Home > Shop Brands > Leviton > Audio, Video & Data Products > Copper Systems >

  HAI 35A00-3CS 600 Watt Non-Dimming Switch - Case of 12
HAI 35A00-3CS 600 Watt Non-Dimming Switch - Case of 12


Our Price : $950.40

Special Instructions: Call for a better Price 212-537-6468
UPC Code: 872257001778

Product Code: 1877762


The 600 Watt UPB Non-Dimming Switch is used for controlling loads up to 600 Watts. It comes with a default white paddle, connectors, and instructions.


Requires a neutral (white) connection wire. If you are using an HAI home control system with your switch you must install a UPB PIM & cable (HAI Part Number 36A00-1). If you are using the HAI Upstart Configuration software you must install an UPB PIM & cable (HAI Part Number 36A00-1) and a cable to connect your PIM to a computer (HAI Part Number 36A05-2).


HAI recommends that every HAI Lighting Control (HLC) installation include a Phase Coupler (HAI Part Number 39A00-1). All HLC products are UL Listed and use Universal Powerline Bus (UPB) a digital communications standard for lighting and home control that ensures superior reliability. UPB has been extensively tested and researched in residential environments and found to be 99.9 percent reliable. UPB works over existing wires in a home and does not require new wiring. The HAI UPB 600W Non-Dimming Switch is capable of being set to a dimming mode.


These 600W Non-Dimming switches are for loads like compact fluorescent and high efficiency lighting fixtures that should not be dimmed. The 600 Watt UPB Dimmer Switch works as a standalone switch or may be used with other HAI Products, including Scene Switches, House Status Switches, and Home Control Systems to provide sophisticated lighting control.

Switch LED:

The 600W switch comes with equipped with a multi-color LED indicator, which may be set to off, blue, red, or magenta. The default settings are as follows: Switch is off - LED is blue, Switch is on - LED is off

De-rating :

In three-gang installations the switch must be de-rated to 500W


This switch comes with a default white paddle, connectors, and instructions. Switch Color Change Kits (HAI Part Number 35A14-color codeCS) are available in in White (WH), Ivory (IV), Almond (AL), Light Almond (LTA), Brown (BR), Grey (GR), and Black (BL) colors. They are sold in case lots of 12 only.


No Wallplate is included when you purchase this switch. With the exception of the 1500W and 2400W models, HLC switches accommodate standard Decora-style wallplates. Mix and match to easily add a personalized touch to any room.

Configuration Software:

When used with an HAI Home Control System HLC products automatically configure themselves, and outside software is not required. HAI offers HAI UPB UPStart Configuration software for professionals who desire to make advanced changes to our default setup. HAI UPB UPStart configuration software will allow you to change the function of this dimming switch to be non-dimming or vice-versa. This software also allows you to change the colors on the switch's LED and the rate that it brightens to fully on or dims to fully off.
  • Used for controlling non-dimming loads, such as fluorescent lights, up to 600 watts
  • Includes a white paddle, connectors, instructions
  • Color Change Kit available
  • Uses standard Decora wallplate (not included)
  • 12-pack
  • UPB switch for non-dimming loads, such as fluorescent lights

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Leviton > Audio, Video & Data Products > Copper Systems
Wire & Cable > Structured Wiring > SuperPro Hubs > Data
Shop Brands > IEI International Electronics Inc. > Multi-Function Timer
Shop Brands > Camden Door Controls > Electrified Locks, Relays & Timers > Relays and Timers > Lock-Out Relays

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please