 |
 |
 |
 |
Simon XT is a cost-effective security system that offers up to 40 zones of burglary and fire protection, and which complies with SIA False Alarm Standards. With a built-in display touchpad and a status speaker that provides visual and voice messages for feedback, Simon XT is well suited for houses, apartments, and condominiums. Optional GSM reporting and alarm.com features support off-premises telephone control to arm and disarm the system, check system status, activate no-entry delay, or activate the latchkey feature. The Simon XT panel comes standard with 40 wireless zones, or it can be set up with 38 wireless zones and two built-in hardwired supervised burglary zones (normally-closed loop only).
The built-in radio receiver works with both crystal and SAW LearnMode sensors. Simon XT supports convenient system operation from anywhere within the premises with the use of wireless Two-Way Talking Touch Screens and/or touchpads. Choose from the Remote Handheld Touchpad, two-, four-, or five-button crystal or SAW Keychain Touchpads (keyfobs), or two-button ELM Keychain Touchpad. When powered by the optional line carrier transformer, adding X10-based modules lets customers control lights, appliances, and other devices. Simon XT can send messages to a central monitoring station using SIA or Contact ID (CID) formats. The panel can also report alarms to another land-line phone location or cell phone using Voice Event Notification. Built-in two-way voice capability with VOX (VoiceActivated Switching) provides additional security and emergency contact with the control monitoring station.
Specifications:
Electrical:
Required transformer: Class II, 9 VAC, 3.34A, 60 Hz (60-899, 60-899-CN in Canada) Fuse: Non-replaceable transformer fuse Backup batteries: 6 VDC, 1.2 Ah lead acid (60-914) Backup time: 24 hours (fully charged) Battery test: 10 seconds under load every 4 hours
Radio receiver
Type: SAW-controlled superheterodyne Frequency: 319.5 MHz/ Bandwidth 350 kHz Sensitivity: 110 dBm nominal Nom. range without GSM module present: 1000-ft. open-air receiving range Nom. range with GSM module present: approx. 500-ft. open-air receiving range
Telephone/modem
Dialing: DTMF or pulse Modem: Modified Bell 103 (110 or 300 bps) Telephone interface: Line seizure relay
Inputs/outputs
Total input zones: 40 or 38 wireless and 2 hardwire (normally-closed loop only) Auxiliary power: Unregulated 5.1 to 12 VDC; power-limited to 250 mA (maximum) @ 10 VDC Siren output: 1 Hardwire Interior Siren (5.1 to 9 VDC)
Digitized voice
Digitization type: Continuous Variable Slope Delta (CVSD) Modulation Playback rate: 88,200 bits/second
Environmental
Operating temperature: 32 to 122°F (0 to 49°C) Relative humidity: 90% max., non-condensing
Physical
Color: White Dimensions (LxWxD): 5.7 x 7.05 x 2.1 in. (144 x 179 x 53 mm) Weight, without battery: 1.0 lb. (454 g) Installation: Wall mount Construction, chassis: ABS
Physical
FCC: Part 15, Part 68 UL: 985, 1023, 1635/ULC Listing ORD-C102319-74,ULC-S545-M89 CSFM: California State Fire Marshall CP01
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- 40 wireless zones - two can be hardwired (normally-closed loop only)
- Built-in PSTN 2-way voice capability (over GSM with optional module)
- Supports both crystal and SAW LearnMode sensors
- Supports repeaters
- Supports 2-way RF products (version-specific)
- Indoor and outdoor motion sensors
- Chime feature for monitoring door, window, or motion activity
- 1 master access code and 8 programmable user access codes of 3 to 6 digits
- SIA or CID central station reporting formats and Voice Event Notification reporting via PSTN (native) and/or optional GSM and IP modules
- Programmable No Activity and No Usage report features
- Meets SIA False Alarm Standards
- 100-event buffer with time-and-date stamp
- Panel voice and beeps that can be disabled
- Program panel with built-in touchpad or Enterprise Downloader software v3.4 or later
- Firmware flash upgrades can be done remotely
- Expansion options
- – Internet-based interactivity (with third-party providers)
- – Support for on-premises remote control with optional talking touchpad accessory
|
|
 |
 |
 |
 |
|
 |

|