 |
 |
 |
|
The Model 31A00-8 Extended Range Temperature and Humidity Sensor is used for sensing temperatures from -40° F - 120° F. When connected to an HAI Home Control System with Firmware Version 2.8 or higher. It can also be used for reporting the relative humidity from 0 to 100 percent. The Model 31A00-8 features a new, high accuracy temperature sensor. The temperature can be used to activate programs for controlling temperatures in attics, garages, greenhouses, basements, wine cellars, coolers, and freezers. The temperature can be displayed on the console or touchscreen, or spoken over the telephone. It can also report, log, alert, or generate an alarm if the temperature reaches freeze conditions or if the temperature goes above the high setpoint or drops below the low setpoint programmed in the system. High and low humidity limits can be set for taking action (i.e. turning on the bathroom vent fan, running a/c in de-humidification mode, turning on humidifier in heating mode, etc.) or reporting high or low humidity conditions in homes, greenhouses, wine cellars, coolers, humidors, etc. Controlling humidity is particularly helpful in combating the growth of mold in vulnerable areas of the home, such as bathrooms, basements, attics, etc. When used outdoors, the Model 31A00-8 should be mounted under an overhang to protect it from direct sunlight and rain. It is coated with a sealant to withstand outdoor moisture. The outdoor temperature and/or humidity can be displayed on the console or touchscreen, or spoken over the telephone. Furthermore, the outdoor temperature can be displayed on an HAI communicating thermostat. Automation programs, macros, and indoor appliances can be controlled based on the outdoor temperature and/or humidity.
Specifications:
HAI Product No.: 31A00-8
Dimensions: 2.75" W x 2.75" H x 1" D
Temperature Range: -40° F to 120° F
Humidity Range: 0% to 100% relative humidity
Current Consumption: 15mA maximum
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Tempurature sensor from -40° - 120° F and humidity
- Allows monitoring and activating programs based on tempurature
- May be calibrated
- Includes accessory kit and instructions and must be connected directly to HAI controller using a 4-conductor
|
|
|
|
|
|
|
|
|
