 |
 |
 |
|
The CBR-16eZ is ideal for stand alone applications that require quick and easy installation and operation. Along with ease of use, the CBR-16eZ offers exceptional live monitoring and multiscreen live and playback display.
Cameras can be viewed in any of three different multiscreen formats while full resolution pictures from all cameras are sent to a recorder. Patented Parallel Video Processing (PVP) outputs up to 60/50 (NTSC/PAL) pictures per second to your monitor and delivers closer to real-time display than conventional multiplexers. VEXT automatically optimizes multiplexer/recorder synchronization and prevents loss of critical pictures regardless of record speed or how often record speeds change
Specifications:
Video:
Display memory: 2048 x 2048 memory array, 32 MB live/play plus 32 MB record = 64 MB total display memory
Colors: YUV 4:2:2, 16.8 million colors
Grayscale: 256 levels
Horizontal resolution: 720 pixels
Vertical resolution: 484 active lines (NTSC/EIA), 576 active lines (PAL/CCIR)
Sampling rate: 14.2 MHz (NTSC/EIA), 17.7 MHz (PAL/CCIR)
Alarm Handling and Video Loss:
Alarm inputs: 16 programmable NO or NC in menus
Alarm outputs: 2 form C relays, each NO and NC. Rated 0.5 A continuous, 1.0 A momentary. One relay active while an alarm is active, one active during video loss.
Alarm latching: 3 settings: latched; transparent; timed-out. Programmable 1 to 99 seconds.
Alarm recording: Automatic priority control, interleaved
Alarm displays: Automatically switch to alarmed camera
Video Motion and Activity Detection:
Zones per camera: 256, 16 x 16 grid, programmable
Gray levels per zone: 256 levels
Sensitivity settings: 10 levels with active feedback setup scope
Activity recording: Automatic priority control, interleaved
Intrusion: Link to alarms, programmable per camera
DB25 Pinouts:
Pin #: Designation
1-16: Alarm inputs, NO or NC, programmable
17, 21: Alarm out, relay #1, NO or NC, isolated
18-20: Ground
22, 25: Video loss out, relay #2, NO or NC, isolated
23: Alarm acknowledgment input, NO
24: VCR camera switch input (VEXT)
Miscellaneous:
Input voltage: 12 VDC, 90 V to 264 V; AC/DC adapter included
Power: 25 W nominal
Operating temperature: 32º to 104º F (0º to 40º C)
Relative humidity: 90 percent, noncondensing
Dimensions: 17.5 in x 14 in x 1.7 in (444 mm x 360 mm x 43 mm)
Weight: 9 lb (4 kg)
Inputs:
Camera: 16 looping, BNC connectors, NTSC/EIA or PAL/CCIR compatible
Recorder: 1 NTSC/EIA or PAL/CCIR compatible, BNC connector
Conditioning: AGC, 0.7 to 2.0 V pk-pk video accepted
Termination: Manual ON/OFF 75 ohm on rear panel, per camera
Outputs:
Monitor: 2: 1 MON-A multiscreen output, BNC connector, NTSC/EIA or PAL/CCIR compatible; 1 MON-B full screen switched, BNC connector, NTSC/EIA or PAL/CCIR compatible
VCR: 1 NTSC/EIA or PAL/CCIR compatible, BNC connector
Optional Equipment:
CBR-ALM: Optional alarm input module
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- AutoInstall with automatic camera detection, automatic color/mono detection, automatic setup of sequencing lists and record lists, automatic gain control
- PVP ultrafast monitor update speed
- VEXT automatic record speed synchronization to simplify installation
- One-touch recorder view for easy recorder setup
- Video motion detection (intrusion) and activity detection with active feedback setup scope
- Live in full-screen, sequencing, quad, 9-up, or 16-up display
- Playback in full-screen, sequencing, quad, 9-up, or 16-up display
- Covert camera feature removes selected camera(s) from display without altering recording
- One-touch "freeze"
- Electronic PTZ
- 16 alarm inputs, 2 relay outputs (one for alarms, one for video loss)
- Manually activated alarm
- Plays back tapes made by other manufacturers' multiplexers
- Password controlled access to setup menus
- Time, date, and titling display
- Battery backup of setup memory
|
|
|
|
|
|
|
|
|
