The MM447 product is a Magic Module (MM443), a Recordable Voice Annunciator (MV480), and a Caddx NX Security Interface (ML8) integrated onto a single printed circuit board. It was specifically designed to mount into a Caddx NX series Control allowing for quicker and easier implementation of integration and automation applications such as the popular HomeControl.
Switch Color Change Kits are available in White (WH), Ivory (IV), Almond (AL), Light Almond (LTA), Brown (BR), Grey (GR), and Black (BL) colors.
(Standalone, Omni family or Lumina family home control systems)
The Auxiliary Switch is used in conjunction with HLC switches for multi-way lighting circuits. It comes with a default white paddle, connectors, and instructions.
Switch Color Change Kits (HAI Part Number 35A14-color codeCS) are available in White (WH), Ivory (IV), Almond (AL), Light Almond (LTA), Brown (BR), Grey (GR), and Black (BL) colors. They are sold in case lots of 12 only.
Scene Switch Color Change Kits are available in White (WH), Ivory (IV), Almond (AL), Light Almond (LTA), Brown (BR), Grey (GR), and Black (BL) colors.
House Status Switch Color Change Kits are available in White (WH), Ivory (IV), Almond (AL), Light Almond (LTA), Brown (BR), Grey (GR), and Black (BL) colors.
Scene Switches have an integrated infrared sensor and its buttons may be activated by this remote control. This remote control allows the homeowner to activate any button on the room's scene switch or any button on up to three other scene switches in the house.
This remote comes in white.
The Model 38A14-1 Scene Switch Remote Control is used for controlling rooms of HLC lighting by sending infrared (IR) signals to Model 38A00-1 6-Button Scene Switches with IR Receivers. To activate lighting, point the 38A14-1 Remote Control at a 38A00-1 Scene Switch and press the desired buttons. The buttons on the 38A14-1 Remote Control simulate pressing the pushbuttons on the 38A00-1 Scene Switch with IR Receiver. The room can be turned on, turned off, dimmed, brightened, or set to a scene (A-D).
The Model 38A14-1 Scene Switch Remote Control has 4 separate IR codes for each button so that it can be used to control up to 4 Model 38A00-1 Scene Switches with IR Receivers located in the same general area of a room.
The Table Top Scene Switch Cradle is used to table mount the Scene Switch (38A00-1), House Status Switch (38A00-2), or Lumina Mode Switch (38A00-3). You may purchase it in either Black or White and either with or without an HAI Scene Switch.
The Table Top Scene Switch Cradle can be conveniently located throughout the home, including on a bedside nightstand, on the desk in a home office, or next to your favorite chair. It plugs directly into electrical outlet and has a cord length of 6 feet.
The Table Top Scene Switch Cradle may be used in conjunction with an HAI home control system or it may be used to create lighting control in a single room, with no controller and no programming. Just use lamp modules, Scene Switches in Table Top Scene Switch Cradles, and the HLC Scene Switch Remote Control to create standalone lighting control for a room. This stand-alone application is perfect for home theaters, great rooms, master bedrooms & baths, outdoor lighting, and many other possibilities.
The 2400 Watt UPB™ Dimmer Switch is used for controlling and dimming lighting loads up to 2400 Watts. It comes with connectors and instructions.
HAI sells wallplates for this switch. The white Wallplate is HAI Part Number 55A03-1, and the ivory Wallplate is HAI Part Number 55A03-2.
While this switch comes in a default mode of dimming it may be set to non-dimming.
Requirements: Requires a neutral (white) connection wire. If you are using an HAI home control system with your switch you must install a UPB™ PIM & cable (HAI Part Number 36A00-1). If you are using the HAI Upstart Configuration software you must install an UPB™ PIM & cable (HAI Part Number 36A00-1) and a cable to connect your PIM to a computer (HAI Part Number 36A05-2). Recommendation: HAI recommends that every HAI Lighting Control (HLC) installation include a Phase Coupler (HAI Part Number 39A00-1). All HLC products are UL Listed and use Universal Powerline Bus (UPB™) – a digital communications standard for lighting and home control that ensures superior reliability. UPB™ has been extensively tested and researched in residential environments and found to be 99.9 percent reliable. UPB™ works over existing wires in a home and does not require new wiring. The HAI UPB™ 2400W Switch is capable of storing up to 16 preset light levels to create powerful lighting scenes. It is capable of being set to a non-dimming mode (see Configuration Software below) in order to control loads, such as fluorescent lights, that do not belong on a dimming switch. Usage The 2400 Watt UPB™ Dimmer Switch works as a standalone switch or may be used with other HAI Products, including Scene Switches, House Status Switches, and Home Control Systems to provide sophisticated lighting control. Switch LED The 2400W switch comes with equipped with a multi-color LED indicator, which may be set to off, blue, red, or magenta. The default settings are as follows: Switch is off - LED is blue Switch is on - LED is off You may change these default colors by using the HAI UPB™ UPStart configuration software (see below). Colors The switch paddle is not removable for the 2400W switch; accordingly, you must order your desired color. It is available in White (WH) or Ivory (IV) colors. Wallplate No Wallplate is included when you purchase this switch; however, you may purchase a Wallplate cover from HAI. The white Wallplate is HAI Part Number 55A03-1, and the ivory Wallplate is HAI Part Number 55A03-2. Configuration Software When used with an HAI Home Control System HLC products automatically configure themselves, and outside software is not required. HAI offers HAI UPB™ UPStart Configuration software for professionals who desire to make advanced changes to our default setup. HAI UPB™ UPStart configuration software will allow you to change the function of this dimming switch to be non-dimming or vice-versa. This software also allows you to change the colors on the switch's LED and the rate that it brightens to fully on or dims to fully off.
Enter your email for a chance to WIN $100 Amex Gift Card.
Please Enter Your Email Address
*One entry per household please