Home > See Brand Names > 3M >

  HAI 32A30-4 Touchscreen Hub with No Video Encoder with Structured Mounting Plate
HAI 32A30-4 Touchscreen Hub with No Video Encoder with Structured Mounting Plate


 

Our Price : $777.20

Special Instructions: Call for a better Price 212-537-6475
UPC Code: 872257002508

Product Code: 1877646

Qty:

Description
 
The Touchscreen Hub is available in an HAI enclosure (same as used on Omni IIe and OmniPro II) or on the Universal Mounting Plate for installation in Structured Wiring enclosures. It is supplied with a switching power pack and uses two standard sealed, rechargeable security batteries (not supplied). The Touchscreen Hub supports up to eight OmniTouch 5.7, OmniTouch, or OmniTouch with Video touchscreens. A video encoder for the Touchscreen Hub is no longer available. If you wish to view video on an HAI Touchscreen, your options are as follows:

You must use one of HAI's IP-based Touchscreens, such as an OmniTouch 5.7e. You may use IP Cameras that provide jpg or mjpg output or Analog Cameras that are connected to an HAI Camera Server.

The Touchscreen Hub provides battery backed power for multiple touchscreens, cameras and the Video Encoder. It has convenient connections and power terminals for a neat installation. There are inputs for six individual cameras, which can be selected by the touchscreens for viewing. Six individual outputs allow the cameras to also be viewed on monitors, TV sets, video recorders, etc. HAI designed the Hub to eliminate the unsightly and unreliable "wall wart" transformers, power strips, "Y" connectors, external power supplies, battery back up units and complex wiring normally associated with camera and Touchscreen installations. In addition to simplifying the installation, the power supply has low voltage cut out and automatically sequences the start up of Touchscreens for long term reliability and zero maintenance. The batteries are recharged automatically.
Features
  • Connections for 8 Touchscreens: Cat 5 (RJ-45) for OmniTouch with Video, 4 conductor for OmniTouch
  • Inputs from 6 NTSC Composite color or black & white cameras
  • Pass-through outputs for 6 cameras to TV, modulator, media center, other displays, etc.
  • Power supply with battery back up for Touchscreens (24 V at XX A)
  • Power supply with battery back up for cameras (12 V at 1.5 A)
  • Connections for all Omni family and Lumina family home control systems (console bus and ground, 3 wires)
  • Supports Video Encoder - (mounts on Hub circuit board), required to use video on an OmniTouch 5.7 or OmniTouch with Video Touchscreen
  • Supervisory output can be connected to Omni zone to indicate low battery
  • Connectors for two sealed batteries, 12 V at 4 to 8 amp-hours each (not supplied)
  • Supplied with Universal Switching Power Pack, 100-240 VAC, 50/60 Hz

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

See Brand Names > 3M
Wire & Cable > Structured Wiring > Distribution Panels > SuperPro Housings, Cans, Covers
Wire & Cable > Structured Wiring > SuperPro Hubs
Shop Brands > Silent Knight by Honeywell
Shop Brands > Camden Door Controls > Door Activation Devices > Push/Exit Buttons > Illuminated Push Buttons > Rectangular Illuminated
Shop Brands > Leviton > Audio, Video & Data Products > Residential Solutions > Structured Media Centers
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please