 |
 |
 |
|
The ProxPro proximity card reader's weatherproof design and architecturally attractive enclosure allows easy mounting indoors or out. The ProxPro Reader is ideal for applications requiring a larger read range.
Ideal for medium-range applications. Available with Wiegand, Serial (RS-232/RS-422) or Clock-and-Data interface. Sealed for indoor or outdoor use. Optional glass mount kit available for mounting the reader behind glass. Available in gray or beige.
Specifications:
Typical Maximum Read Range
ProxCard II Card - up to 8" (20 cm)
ISOProx II Card - up to 7" (17.5 cm)
DuoProx II Card - up to 7" (17.5 cm)
Smart ISOProx II Card - up to 7" (17.5 cm)
Smart DuoProx II Card – up to 7" (17.5 cm)
HID Proximity & MIFARE® card – up to 7" (17.5 cm)
ProxCard Plus Card - up to 3" (7.5 cm)
ProxKey II Keyfob - up to 3" (7.5 cm)
MicroProx Tag – up to 4" (10.2 cm)
ProxPass Active Vehicle Tag – N/A
Depending on local installation conditions.
Dimensions: 5.0" x 5.0" x 1.0" (12.7 x 12.7 x 2.54 cm)
Power Supply: 10-28.5 VDC; Linear power supplies recommended. Reverse voltage protection included.
Current Requirements:
Average: 100 mA (12 VDC)
Peak: 120 mA (24 VDC)
Operating Temperature: -22° to 150° F (-30° to 65° C)
Operating Humidity: 0-95% relative humidity non-condensing
Weight: 12 oz. (336 gm)
Cable Distance:
Wiegand or Clock and Data interface: 500 feet (152 m)
RS-232 interface: 50 feet (15 m)
RS-422 interface: 4000 feet (1219 m)
Recommended cable is ALPHA 1295 (22 AWG) 5 conductor stranded with overall shield or equivalent.
Additional conductors may be required for LED or beeper control. RS-422 requires ALPHA 6212C 2-Twisted Pair, shielded cable with drain wire, or equivalent for data, plus ALPHA 1292C two-conductor shielded or equivalent for DC power.
Certifications:
Canada/UL 294 Listed: Access Control System Units
FCC Certification, United States
Canada Certification
CE Mark, Fifteen EU Countries under the R&TTE
Directive (EN60950 - ITE Electrical Safety, EN 300 330 - SRD, and ETS 300 683 - EMC)
IEC60950, ITE CB Scheme Electrical Safety
Australia C-Tick Mark, New Zealand EMC, China
Taiwan (5355 only)
- Overview Key Features Specifications
- The ProxPro proximity card reader's weatherproof design and architecturally attractive enclosure allows easy mounting indoors or out. The ProxPro Reader is ideal for applications requiring a larger read range.
- Ideal for medium-range applications.
- Available with Wiegand, Serial (RS-232/RS-422) or Clock-and-Data interface.
- Sealed for indoor or outdoor use.
- Optional glass mount kit available for mounting the reader behind glass.
- Available in gray or beige.
-
- Affords high reliability, consistent read range characteristics, and low power consumption in a single, easy-to-install package.
- Features multicolor LED, internal or host control of the LED, and/or beeper and a beeper "off" switch for silent operation.
- Provides Wiegand protocol interface compatibility with all standard access control systems.
- Offers an optional, fully integrated personal identification number keypad for heightened security. Can be mounted to glass (using the optional glass mounting kit).
-
- Typical Maximum Read Range*
- ProxCard® II Card - up to 8" (20 cm)
- ISOProx® II Card - up to 7" (17.5 cm)
- DuoProx® II Card - up to 7" (17.5 cm)
- Smart ISOProx® II Card - up to 7" (17.5 cm)
- Smart DuoProx® II Card – up to 7" (17.5 cm)
- HID Proximity & MIFARE® card – up to 7" (17.5 cm)
- ProxCard® Plus Card - up to 3" (7.5 cm)
- ProxKey® II Keyfob - up to 3" (7.5 cm)
- MicroProx® Tag – up to 4" (10.2 cm)
- ProxPass® Active Vehicle Tag – N/A
- *Depending on local installation conditions.
- Dimensions
- 5.0" x 5.0" x 1.0" (12.7 x 12.7 x 2.54 cm)
- Power Supply
- 10-28.5 VDC; Linear power supplies recommended. Reverse voltage protection included.
- Current Requirements
- Average: 100 mA (12 VDC)
- Peak: 120 mA (24 VDC)
- Operating Temperature
- -22° to 150° F (-30° to 65° C)
- Operating Humidity
- 0-95% relative humidity non-condensing
- Weight
- 12 oz. (336 gm)
- Cable Distance
- Wiegand or Clock and Data interface: 500 feet (152 m)
- RS-232 interface: 50 feet (15 m)
- RS-422 interface: 4000 feet (1219 m)
- Recommended cable is ALPHA 1295 (22 AWG) 5 conductor stranded with overall shield or equivalent.
- Additional conductors may be required for LED or beeper control. RS-422 requires ALPHA 6212C 2-Twisted Pair, shielded cable with drain wire, or equivalent for data, plus ALPHA 1292C two-conductor shielded or equivalent for DC power.
- Certifications
- Canada/UL 294 Listed: Access Control System Units
- FCC Certification, United States
- Canada Certification
- CE Mark, Fifteen EU Countries under the R&TTE
- Directive (EN60950 - ITE Electrical Safety, EN 300 330 - SRD, and ETS 300 683 - EMC)
- IEC60950, ITE CB Scheme Electrical Safety
- Australia C-Tick Mark, New Zealand EMC, China
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Affords high reliability, consistent read range characteristics, and low power consumption in a single, easy-to-install package.
- Features multicolor LED, internal or host control of the LED, and/or beeper and a beeper "off" switch for silent operation.
- Provides Wiegand protocol interface compatibility with all standard access control systems.
- Offers an optional, fully integrated personal identification number keypad for heightened security.
- Can be mounted to glass (using the optional glass mounting kit).
|
|
|
|
|
|
|
|
|
