offers up to 24 zones of burglary and fire protection and complies with SIA False Alarm Standards. With a built-in touchpad and status speaker that provides voice messages for feedback, Simon 3 is well-suited for houses, apartments, and condominiums.

The Simon 3 panel comes standard with 24 wireless zones, or can be set up with 22 wireless zones and two built-in hardwired supervised burglary zones (normally-closed loop only). The built-in radio receiver works with both Crystal and SAW Learn Mode sensors. Use remote phone control to arm and disarm the system, check system status, activate no entry delay, or activate the latchkey feature. With latchkey capabilities, the panel can be programmed to notify customers if the system has not been disarmed at a scheduled time.

Convenient and expandable:

Add convenient system operation from anywhere within the premises with wireless touchpads. Choose from the Remote Handheld Touchpad, Dialog 2-Way RF Touchpad, 2-, 4-, or 5-Button SAW Keychain Touchpads, 2- or 4-button Crystal Keychain Touchpads, or 2-Button ELM (encrypted learn mode) Keychain Touchpad. ELM technology secures every keychain touchpad transmission. When powered by the optional line carrier transformer, adding X10® modules lets customers control lights, appliances, and other devices. The Dialog RF Electronic Thermostat provides a money-saving and convenient way to monitor and control temperatures by integrating heating and cooling features into a security system.

Enhanced monitoring:

Simon 3 can send messages to a central monitoring station using SIA or contact ID (CID) formats, or to a numeric pager carried by a designated user. The panel can also report alarms to another land-line phone location or cell phone using Voice Event Notification.



Required transformer: Class II, 9 VAC, 700 mA, 60 Hz (60-898-ITI; 22-109-CN in Canada) or Class II 9 VAC, 700 mA, 60 Hz Power Line Carrier (60-913; 22-129-CN in Canada)
Fuse: Non-replaceable transformer fuse
Backup batteries: 6 VDC, 1.2 Ah lead acid (60-914)
Backup time: 24 hurs (fully charged
Battery test: 10 seconds under load every 4 hours

Radio Receiver:

Type: AW-Controlled Superheterodyne
Frequency: 319.5 MHz/ Bandwidth 350 kHz
Sensitivity: -110 dBm nominal
Nom. range: 500 ft. (240 m) open-air receiving range


Dialing: DTMF or pulse
Modem: Modified Bell 103 (110 or 300 bps)
Telephone interface: Lines seizure relay


Total input zones: 24 or 22 wireless and 2 hardwire (normally-closed loop only)
Auxiliary power: Unregulated 5.1 to 12 VDC; power-limited to 250 mA (maximum) @ 10 VDC
Siren outputs: 1 Hardwire Interior Siren and 1 Hardwire Exterior Siren output (5.1 to 12 VDC)


Processor type: Mitsubishi M30620FCAFP / Processor Clock 16 MHz
System ROM: 32 KB / System RAM 3 KB
Memory retention: Unlimited duration (4 Mbit Flash)

Digitized Voice:

Digitization type: Continuous Variable Slope Delta (CVSD) Modulation
Playback rate: 88,200 bits/second
Vocabulary size: 212 words (approximately 90 sec.)


Operating temperature: 32 to 122°F (0 to 50°C)
Relative humidity: 90% max., noncondensing


Color: Belgian gray
Dimensions (LxWxD): 7.5 x 6.75 x 1.5 in. (191 x 171.5 x 38 mm)
Weight, without battery: 1.0 lb. (454 g)
Installation: Wall and table mount
Construction, chassis: ABS


FCC: Part 15, Part 68
UL: 985, 1023, 1635/ULC Listing ORD-C1023-19074, ULC-S545-M89
CSFM: California State Fire Marshall
  • 24 wireless zones– two can be hardwire (normally-closed loop only)
  • Supports both Crystal and SAW Learn Mode sensors
  • Supports repeaters
  • Supports Dialog 2-Way RF products
  • Indoor and outdoor motion sensors
  • Chime feature for monitoring door, window, or motion activity
  • 1 master access code and 5 programmable user access codes of 3 to 6 digits
  • SIA or CID central station reporting formats and Voice Event Notification reporting
  • Program No Activity and No Usage Report features
  • Built-in 2-way voice with VOX (model 60-875-11-3 only)
  • Meets SIA False Alarm Standards
  • 100-event buffer with time and date stamp
  • Disable panel voice and beeps
  • Program panel with built-in touchpad or ToolBox software
  • Optional table-mounting base

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > GE Security

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please