Home > Shop Brands > GE Security >

  GE Security GEC-KTD463 Alarm Input Chassis Frame To 16KTD-460 Alarm Input Module Can Be Connected

GE Security GEC-KTD463 Alarm Input Chassis Frame To 16KTD-460 Alarm Input Module Can Be Connected


Our Price : $555.19

Product Code: GEC-KTD463


The KTD-463 is a desktop alarm chassis that initiates camera call-up, site annunciation, and preset camera positioning during an alarm event. It triggers these functions in response to data from the KTD-460 Alarm Input Modules, each of which can monitor the status of up to 16 dry alarm contacts or voltage sources.

The alarm input module constantly transmits information about the status level of each contact to the KTD-463. When the KTD-463 senses an alarm event, it prompts alarm functions in other Digiplex system components. These alarm events also activate the KTD-463ís output relay, which can initiate a variety of functions like starting a VCR or triggering an audible alarm.

Outstanding Features

The KTD-463 provides 16 input ports, allowing it to accommodate up to 16 KTD-460 Alarm Input Modules. The modules may be daisy-chained onto one port, or connected to multiple ports in any combination. Since each alarm input module provides connection points for up to 16 dry alarm contacts or voltage sources, the KTD-463 Alarm Chassis can monitor up to 256 alarm points. Each point may be programmed for contact sense and selectable hold delay, which keeps the alarmed site on the monitor screen for a user-defined amount of time after the alarm condition has ended.

The KTD-463 communicates with other Digiplex components via an RS422 signal over twisted-pair cable. It is supplied with optional-use, rack-mount ears for suspension in a standard, 19-inch rack. It features a liquid crystal display as well as an RS232 port for monitoring the KTD-463ís alarm activity and downloading the unitís programming setup parameters.



l Input voltage: 12 VDC
l Input power: 4.9 VA
l Input Digiplex data: RS422
l Input KTD-460 alarm: RS485
l Output Digiplex data: RS422
l Output data port: Serial RS232 (1200-9600 baud)
l Alarm output relay: 1 A @ 35 VDC


RS422 in/out and auxiliary relay data: 6-pin removable terminal strip KTD-460 modules (RS485 in/out) data: Two 16-pin removable terminal strips
Power data: 5 mm jack
Printer data: RJ-45


Weight: 2.58 lb (1.17 kg)
Construction/finish: Extruded aluminum and vinyl clad steel

Alarm Contact Programming:

Site number: Assignable, 0 to 511
Contact sense: Normally open or normally closed
Video alarm: Video call-up on matrix switcher, yes or no
Hold delay: Alarm hold after event, 0 to 14 seconds or infinite (cleared by keypad)
Annunciation: Site annunciation on KTD-304/404, yes or no
Find preset: Call up preset position on PTZ drive, yes or no
Position: Preset position number, 1 to 64
Report trouble: Enable or disable
  • Remotely monitors contact status
  • Multiple tasks assigned to contacts
  • Initiates automatic alarm functions
  • Capacity for up to 16 KTD-460 modules per chassis
  • 256 contact inputs (16 per module)
  • RS422 communication via twisted-pair cable
  • Output relay for external devices
  • Menu-driven contact programming
  • Programmable hold delay
  • Programmable contact sense

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > GE Security

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please