 |
 |
 |
|
The GE-DSGH-8 is a Gigabit Ethernet Switch designed to deliver nonblocking, triple-speed performance (10/100/1000Mbps) in demanding, heavy industrial environments. A slim metal case makes the most of limited space.
16Gbps internal switching fabric, combined with 9K jumbo packet support, provides a secure platform that can handle a large volume of traffic, whether it’s at the backbone or server level. Auto-negotiation between ports allows optimal speed detection through RJ-45 cables. An auto-MDI/MDI-X function allows connection to other hubs or switches, without the need for crossover cables.
Flow-control capabilities add flexibility in network configuration, allowing integration of the devices with various switch-supported routers and servers.
Specifications:
10/100/1000Base-T Ports: 8
Installation: DIN-rail kit and wall-mount ear
Dimensions (W) x (D) x (H): 5.31" x 3.42" x 1.26", 135 x 87 x 32mm
EFT: 6KV
ESD: 6KV
Power Input: 12~48 VDC, Redundant power with polarity-reverse protection function
Power Consumption: 13.2 Watts/45BTU
Power Connector: 6-pin removable screw terminal
Switch Processing Scheme: Store-and-forward
Address Table: 8K entries
Buffer: 176 kilobytes
Flow Chart: Back pressure for half-duplex, IEEE 802.3x Pause frame for full-duplex
Switch Fabric: 16Gbps
Throughput (Packet per second): 11.9Mpps@64Bytes
Jumbo Frame: 9Kbytes
Network Cables:
10/100/1000Base-T: Cat. 3, 4, 5, 5e, 6 UTP cable (100 meters, max.), EIA/TIA-568 100-ohm STP (100 meters, max.)
Operating Temperature: -40ºC~75ºC
Operating Humidity: 5% ~ 95% (non-condensing)
Storage Temperature: -40ºC~75ºC
Storage Humidity: 5% ~ 95% (non-condensing)
Standards Compliance: IEEE 802.3 Ethernet, IEEE 802.3u Fast Ethernet, IEEE 802.3ab Gigabit Ethernet, IEEE 802.3x Full-duplex flow
Stability testing: IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration)
Network cables 10/100/1000Base-TX: Cat. 3, 4, 5, 5e, 6 UTP cable (100meters, max.), EIA/TIA-568 100-ohm STP (100meters, max.)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 8 Gigabit Ethernet 10/100/1000Base-T ports with auto-MDI/MDI-X function for each port
- IP-30 metal case for protection that allows either DIN-rail or wall mounting
- 12 to 48V DC, redundant power with polarity-reverse protection
- Support for voltage/surge-suppression devices, –VDC EFT 6000 protection for power line, –VDC ESD 6000 protection for Ethernet
- Operates between -40 to 75ºC
- Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100 Base-TX, IEEE 802.3ab 1000Base-T Ethernet standards
- Store-and-forward switching architecture, broadcast storm control and runt/CRC filtering
- Back pressure (half-duplex) and IEEE 802.3x PAUSE frame-flow control (full-duplex)
- Integrated address-lookup engine with support for 8K absolute MAC address table
- 176 kilobytes on-chip frame buffer
- 9K jumbo packet-size support
- Automatic address learning and address aging
- CSMA/CD Protocol
|
|
|
|
|
|
|
|
|
