|
|
|
|
|
|
|
|
|
Using ADEMCO's motion detectors for multiplex system is a smart and sensible thing to do. Whether it's a commercial or residential installation, these newest sensors offer you the following cost-saving benefits: - Point ID identifies the exact location of the intruder. And with the built-in Remote Point Module, the cost is less than a separate module and sensor.
- ADEMCO's patented Global Polling technology senses alarms up to 8 times faster than conventional multiplex.
- ADEMCO's unique 2-wire multiplex reduces installation costs over conventional 4-wire hardwire and multiplex approaches: Wire cost is reduced and less than half the number of connections are necessary - No more need to home run wiring
Each sensor draws super low current, reducing power & battery requirements on large installations while allowing for longer wire runs or smaller gauge wire Features: 35' x 45' coverage Built-in Remote Point Module with DIP switch addressing SMD construction for excellent RFI immunity Spare long range mirror Extremely low current Tamper 6 year over-the-counter warranty
|
It makes sense to use ADEMCO's smart motion detectors for multiplex systems. Not only are they smarter than ever, but they provide the opportunity to reduce your overall installation costs! The 4278EX and 4278EX-SN can be used with any Honeywell alarm system that supports Multiplex Addressing, including the VISTA-40, VISTA-50, 4140XMP, and VISTA-100. The 4278EX may also be used with the 5140XM. Features: Built-in Remote Point Module with Point ID identifies the exact location of the intruder with either a DIP Switch Address (4278EX) or a Serial Number Address as distinctive as a fingerprint (4278EX-SN) Honeywell’s patented Global Polling technology senses alarms up to eight times faster than conventional multiplex Honeywell’s unique two-wire multiplex reduces installation costs over conventional four-wire hardwire and multiplex approaches by reducing both wire costs and the number of connections Super low current, reduces power and battery requirements on large installations Tamper Extra Contact Loop 40ft. x 50ft. Coverage Quad AP Processing for Improved False Alarm Immunity Built-In Remote Point Module Six Year Warranty Specifications: Detection Method: Passive Infrared Coverage:
- wide angle mirror: 40' x 50' (12.2m x 15.2m)
- long range/curtain mirror: 80' x 7.5' (24.4m x 2.3m) Detection Pattern 12 zones - seven main, four intermediate, One downward (wide angle mirror) 1 zone, seven tiers (long range/curtain mirror) Pulse Count: Signal processing/instant response (installer selectable) Detectable Walk Rate 0.5-5 ft/sec (0.15-1.5m/sec) Mounting 7' (2.1m) nominal Indicators: Red LED with enable/disable switch Input Voltage 8-11V peak at polling loop terminals Current Less than 1mA (LED) inactive, 9mA approx. (LED active) Operating Temp: 32° to 122°F (0° to 50°C) Operating Humidity: Up to 95% RH (max.), non-condensing Dimensions: 3 1/4"W x 4 5/8"H x 2"D (85mm x 120mm x 50mm)
|
|
|
|
|
|
|
|
|
|
|
|
|
It makes sense to use ADEMCO's smart motion detectors for multiplex systems. Not only are they smarter than ever, but they provide the opportunity to reduce your overall installation costs! The 4278EX and 4278EX-SN can be used with any Honeywell alarm system that supports Multiplex Addressing, including the VISTA-40, VISTA-50, 4140XMP, and VISTA-100. The 4278EX may also be used with the 5140XM. Features: Built-in Remote Point Module with Point ID identifies the exact location of the intruder with either a DIP Switch Address (4278EX) or a Serial Number Address as distinctive as a fingerprint (4278EX-SN) Honeywell’s patented Global Polling technology senses alarms up to eight times faster than conventional multiplex Honeywell’s unique two-wire multiplex reduces installation costs over conventional four-wire hardwire and multiplex approaches by reducing both wire costs and the number of connections Super low current, reduces power and battery requirements on large installations Tamper Extra Contact Loop 40ft. x 50ft. Coverage Quad AP Processing for Improved False Alarm Immunity Built-In Remote Point Module Six Year Warranty Specifications: Detection Method: Passive Infrared Coverage:
- wide angle mirror: 40' x 50' (12.2m x 15.2m)
- long range/curtain mirror: 80' x 7.5' (24.4m x 2.3m) Detection Pattern 12 zones - seven main, four intermediate, One downward (wide angle mirror) 1 zone, seven tiers (long range/curtain mirror) Pulse Count: Signal processing/instant response (installer selectable) Detectable Walk Rate 0.5-5 ft/sec (0.15-1.5m/sec) Mounting 7' (2.1m) nominal Indicators: Red LED with enable/disable switch Input Voltage 8-11V peak at polling loop terminals Current Less than 1mA (LED) inactive, 9mA approx. (LED active) Operating Temp: 32° to 122°F (0° to 50°C) Operating Humidity: Up to 95% RH (max.), non-condensing Dimensions: 3 1/4"W x 4 5/8"H x 2"D (85mm x 120mm x 50mm)
|
Integrated Keypad/Receiver with 2 Door/Window Transmitters, Wireless Key & Wireless PIR This item contains: 6150RF - Fixed English display keypad / receiver (2) 5816 - Door/Window Transmitter 5804 - Four Button Wireless Key 5890 - Wireless PIR motion detector
|
|
|
|
|
|
|
|
|
|
|
|
This package includes:
VISTA-10P control panel 6150RF Deluxe Fixed English Integrated Keypad/Receiver Aurora PIR Wave 2 2-tone sounder 5890PI Wireless PIR motion detector with pet immunity 2 - 5816 Door/Window Transmitter 467 Battery
|
This package includes:
VISTA-10P control panel 6150RF Deluxe Fixed English Integrated Keypad/Receiver Aurora PIR Wave 2 2-tone sounder 5890PI Wireless PIR motion detector with pet immunity 2 - 5816 Door/Window Transmitter 5804 Four Button Wireless Key 467 Battery
|
|
|
|
|
|
|
|
|
|
|
|
Kit includes:
one VISTA-15P 6-zone control panel one 6150RF Deluxe Fixed English Integrated Keypad/Receiver one 5890PI Wireless PIR motion detector with pet immunity one WAVE2 two-tone siren two 5816 Door/Window Transmitters one 467 12V; 4 Ah battery
|
Kit includes:
one VISTA-15P 6-zone control panel one 6150RF Deluxe Fixed English Integrated Keypad/Receiver one 5890PI Wireless PIR motion detector with pet immunity one WAVE2 two-tone siren two 5816 Door/Window Transmitters one 5804 Four Button Wireless Key one 467 12V; 4 Ah battery
|
|
|
|
|
|
|
|
|
|
|
|
Kit includes:
one VISTA-20P control panel one 6150RF Deluxe Fixed English Integrated Keypad/Receiver one WAVE2 two-tone siren two 5816 Door/Window Transmitters one 5890PI Wireless PIR motion detector with pet immunity one 467 12V; 4 Ah battery |
The NetworX NX-4 is a feature-rich, entry level security system. The NX-4 uses advanced technology for burglary, fire and environmental detection without the high cost of similar controls. Standard Features
- Expandable to 8 fully programmable hardwire and/or wireless zones
- Maximum of 8 keypads with 1 partition
- Eight user codes
- 185-event history log that provides date, time, event and user number
- Wireless technology with up to 8 supervised zones
- Hardwire expan
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the AM6000 AlertMaster Notification System. Notifes user of unusual motion such as an intruder.
|
INSITE VIDEO SYSTEMS WORLDWIDE GH-3300BWA Pir-Bw-A-Upgrade System - INSITE VIDEO SYSTEMS WORLDWIDE GH-3300BWA
|
|
|
