Home > Shop Brands > GE Security >

  GE Security GEC-VT1000AC Mini Video Transmitter (24VAC)

GE Security GEC-VT1000AC Mini Video Transmitter (24VAC)


Our Price : $255.16

Product Code: GEC-VT1000AC


The VT1000AC from GE Security is a series video transmitter provides transmission of a fixed video signal using AM modulation on one multimode fiber optic cable. The transmitter includes a built-in isolation transformer allowing both the camera and fiber optic transmitter to be powered by the same 24VAC power supply. The VT1000AC video transmitter is compatible with the IFS VR1000, VR1001, VR1100, and VR2100 series receivers. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. The transmitter incorporates a power status indicating LED for monitoring proper system operation. The transmitter is available in a stand-alone version only.



Input Video: 1 volt pk-pk (75 ohms)
Bandwidth: 5 Hz - 10 MHz
Differential Gain: < 5 %.
Differential Phase: < 5 .
Tilt: <1%
Signal/Noise Ratio: 60dB


Optical Fiber: 62.5/125 micron multimode
Number of Fibers Required: 1
Optical Wavelength: 850nm
Optical Emitter Type: 850nm LED
Transmitter Output Power: 25w (-16 dB)
Optical Attenuation: No manual adjustments required

Status Indicators:

Power: On/Red - Off/Off


Optical: ST
Power: Terminal Block with Screw Clamps
Video: BNC (Gold Plated Center-PIN)


Power: 24VAC
Current Protection: Automatic re-settable solid-state current limiters
Voltage Regulation: Solid-state, Independent on each board
Circuit Board: UL 94 flame rated and meets all PCI standards.


Surface Mount Dimensions: 4.2" x 3.5" x 2.0" (10.67 cm x 8.90 cm x 5.08 cm)
Finish: Module shall be constructed of a metal enclosure with a powder coat finish model Number F63B12 with all connections and indicators silk-screened directly on unit. Rack mount units shall be constructed of anodized aluminum.
Weight: <2.0 lbs./1.0kg


MTBF: >100,000 Hours
Operating Temp: -40? C to +74? C
Storage Temp: -40? C to +85? C
Relative Humidity: 0% to 95% (non-condensing). If product is installed under condensation conditions, unit shall have conformal coating applied to the printed circuit board.

Regulatory Agencies/Approvals And Listings:

Underwriters Laboratory (UL) Listing Number: I.T.E. 6D16
Underwriters Laboratory Canada (ULC) Listing Number: I.T.E. 6D16
UL 94-flame rated PCB board: 94VO
  • AM Video Transmission
  • NTSC, PAL, SECAM Compatible
  • Full Color Compatibility
  • No In-field Electrical or Optical Adjustments Required
  • Built-in Isolation Transformer for Direct 24VAC Connection
  • Power Status Indicating LED to Monitor System Performance
  • Distances up to 3.5 miles (5.5 km) Without Repeaters

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > GE Security

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please