Home > Shop Brands > GE Security >

  GE Security GEC-MC100FXTXPOE Ethernet To Fiber (2Mm) 10/100 with PoE

GE Security GEC-MC100FXTXPOE Ethernet To Fiber (2Mm) 10/100 with PoE


 

Our Price : $162.86


Product Code: GEC-MC100FXTXPOE

Qty:

Description
 
The MC100FX-TX-PoE Series integrates two remote network technologies in a single product-100Base-FX to 10/100BaseTX Media Conversion with Power Sourcing Equipment and a PoE Injector-for wireless access points, IP-based surveillance cameras or IP phones.

With an IEEE 802.3af PoE Injector, the MC100FX-TX-PoE provides DC 48V voltage over Ethernet cables to optimize power management of network devices. A twisted pair of cables between the MC100FX-TXPoE and IEEE 802.3af compliant PD or PoE Splitter transfers data and power simultaneously.

The maximum distance from the PoE PSE to PD is 100 meters, but a fiber interface can extend the deployment range. The MC100FX-TXPoE PoE Media Converter can change an optical Ethernet signal to an electrical Ethernet signal, or a 10/100Base-TX signal to a 100BaseFX signal, to meet different network applications. The maximum networking distance can then extend as far as two kilometers and still sustain the transmission performance as high as 100Mbps.

The high performance Store-and-Forward mechanism prevents packet loss with IEEE 802.3x Flow Control (Full-Duplex). In addition, the LFP (Link Fault Pass-through) function, (LLCF / LLR) and DIP switch design will immediately alert administrators about link media problems and provide an efficient solution to monitor the net. The DIP switch can disable or enable this LFP function.

With data, long-reach fiber capability and PoE from one unit, the MC100FX-TX-PoE requires fewer cables and eliminates the need for dedicated electrical outlets. Plus, power and data switching are delivered over a single cable to prevent additional AC wiring costs and reduce installation time.

With the data, long-reach fiber capability and PoE from one unit, the MC100FX-TX-PoE will reduce cables and eliminate the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. It frees the Security IP Camera and wireless AP deployment from restrictions due to power outlet locations. Power and data switching are integrated into one unit and delivered over a single cable, eliminating costs for additional AC wiring and reducing installation time.

Specifications:

Interface:

Copper: 1-Port 10/100Base-Tx RJ-45 TP interface with PoE injector function Auto-negotiation, Auto MDI/MDI-X
Fiber: 1-Port 100Base-FX Multi-mode: 50/125 ?m or 62.5/125 ?m optic fiber
Fiber Port Type (connector): SC
Cable Distance: 1.2 miles (2 km)
Optical Frequency: 814 miles (1310 km)
Launch Power(dBm): Maximum: -14
Minimum: -19.0
Receive Sensitivity: -34.5
Maximum Input Power: -14

Power over Ethernet:

PoE Standard: IEEE 802.3af power over Ethernet
PoE Power Supply Type: End-Span / type A
Power PIN Assignment: 1/2(+), 3/6(-)
Power Output: PoE 48 VDC, Maximum 15.4 watts, 350 mA
Number of devices can be powered: 1

Hardware Specification:

Ether Data Rate: 10 / 100 MBps
Throughput (packet per second): 148810 pps @ 64 Bytes
Switch Architecture: Store-and-Forward
Flow Chart: Back pressure for half-duplex mode, IEEE 802.3x pause from for full-duplex mode
LED: System: power, status, FX/LNK: data active, fiber link, TX/LNK: 10/100 link / active, PoE in Use: detect PSE device
LFP mode: Enable: Either TP port or FX port is broken, shut down the other port, Disable: Link LED indicators still on if connection of the other end is broken
Installation: Stand-alone or wall-mount
Material: Metal
Hard Disk Space: 48 VDC, 0.38 A external AC-to-DC adaptor
Dimensions (HxWxD): 3.82 x 2.76 x 1.02" (97 x 70 x 26 mm)
Weight: 0.44 lb (0.2 kg)

Standards Conformance:

Regulation Compliance: FCC part 15 class A, CE
Protocols and Standards Compliance: IEEE 802.3 Ethernet, IEEE 802.3u Fast Ethernet, IEEE 802.3x Flow Control, IEEE 802.3af Power over Ethernet
Cables: TP: TIA-EIA-568, CAT 5/5e UTP cable, Fiber: Multi-mode: 50/125 ?m or 62.5/125 ?m optic fiber

Environmental:

Operating: Temperature: 32 to 122° F(0 to 50° C) Relative Humidity: 5 - 90% (non-condensing)
Storage: Temperature: -4 to 158Z° F (-20 to 70° C) Relative Humidity: 5 - 90% (non-condensing)

Electrical:

Power Requirement: 48 VDC, 0.38 A
Features
  • Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX, IEEE 802.3af Power Over Ethernet standard
  • Auto-negotiation for 10/100Base-TX half-duplex or 10/100Base-full-duplex
  • Compact size allows for easy installation
  • 100Base-FX interface for up to 2km (multi-mode fiber 50?m/125?m) on MC100FX-TX-POE
  • LED indicators offer simple network diagnosis
  • 48V/0.4A DC power supply
  • IEEE 802.3x full-duplex flow control, back pressure in half-duplex eliminate packet loss
  • Supports maximum frame size to 1600bytes
  • Supports auto MDI/MDI-X function
  • Store-and-Forward mechanism
  • Auto Loop Back Test function
  • Side DIP switch: LFP (Link Fault Pass-through) mode selection

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > GE Security
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please