 |
 |
 |
|
Replace traditional analog dome cameras with the CamPlus IP Rugged Dome. The latest camera sensors and data signal processing technology combine with sharp MPEG-4 compression to send images quickly and easily over the network. The robust dome housing can be installed indoors or outdoors and is available with day/night capabilities for use in a variety of lighting conditions.
The high-resolution CamPlus IP Rugged Dome camera receives Power over Ethernet (PoE) for installation with only one cable, or from a 12 VDC/24 VAC universal input to provide top-quality video in any security network.
The IP Rugged Dome uses the latest MPEG-4 compression for dual streaming high-resolution D1 images over the network. Additionally, bandwidth is easy to manage for the specific needs of each network - it’s even possible to set one stream to high bandwidth and the other low. Or stream the D1 images live to one location and stream to a recording station in a different location.
It’s simple to use web browser software for remote configuration, to view images, and to upgrade firmware. Watch live video from anywhere in the world with Internet access. Multicast support allows multiple authorized users to connect, without bogging down the network or slowing down connection to recording locations.
CamPlus IP dome cameras are compatible with industry-standard protocols like SMTP and TCP/IP for broadband connectivity. With choices for different mounting environments and lighting conditions, a CamPlus IP camera will work for virtually any application.
Specifications:
Sensor: 1/3-in. interline transfer double speed Super HAD CCD
Signal System: NTSC or PAL standard
Effective Pixels (HxV): 771 x 492 NTSC 753 x 582 PAL
Horiz. Resolution: 520 TVL
Sensitivity: 0.015 lux @ F1.4 (20 IRE, SAGC on)
Frame Integration: 1x~32x
S/N Ratio: Better than 50 dB (AGC off)
Synchronization: Line-lock
Motion Detection: Yes (3 windows)
Electronic Shutter: 1/50 ~ 1/12000 sec (NTSC), 1/60 ~ 1/12000 sec (PAL)
Auto Iris Control: DC
BLC: Auto detect on/off
Gain: 0 ~ 18 dB
White Balance: ATW
D/N Switching: Lens with I/R cut filter: auto
Alarm I/O: 1 ea., TTL, terminal block
Video:
Compression MPEG-4 ASP compliant
Picture Resolution: D1: 720 x 480 (NTSC) / 720 x 576 (PAL); CIF: 352 x 480, (NTSC) / 352 x 288 (PAL); QCIF: 160 x 112 (NTSC) /176 x 144 (PAL)
Bit Rate: 28K ~ 3 Mbps
Composite Output: 1.0 V p-p with 75 ohms loading, BNC connector
Audio:
Compression: 8 kHz, Mono, PCM
Line Input: Unbalanced, 1.4 V p-p, 1 Vrms, terminal block
Line Output: Unbalanced, 1.4 V p-p, 1 Vrms, terminal block
Network:
LAN Port: Ethernet (10/100 Base-T), RJ-45 connector
WAN Port: Ethernet (10/100 Base-T), RJ-45 connector
Protocol: TCP, UDP, IP, HTTP, DHCP, PPPoE, RTP, RTSP
Security: Password set by admin.
Environmental:
Operating Temperature: -22 to 122°F (-30 to 50°C)
Electrical:
Input Voltage 12 VDC ± 10% / PoE (IEEE 802.3af), 12 VDC ± 10% / 24 VAC ± 10%
Power Consumption: 12 W max.
Physical:
Dimensions 2.05 x 5.55 x 2.76 in., (52 x 141 x 70 mm)
Weight: 1.2 lb. (540 g)
Regulatory Certifications: FCC, CE, C-TICK, UL
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Dual streaming capabilities
- MPEG-4 compression delivers excellent picture quality
- Configuration tools to control bandwidth usage
- Power over Ethernet allows easy, one-cable installation
- Compatible with larger legacy systems
- Options available for wide range of lighting conditions
- Redundant Ethernet connections for stability
- Analog output increases set-up options
- Ability to verify events with alarm input and output
- Optional bi-directional audio
|
|
|
|
|
|
|
|
|
