Home > Shop Brands > GE Security >

  GE Security GEC-GEDS82POE 8-Port 10/100+2 Gigabit TP/SFP Full POE Managed Switch

GE Security GEC-GEDS82POE 8-Port 10/100+2 Gigabit TP/SFP Full POE Managed Switch


Our Price : $507.15

Product Code: GEC-GEDS82POE


The GE-DS-82-POE 8-Port Fast Ethernet Layer 2+ Managed Switch from General Electric offers eight 10/100 Mbps Fast Ethernet ports with 2 Gigabit TP/SFP combo ports. This cost-effective managed switch not only delivers easy web-based management, but also provides a centralized SNMP application to monitor the status of switch and traffic per port.

Robust Layer 2+ Features:

For efficient switch management, this switch is easily programmed for switch management functions. Via a simple yet powerful set of built-in web services, the switch can facilitate Port Speed Configuration, Port Link Aggregation, IEEE 802.1Q VLAN and Q-in-Q VLAN, Port Mirroring, Spanning Tree and ACL security. The switch includes advanced features such as Multicasting with IGMP snooping and query, QoS (Quality of Service), broadcast storm and bandwidth control to enhance bandwidth utilization. This switch supports standard Simple Network Management Protocol (SNMP) and includes an advanced SNMP feature set to monitor the status of the switch and traffic per port. The switch can also be monitored via any standards-based SNMP management software.

Engineered for Real-Time Performance:

This switch is designed with a high performance wire-speed and switch architecture capable of providing a non-blocking switch fabric with throughput as high as 5.6 Gbps. To ensure optimum quality of service, the 8-port switch classifies and prioritizes Layer 2 802.1p or Layer 3 IP TOS/ DSCP traffic into four hardware queues that support strict or Weighted Round Robin (WRR) queuing algorithms. This functionality provides maximum allocation of limited network resources and guarantees best performance for real-time applications.

Full Power, Isolated Per Port PoE:

Featuring IEEE 802.3af Power over Ethernet (PoE) operation, this switch provides optimized deployment and safe power management of edge devices such as IP Surveillance cameras, access control panels, wireless access points (WAP) and Voice over IP (VoIP). Full power PoE is provided to all 8 ports with no power sharing, and added port circuit protection isolates and prevents power interference between ports.

Advanced Security:

This switch also offers comprehensive Layer 3 and Layer 4 Access Control List (ACL) to filter out unwanted traffic, the result of protection mechanisms that comprise RADIUS and Port-Based 802.1x user and device authentication. In addition, the switch provides MAC filter, Static MAC, IP/MAC binding and Port Security for enforcing security policies to the edge. With enterprise class switches, a network administrator can now construct a highly secure network with considerably less time and effort.

High-performance Switch Architecture:

Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z standards
High performance Store and Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
Broadcast/multicast/unicast storm control
5.6 Gbps non-blocking switch fabric
9K bytes Jumbo frame support
8K MAC address table, automatic source address learning and aging

Full Multicast Support for IP Video:

IGMP Snooping v1 and v2 fast leave
IGMP Query mode support
Up to 256 multicast groups

VLAN Support:

IEEE 802.1Q Tag-Based VLAN
Up to 255 VLANs groups, out of 4041 VLAN IDs
Port-Based VLAN
Q-in-Q tunneling (Double Tag VLAN)

Spanning Tree Protocol:

STP, IEEE 802.1D (Spanning Tree Protocol)
MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol)

Quality of Service:

4 priority queues on all switch ports
Traffic classification: - IEEE 802.1p Class of Service, - IP TOS/DSCP code priority, - Port Base priority
Strict priority and weighted round robin (WRR) CoS policies
Ingress/Egress Bandwidth Control on each port

Power over Ethernet:

Complies with IEEE 802.3af Standard
180 W power budget
Auto-detects PoE powered devices (PD)
Provides full-power (15.4 W) PoE on each port - no port sharing
Circuit protection isolates and prevents power interference between ports
End-Span (PSE) configuration supplies power up to 100 m
PoE Management Features: - Total power budget control, - Per port control (enable/disable, priority, power limit), - PD classification detection, - Power Supply Over temperature Protection

Link Aggregation:

IEEE 802.3ad LACP (Link Aggregation Control Protocol)
Up to 13 Trunk groups
Up to 8 ports per trunk group with 1.6 Gbps bandwidth (Full Duplex mode)
Supports Cisco ether-Channel (Static Trunk)

Advanced Security:

IEEE 802.1x Port-based authentication
RADIUS users access authentication
Layer 3 and Layer 4 Access Control List (ACL)
MAC Filtering and Source IP/MAC address port-binding
Port Mirroring to monitor incoming or outgoing traffic on a particular port

Switch Management:

Local console or remote switch management via web browser, Telnet CLI, SNMP v1, v2c
SNMP Trap for alarm notification of events
Four RMON groups 1, 2, 3, 9 (history, statistics, alarms, and events)
Built-in Trivial File Transfer Protocol (TFTP) client
Configuration upload/download via TFTP or HTTP
Firmware upgrade via TFTP or HTTP
Supports Ping function
Reset button for system management


10/100Base-TX Ports: RJ-45 (8), GigE Combo Uplink Ports: RJ-45 (Ports 9 and 10) 10/100/1000Mbps; SFP/Mini-GBIC Slots, (Shared with Ports 9 and 10) 1000Base-SX/LX/BX
Port Configuration: Auto MDI/MDI-X, Port Speed: Auto-negotiate, Port enable/disable, Auto-negotiation, 10/100 Mbps full-and-half duplex mode selection, Flow control enable/disable
Switch Architecture: Store-and-forward
Switch Fabric: 5.6 Gbps (non-blocking)
Switch Throughput: 4.16 Mpps @ 64Bytes
MAC Address Table Size: 8K entries
Share Data Buffer: 2 Mbytes
Maximum Frame Size: 9K Bytes
Flow Control
Back pressure for Half-Duplex
IEEE 802.3x Pause Frame for Full-Duplex
Management Interface: Console, telnet, web browser, SSL, SNMPv1 and v2c and v3c
Port Status: Display each port's speed duplex mode, link status and flow control status.
Port Mirroring: TX/RX/Both; 1 to 1 monitoring
Bandwidth control: Ingress/Egress rate control: configure per 128 Kbps
PoE Standard: IEEE 802.3af
PoE Power Supply Type: End-Span (PSE)
PoE Power Budget: 180 W
Max. Number of Class 2 PD: 8
Max. Number of Class 3 PD: 8
PoE Power Output: PoE Power Output Per Port: 48 V DC, 350mA; 15.4 W max.
Power PIN Assignment: 1/2(+), 3/6(-)
Access Control List: IP-based Layer 3/Layer 4 ACL
Link Aggregation: Static Port Trunk IEEE 802.3ad LACP (Link Aggregation Protocol) Supports 13 groups of 8-port trunk, IEEE 802.3ad LACP
VLAN: IEEE 802.1q tagged-based VLAN, up to 255 VLANs groups, out of 4041 VLAN IDs Port-based VLAN. Q-in-Q tunneling GVRP for VLAN management, up to 128 dynamic VLAN entries Private VLAN Edge (PVE) protected port with two protected port groups
QoS: 4 priority queue, Traffic classification based on: Port priority, 802.1p priority, DSCP/TOS field in IP Packet
SNMP MIBs: RFC-1213 MIB-II, RFC-2863 Interface MIB, RFC-2665 EtherLike MIB, RFC-1493 Bridge MIB, RFC-2819 RMON MIB (Group 1, 2, 3,9), RFC-2737 Entity MIB, Power-Ethernet-MIB
IGMP Snooping: Multicasting/IGMP: IGMP Snooping (v1/v2), IGMP Query, Up to 256 multicast groups
LED Indicator: Power: On/Green, 10/100Base-TX/PoE Ports (8): 10/100 LNK/ACT - Green; PoE in Use - Amber; 10/100/1000Base-T/SFP Ports: 100 LNK/ACT - Amber; 1000 LNK/ACT - Green
Reset Button: System reboot: push and hold < 5 sec., Factory default: push and hold > 5 sec.
Regulation Compliance: FCC Part 15 Class A; CE; UL
Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3z 1000Base-SX/LX, IEEE 802.3ab 1000Base-T, IEEE 802.3x Flow Control and Back pressure, IEEE 802.3ad Port trunk with LACP, IEEE 802.1d Spanning Tree Protocol, IEEE 802.1s Multiple Spanning Tree Protocol, IEEE 802.1p Class of service, IEEE 802.1Q VLAN Tagging, IEEE 802.1x Port Authentication Network Control, IEEE 802.3af Power over Ethernet, RFC 768 UDP, RFC 793 TFTP, RFC 791 IP, RFC 792 ICMP, RFC 2068 HTTP, RFC 1112 IGMP version 1, RFC 2236 IGMP version 2
AC Power: Input Voltage: 100~240 VAC, 50/60 Hz, Auto-sensing
Power Consumption: Full Load Power Consumption: 200 W
Operating Temperature: 32 to 122F (0 to 50C)
Storage Temperature: -4 to 158F (-20 to 70C)
Relative Humidity: 20 to 95% non condensing
Dimensions: 13 x 6.10 x 1.71" (330 x 155 x 43.5 mm)
Weight: 3.5 lb (1.6 kg)
  • Up to 256 Multicast Groups
  • Auto-Negotiation
  • Auto-MDI/MDI-X Detection
  • 2-Uplink Gigabit TP/SFP Combo Ports
  • 1 RS-232 Male DB9 Console Port
  • Supports Full-Duplex/Half-Duplex Modes
  • 5.6 Gbps Non-Blocking Switch Fabric
  • 9K Bytes Jumbo Frame Support
  • Advanced Security

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > GE Security
Shop Brands

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please