 |
 |
 |
|
The GE Security GE-DS-82 managed Ethernet port series offers eight 10/100Mbps Fast Ethernet ports with 2 Gigabit TP/SFP combo ports. The 2 Gigabit TP/SFP combo ports can be either 1000Base-T for 10/100/1000Mbps or 1000Base-SX/LX through SFP (Small Factor Pluggable) interface. These units boast a high-performance wire-speed and switch architecture capable of providing non-blocking switch fabric and throughput as high as 5.6Gbps. Its two built-in Gbe uplink ports also offer incredible extensibility, flexibility and connectivity to the core switch or servers.
Plus, with the PoE in-line power following the standard IEEE 802.3af, the GE-DS-82-PoE is able to power on eight PoE devices at distances up to 100 meters through the 4-pair Cat 5/5e UTP wire. These cost-effective managed switches not only deliver easy Web-based management, but also provide a centralized SNMP application to monitor the status of Switch and traffic per port. Key features include:
WEB/SSL/Telnet
SNMP and 4 RMON groups
802.1Q/Q-in-Q VLAN
Access Control List
Multiple Spanning Tree
802.1X Authentication/RADIUS
IGMP Snooping
802.3af PoE (GE-DS-82-PoE)
Affording your current network the opportunity to grow and expand, the GE-DS-82 series provides an advanced WEB and SNMP management interface to meet this demand. With its built-in Webbased management, the GE-DS-82 offers an easy-to-use, platformindependent management and configuration facility. These switches also support standard Simple Network Management Protocol (SNMP) and can be monitored via any standard-based management software. For efficient management via Web interface, the GE-DS-82 series can be programmed for basic switch management functions such as port speed configuration, Port Trunking, VLAN, Port Mirroring, Rapid Spanning Tree and miscellaneous configuration. Additionally, the firmware includes advanced features such as IGMP snooping, QoS (Quality of Service), broadcast storm and bandwidth control to enhance bandwidth utilization.
The GE-DS-82 series offers comprehensive Access Control List (ACL) for enforcing security to the edge. Its protection mechanisms include a port-based 802.1X user and device authentication. Moreover, the switch provides MAC filter and Static MAC for enforcing security policies to the edge. Administrators can now construct highly secured corporate networks with considerably less time and effort than before.
Specifications:
Hardware Specification:
10/100Mbps Copper Ports: 8 10/100Base-TX RJ-45, Auto-MDI/MDI-X ports
1000Mbps Copper Ports: 2 10/100/1000Mbps RJ-45, Auto-MDI/MDI-X ports
SFP/Mini-GBIC Slots: 2 1000Base-SX/LX/BX, shared with Port-9~Port-10
Switch Architecture: Store-and-Forward
Switch Fabric: 5.6Gbps/non-blocking
Switch Throughput: 4.16Mpps @ 64Bytes
Address Table: 8K entries
Share Data Buffer: 2 Mbits
Maximum Frame Size: 9K Bytes
Flow Control: Back pressure for Half-Duplex, IEEE 802.3x Pause Frame for Full-Duplex
LED: GE-DS-82 Power Link/Activity (Green), 100 (Amber), 1000 LNK / ACT (Green), 10/100 LNK / ACT (Amber), GE-DS-82-PoE Power Link/Activity (Green), PoE In-Use (Amber), 1000 LNK / ACT (Green), 10/100 LNK / ACT (Green)
Dimensions (WxDxH): 13 x 6.10 x 1.71 in., 330 x 155 x 43.5mm, 1U height
Weight: 2.8 lbs/1.27kg
Reset Button: < 5 sec.: System reboot, > 5 sec.: Factory Default
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 8-Port 10/100TX Fast Ethernet ports with IEEE 802.3af PoE injector
- 2 10/100/1000T TP combo interfaces and 2 mini-GBIC/SFP slots, shared with Port-9 and Port-10 (GE-DS-82)
- Reset button for system management
- 1 RS-232 male DB9 console interface for switch basic management and setup
- Prevents packet loss Flow Control with store-and-forward architecture and runt/CRC filtering to optimize the network bandwidth
- Broadcast/multicast/Unicast storm control
- 8K MAC address table, automatic source address learning and ageing
- Supports VLAN
- Port Mirroring to monitor the incoming or outgoing traffic on a particular port
- 4 priority queues on all switch ports
- Strict priority and Weighted Round Robin (WRR) CoS policies
- Supports QoS and In/Out bandwidth control on each port
- In/Out rate limit control on each port
- Supports IGMP Snooping v1 and v2
- IGMP Snooping v2 fast leave
- Querier mode support for multi-casting
- IEEE 802.1x port-based network access control protocol
- RADIUS users access authentication
- Layer 3 and Layer 4 Access Control List (ACL)
- Source IP-MAC/Port-Binding
- Port Security for Source MAC address entries filtering
- Switch Management Interface
- Built-in Trivial File Transfer Protocol (TFTP) client
- Firmware upgrade via TFTP or HTTP
- Configuration restore/backup via TFTP or HTTP
- Event message logging to remote Syslog server
- Complies with IEEE 802.3af Power over Ethernet End-Span PSE
- Up to 8 IEEE 802.3af devices powered
- Auto detect powered device (PD)
|
|
|
|
|
|
|
|
|
