|
|
|
|
|
|
|
|
|
|
GRI 289-3C Recessed Instant On - 2893C
|
The PB-2020 Switch Series is a unique switch package, designed to incorporate a plunger or push-to-activate function into the shortest, most compact package available. Promoted as a solution to securing the newest generation of vinyl extruded or custom type windows, installation requires that a single hole be drilled, usually into the window frame, eliminating the troublesome and potentially costly hole in the window sash. Available as a press fit or screw mount with an adjustable plunger, the PB-2020 and PBF-2020 may be the most versatile reed switch to date. 3/8" Diameter Lifetime Warranty Colors: White, Mahogany and Gray Standard 12" leads or terminal block Longer leads and zip cord available on request Supervisory loops available
|
|
|
|
|
|
|
|
|
|
|
|
|
GRI's Roller Ball Switch is a unique application of a magnetic reed combined into a single package, mechanical plunger action and the reliability of a hermetically sealed switch. The ball plunger can be activated from any direction within 360 degrees, using a sliding motion such as that produced by the opening or closing of a door or window into its frame. But they also have been used very effectively as an interior trap device by mounting on a flat surface, such as a display table, and placing the protected object directly on the switch to conceal and actuate the roller ball. GRI Roller Ball Switches can work when nothing else will. Spacers and mounting hardware included with switch and also available separately. The terminal version is indicated by the addition of "T" after the part number. Roller Ball Switch Features Lifetime Warranty Colors: White and Mahogany UL and ULC Approved Available in Closed Loop, Open Loop and SPDT Works from all 360 Degree Directions Standard 12" Leads or Terminal Blocks Longer Leads, Zip Cord or Jacketed Cable Available Supervisory Loops Available Includes Mounting Hardware and Spacers Terminals Require no Soldering, B Connectors, or Taping Pre-travel .06" Total Travel .195"
|
All-Weather Stainless Steel Steel Surface Mount
|
|
|
|
|
|
|
|
|
|
|
|
|
All-Weather Construction
|
The 120T/4473 requires that a 3/4" hole be drilled for the switch and 3/8" hole for the magnet. The 3/4" switch mounting is desirable since the extra wire and connections can be more easily inserted into the larger hole for concealment. Also, should the need arise for testing or replacement, it would be easy to pull the switch, extend the extra wire and access the original connections. Installation is further enhanced by using a smaller 3/8" diameter magnet to avoid the need to center a larger hole in a 1" to 1 1/2" thick door or window. This will allow you to offset the magnet should it be required. The 120T/4473 switch set was developed for and should only be used in openings with wooden or aluminum frames. 120T/4473 Series Features Lifetime Warranty Available in closed loop, open loop and SPDT Wire leads or terminal blocks 12" leads Available with new rare earth Magnets Longer Leads, Zip Cords, or Jacketed Cable on Request Built-in Resistors and Diodes Available on Request Switches or Magnets are Available Separately Supervisory Loops Available
|
|
|
|
|
|
|
|
|
|
|
|
|
GRI 1846 Surface Mount/Button Only For 189 And 289 Series Pool Alarms
|
GRI 184CP-6 Colors W, Surface Mount Button Only For Child Resistant Pool Alarms - 184CP6
The GRI Child Resistant Pool Alarm is designed to operate with either a 9 volt battery or external DC power supply. The surface and recessed mode
|
|
|
|
|
|
|
|
|
|
|
|
|
The 20F and 20 OF Series are a flush mount design that enable the installer to combine the security of a screw mount flanged switch with the concealment of a press fit switch. They have been used in hollow aluminum frames where inadequate material depth will not reliably retain a press fit switch and in holes that have been drilled or have somehow become slightly oversized. They are available in 1/2" to 1 1/2" gap. Mounting hardware is provided. 20/20OF Series Features Lifetime Warranty Colors: White, Mahogany, Gray or Black UL and ULC Approved Available in Closed Loop, Open Loop, SPDT and DPDT Standard 12" Leads Longer Leads, Zip Cord or Jacketed Cable on Request Built-in E.O.L. Resistors and Diodes Available on Request Switches or Magnets are Available Separately Round or Oval Flange Available Standard Gap 1/2"+ Wide Gap 1"+ Extra Wide Gap 1 1/2"+ Supervisory Loops Available
|
GRI 229PD Recessed Ansi Switch DPDT
|
|
|
|
|
|
|
|
|
|
|
|
GRI 2600T Colors G, Water Sensor/normally Closed For A Closed Loop Circuit/12 Volts DC/With 2 Probes - 2600T
Undetected water damage such as that caused by leaking pipes or corroded water heaters cost homeowners ten’s of thousands of dollars each year. Such repairs are time consuming and costly to correct. Applications could include computer room sub-floor areas, telephone equipment rooms, bathrooms, laundry rooms, any areas adjacent to a water storage tank or piping. Also evaporative air conditioners, drip pans, overflows and/or drains
|
GRI 289-4C Pool Alarm with Form C Relay Output, Surface Mount, Instant On
|
|
|
