Home > Shop Brands > GE Security >

  GE Security GEC-AB4GSB Surface Box for Signature Sounder Base

GE Security GEC-AB4GSB Surface Box for Signature Sounder Base


 

Our Price : $9.78


Product Code: GEC-AB4GSB

Qty:

Description
 
The Signature Series AB4G sounder base adds an audible output function to any Signature Series detector. The base can operate as an independent local alarm, or as part of a zone or system alarm with synchronized audible output. The sounder base matches the finish of Signature Series detectors and the sound output slots complement the smoke/heat entry openings of the detector. The result is a compact unit with an attractive appearance.

The base generates a loud piercing tone that has excellent wall penetration qualities. It uses the same tone generator found in the award-winning Genesis line of wall and ceiling horns. The AB4G may be configured in the field for either steady or temporal output and either high or low dB output. Low dB and steady output selections are made by cutting jumpers on the circuit board. The default setting is high dB with temporal output.

AB4G sounder bases on the same circuit may be activated as a group or zone with the use of a SIGA-CRR polarity reversal module, and the group or zone may be synchronized audible output with the use of a G1M-RM signal master. The AB4G sounder base can simply operate according to the state of its detector, or it can be configured through system programming to operate in conjuction with all sounder bases on the same circuit, or it can be controlled by program rules. Available operating modes are determined by the system that supports the Signature data loop.

Specifications:

Operating Voltage: 16-33 Vdc, 16-33 Vfwr(continuous voltage required for temporal output)
Supervisory Current: DC=1.46mA; FWR=2.15mA
Default Settings: Output volume: high dBA Output tone: temporal pattern (0.5 s on, 0.5 s off, 0.5 s on, 0.5 s off, 0.5 s on, 1.5 s off, repeat cycle).
Environmental: Operating Temperature: 32 to 120 F (0 to 49 C), Operating Humidity: 0 to 93% RH, Storage Temperature: -4 to 140 F (-20 to 60 C)
Wire Size: 12 to 18 AWG (2.5 to 0.75 mm)
Compatible Detectors: All Signature Series Detectors (SIGA-IPHS, SIGA-PHS, SIGA-IS, SIGA-PS, SIGA-HFS, SIGA-HRS)
Compatible Electrical Boxes: AB4G-SB Surface Box for Audible Bases, North American 2-1/8 in (54 mm) deep 4-inch square box, North American 4 by 4 inch octagonal ring (mud box), Standard European 100 mm square box

Dimensions:
-Base diameter: 6.8 in (173 mm).
-Base height from box: 0.8 in (21 mm)
Wall mount applications: Distance from ceiling 12 in (305 mm) maximum
Agency Listings: Meets or exceeds requirements specified in UL 268, UL 464, and ULC-S525. (MEA, CSFM pending)
Features
  • Temporal or steady tone:
  • Jumper selects steady or synchronized temporal output.
  • High or low dB output:
  • Jumper selects low or high dBA output.
  • Single or group operation:
  • Optional polarity reversing module configures base for group alarm output.
  • UL268 and UL464 listed:
  • UL listing under smoke detector and audible signal standards allows application as smoke alarm and/or audible signal.
  • Attractive installation:
  • Flush mount to a wide selection of North American boxes or surface mount to optional custom-matched box.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > GE Security
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please