Home > Shop Brands > GE Security >

  GE Security GEC-KTD128 Kalatel Ptz Receiver

GE Security GEC-KTD128 Kalatel Ptz Receiver


 

Our Price : $257.70


Product Code: GEC-KTD128

Qty:

Description
 
The KTD-128 is a compact PTZ (pan/tilt/zoom) receiver that can drive a 6 to 12 V motorized lens and a light-duty PT unit with 24 VAC motors that draw less than 1 amp. It consists of a relay card with built-in decoder circuitry and a removable terminal strip for cable connections. Both the relay card and the terminal strip plug into a mounting plate that can be fastened with screws or double-sided tape. Additionally, the KTD-128’s small size makes it ideal for use in domed camera housings.

The KTD-128 is controlled via twisted-pair cable from one or more remote Digiplex keypads. To facilitate service, relays and ICs are socketed for easy removal and replacement. Microprocessor-based circuitry enables a remote keypad or the receiver’s DIP switch to be used to program the KTD-128’s modes of operation. Programming choices include lens voltage and lens polarity. All programmed data is stored in nonvolatile memory. The KTD-128 does not include on-site control switches or auto pan capability.

Specifications:

Electrical:

Input voltage: 24 VAC, 50 to 60 Hz
Input power: 5.0 VA (externaequipment excluded)
Input maximum power: 24 VA
Input data signal: RS422
Output voltage lens: ± 6 or 12 VDC, programmable
Output voltage pan/tilt drive: 24 VAC
Output voltage camera power: 24 VAC
Relay contact rating: 2 A @ 30 VDC

Functions:

Zoom in, zoom out, focus near, focus far, iris open, iris close, pan left, pan right, tilt up, tilt down

Controls:

Site select: Multiposition DIP Switch

Connections:

Input signal, power, outputs: 13-position removable terminastrip

Mechanical:

Weight: 10.4 oz (295 g)
Mounting plate material: 0.125 in (3.2 mm) aluminum
Mounting plate finish: Black anodized
Features
  • Extra smalto fit inside most domed camera housing units
  • Drives light-duty 24 VAC PT motors
  • Easily removable PC board
  • Solid-state lens circuitry: 6 to 12 V
  • Compatible with most manufacturers’ PT units

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > GE Security
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please