Home > See Brand Names > 3M >

  HAI 32A30-1 Touchscreen Hub with Video Enclosure
HAI 32A30-1 Touchscreen Hub with Video Enclosure


Our Price : $1,119.00

Special Instructions: Call for a better Price 212-537-6370
UPC Code: 872257002478

Product Code: 503826


The Touchscreen Hub provides battery backed power for multiple touchscreens, cameras and the Video Encoder. It has convenient connections and power terminals for a neat installation. There are inputs for six individual cameras, which can be selected by the touchscreens for viewing. Six individual outputs allow the cameras to also be viewed on monitors, TV sets, video recorders, etc. HAI designed the Hub to eliminate the unsightly and unreliable "wall wart" transformers, power strips, "Y" connectors, external power supplies, battery back up units and complex wiring normally associated with camera and touchscreen installations. In addition to simplifying the installation, the power supply has low voltage cut out and automatically sequences the start up of touchscreens for long term reliability and zero maintenance. The batteries are recharged automatically.


HAI Product No.: 32A30-1
Dimensions: 13 1/4" W x 13 1/4" H x 4 1/2" D
Power Pack: Output: 19V DC, 3.79 Amps, max. 72 W; input: 120V AC, 1.8 Amps, 60Hz
Maximum Power: 72 watts
Batteries: sealed, rechargeable, 12 volts, 4-8 amp-hours each
Low Voltage Cut Out: 10V DC
Main Fuse: 5A Polyfuse
Battery Fuses: 5A Polyfuse
Camera Power: Nominal voltage: 12V DC; maximum current: 1.5A
Touchscreen Connections: 8 cat. 5; 8 4-conductor
Operating Temperature: 32 F to 120 F (0 C to 49 C)
Relative Humidity: 10-85%, non-condensing
  • Connections for 8 touchscreens: Cat 5 (RJ-45) for OmniTouch with Video, 4 conductor for OmniTouch
  • Inputs from 6 NTSC Composite color or black & white cameras
  • Pass-through outputs for 6 cameras to TV, modulator, media center, other displays, etc.
  • Power supply with battery back up for touchscreens (24 V at XX A)
  • Power supply with battery back up for cameras (12 V at 1.5 A)
  • Connections for all Omni family and Lumina family home control systems (console bus and ground, 3 wires)
  • Supports Video Encoder (mounts on Hub circuit board), required for OmniTouch with Video
  • Supervisory output can be connected to Omni zone to indicate low battery
  • Connectors for two sealed batteries, 12 V at 4 to 8 amp-hours each (not supplied)
  • Supplied with Universal Switching Power Pack, 100-240 VAC, 50/60 Hz.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

See Brand Names > 3M
Wire & Cable > Structured Wiring > Distribution Panels > SuperPro Housings, Cans, Covers
Shop Brands > Hardware Products > Drill Bits
Shop Brands > IEI International Electronics Inc. > Qualified PC Modems
Shop Brands > Camden Door Controls > Door Activation Devices > Push/Exit Buttons > Illuminated Push Buttons > Single Gang

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please