You are here: Home > Burglar Alarms / Intrusion >

Sensors for Burglar Alarm Systems

> Hold Up Buttons & Switches
We found 26 results matching your criteria.
Hold Up Buttons & Switches
Sort By:
Page of 3
Ademco / Honeywell 268 - Hold-Up Switch Ademco / Honeywell 269R - Hold-Up Switch
Features:
  • No chance of accidental tripping
  • Smooth operation without danger of being detected
  • Supplied with SPDT contacts for open or closed circuit systems

ADEMCO’s series of hold-up devices have been designed for silent operation. Available in a stainless steel cover or hardwired, V-Plex and wireless versions, they mount quickly and easily in discreet locations. They are ideally suited for use in locations such as banks, jewelry stores, retail establishments or any situation that requires hold-up notification.

Features:
  • Double-pole double-throw contacts for multi-notifications
  • Switch design provides totally silent operation
  • Twin 45° screw terminals with EOL resistor splicing terminal
  • Adhesive pads for temporary positioning prior to screw mounting
  • Operating temp: 14˚ F to 140˚ F
  • Listed for UL636 Hold-Up alarm units and systems
  • Dimensions: 3-1/2" L x 2" W x 1-1/4" D
  • Ademco / Honeywell 269SN - V-Plex Hold-Up Switch with Stainless Steel Cover (Polling Loop Only) Ademco / Honeywell 270R - Hold-up Switch
    ADEMCO’s series of hold-up devices have been designed for silent operation. Available in a stainless steel cover or hardwired, V-Plex and wireless versions, they mount quickly and easily in discreet locations. They are ideally suited for use in locations such as banks, jewelry stores, retail establishments or any situation that requires hold-up notification.

    Features:
  • Silent operation
  • Double-pole double-throw contacts for multi-notifications
  • Twin 45° screw terminals with EOL resistor splicing terminal
  • Adhesive pads for temporary positioning while installing
  • Stainless steel cover
  • Fully supervised
  • Convenient reset key for testing and/or reset of alarm
  • ADEMCO’s series of hold-up devices have been designed for silent operation. Available in a stainless steel cover or hardwired, V-Plex and wireless versions, they mount quickly and easily in discreet locations. They are ideally suited for use in locations such as banks, jewelry stores, retail establishments or any situation that requires hold-up notification.

    Features:
    • Silent operation
    • Double-pole double-throw contacts for multi-notifications
    • Twin 45° screw terminals with EOL resistor splicing terminal
    • Adhesive pads for temporary positioning while installing
    • Stainless steel cover
    • Fully supervised
    • Convenient reset key for testing and/or reset of alarm
    GRI HDI Hold-Up Device SECO LARM SS-074 Double-Button Momentary Hold-Up Switch With Spst Contacts For Open Circuit Rated 1A AT25VDC 12 Leads - SECO LARM SS074

    GRI HDI Hold-Up Device


    Our Price : $51.58

    The G.R.I. HD-1 and HD-2 Hold-Up Devices can be installed in fast food restaurants, banks, mini-marts, health care facilities, jewelry stores or any installation that calls for an absolutely silent emergency alarm. HD-1 and HD-2’s unique design features a glowing green LED to indicate an armed state. To insure against accidental tripping, both finger pads are required to be touched simultaneously.

  • Silent Operation
  • No Moving Parts
  • LED Indicates Armed State and Alarm Condition
  • Low Profile
  • SECO LARM SS-074 Double-Button Momentary Hold-Up Switch With Spst Contacts For Open Circuit Rated 1A AT25VDC 12 Leads - SECO LARM SS074

    United Security Products COR-2 - HOLD UP RAIL - LATCHING, DPDT United Security Products HUB2 - Hold Up Button - Latching, DPDT, 6 Solder Terminals
    The model COR-2 is a DPDT foot rail used to trigger a signal in banks, credit unions, jewelry and liquor stores, and other places where protection of valuables against holdup is necessary. Model COR-2 will activate a holdup signal, camera or both at the same time. The COR-2 is activated by the operator inserting the toe of a shoe under the unit, and then raising the switch plate. Once activated, the switch can only be reset by inserting a flat bladed screwdriver into the access hole provided in the side to the enclosure, and pulling the switch plunger back out.

    • UL LISTED
    • DPDT LATCHING SWITCH
    • RUGGED STAINLESS STEEL CONSTRUCTION

    Electrical Characteristics
    Rated Voltage: 125/250
    Rated Current: 10 Amps

    DIMENSIONS:
    Height: 4.5 inches
    Bottom Length:11.875 inches
    Top Length: 10.125 inches
    Width: 3.375 inches

    Hubs can handle your toughest applications including multiple cameras, recorders, alarms and machinery, as well as Hold Up notification, all simultaneously.

    Recessed button prevents accidental activation, and latching switches have a reset tool included. Use to trigger a silent alarm and activate cameras and equipment, all with the same switch.

  • Manufactured with gold, silver and copper for maximum conductivity and corrosion resistance, with a current rating of 10 amps, and a voltage rating of 125/250 volts.
  • United Security Products HUB2A - Hold Up Button - Latching, DPDT, 3 Screw & 3 Solder Terminals United Security Products HUB2A-ES Hold Up Button, Latching, DPDT, 3 Screw, 3 Solder Terms, w/Emergency External Activator
  • Manufactured with gold, silver and copper for maximum conductivity and corrosion resistance, with a current rating of 10 amps, and a voltage rating of 125/250 volts.
  • Recessed button prevents accidental activation, and latching switches have a reset tool included.
  • Use to trigger a silent alarm and activate cameras and equipment, all with the same switch.
  • Manufactured with gold, silver and copper for maximum conductivity and corrosion resistance, with a current rating of 10 amps, and a voltage rating of 125/250 volts.
  • Recessed button prevents accidental activation, and latching switches have a reset tool included.
  • Use to trigger a silent alarm and activate cameras and equipment, all with the same switch.
  • United Security Products HUB2B - Hold Up Button - Latching, DPDT, 6 Screw Terminals United Security Products HUB2B-ES Hold Up Button - Latching, DPDT, 6 Screw Terminals, w/Emergency External Activator
  • Manufactured with gold, silver and copper for maximum conductivity and corrosion resistance, with a current rating of 10 amps, and a voltage rating of 125/250 volts.
  • Recessed button prevents accidental activation, and latching switches have a reset tool included.
  • Use to trigger a silent alarm and activate cameras and equipment, all with the same switch.
  • Manufactured with gold, silver and copper for maximum conductivity and corrosion resistance, with a current rating of 10 amps, and a voltage rating of 125/250 volts.
  • Recessed button prevents accidental activation, and latching switches have a reset tool included.
  • Use to trigger a silent alarm and activate cameras and equipment, all with the same switch.
  •    
     
    Hold Up Buttons & Switches
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please