Home > Shop Brands > HID Global Corporation >

  HID Global Corporation 6020ANN00 MultiProx HSM Interface

HID Global Corporation 6020ANN00 MultiProx HSM Interface


Our Price : $164.41

UPC Code: 781410348158

Product Code: 482500


The HSM (HID Switch Monitor) is the direct replacement of the Schlage/Westinghouse MSM that is used in the MultiProx reader subsystem. The HSM interfaces from one to four sets of contacts that are reported to an access control /monitoring system by relay contacts on the MultiProx Controller.The relay outputs mimic the switch inputs monitored by the HSM.Replacement of the Schlage/Westinghouse MSM consists of removing and replacing the existing MSM circuit board with the HSM. The HSM is only required when the MSM is installed remotely from the Schlage/Westinghouse 708 or 808 panel. If the MSM is located next to or near the 708/808 panel and the wiring for the switches are accessible, the existing wiring maybe used to wire directly into the Access Control Panel. The typical applications for the contacts are door switch, request to exit (REX), infrared (IR) motion detectors, glass break detectors, or other types of monitoring devices.

The relays on the controller are energized in the normal state. If the controller loses power, the relays will deenergize and change to the “alarm” state. The relay outputs are grouped by channel and have specific connector assignments.
  • The MultiProx HSM replaces the Schlage MSM, which contains four inputs and four dry contacts.
  • Dimensions: 4.5" H x 4.5" W x 2.3" D (11.4cm H x 11.4cm W x 5.8cm D)

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > HID Global Corporation

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please