 |
 |
 |
|
The GE Security 80-632-3N-XT - GE SIMON XT WIRELESS Security System manufactured by GE Security is designed to meet or exceed the original 80-632-3N-XT - GE SIMON XT WIRELESS Security System in quality, durability, and performance. Simon XT is a cost-effective security system that offers up to 40 zones of burglary and fire protection, and which complies with SIA False Alarm Standards. With a built-in display touchpad and a status speaker that provides visual and voice messages for feedback, Simon XT is well suited for houses, apartments, and condominiums.
Specifications:
Electrical:
Required Transformer: Class II, 9 VAC, 3.34A, 60 Hz (60-899, 60-899-CN in Canada)
Fuse: Non-replaceable transformer fuse
Backup Batteries: 6 VDC, 1.2 Ah lead acid (60-914)
Backup Time: 24 hours (fully charged)
Battery Test: 10 seconds under load every 4 hours
Radio Receiver:
Type: SAW-controlled superheterodyne
Frequency: 319.5 MHz/ Bandwidth 350 kHz
Sensitivity: -110 dBm nominal
Nom. range without GSM module present: 1000-ft. open-air receiving range
Nom. range with GSM module present: approx. 500-ft. open-air receiving range
Telephone/Modem:
Dialing: DTMF or pulse
Modem: Modified Bell 103 (110 or 300 bps)
Telephone Interface: Line seizure relay Inputs/outputs
Inputs/Outputs:
Total Input Zones 40 or 38 wireless and 2 hardwire (normally-closed loop only)
Auxiliary Power: Unregulated 5.1 to 12 VDC; power-limited to 250 mA (maximum) @ 10 VDC
Siren Output: 1 Hardwire Interior Siren (5.1 to 9 VDC)
Digitized Voice:
Digitization Type: Continuous Variable Slope Delta (CVSD) Modulation
Playback Rate
88,200 bits/second
Environmental:
Operating Temperature 32 to 122° F (0 to 49° C)
Relative Humidity 90% max., noncondensing
Physical:
Color: White
Dimensions: (LxWxD) 5.7 in. x 7.05 in. x 2.1 in. (144 mm x 179 mm x 53 mm)
Weight, without battery: 1.0 lb. (454 g)
Installation: Wall mount
Construction, chassis: ABS
Regulatory:
FCC: Part 15, Part 68
UL: 985, 1023, 1635/ULC Listing ORDC102319-74,ULC-S545-M89
CSFM: California State Fire Marshall
CP01
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 40 wireless zones - two can be hardwire (normally-closed loop only)
- Supports Crystal and SAW Learn Mode sensors
- Supports repeaters
- Supports two-way RF products (version specific)
- Indoor and outdoor motion sensors
- Chime feature for monitoring door, window, or motion activity
- 1 master access code and 8 programmable user access codes of 3 to 6 digits
- SIA or CID central station reporting formats and Voice Event Notification reporting via PSTN (native) and/or GSM, IP (with optional modules)
- Programmable No Activity and No Usage report features
- Built-in 2-way voice
- Meets SIA False Alarm Standards
- 100-event buffer with time and date stamp
- Panel voice and beeps that can be disabled
- Program panel with built-in touchpad or Enterprise Downloader software v3.4 or later
- Firmware flash upgrades can be done remotely
- Expansion options
- Internet based interactivity (with Alarm.com GSM module & service)
- Support for on-premise remote control with optional talking touchpad accessory
|
|
|
|
|
|
|
|
|
