Home > Shop Brands > Honeywell Security & Communications > Honeywell Wireless Security Products >

  Honeywell 5800C2W Hardwired to 5800 Wireless Converter
Honeywell  5800C2W Hardwired to 5800 Wireless Converter
5800C2W Hardwired to 5800 Wireless Converter


 
5800C2W
   Hardwired to 5800 Wireless
   Converter

Our Price : $80.60

UPC Code: 886618184550

Product Code: 5800C2W

Qty:

Description
 

The Honeywell 5800C2W Hardwired to 5800 Wireless Converter enables retrofitting existing 12-volt security systems by converting their wired sensors to Honeywell’s 5800 Series wireless technology. Its ideal uses are to upgrade hardwired systems to LYNX Touch systems to provide connected home and business functionality, or upgrade to LYNX Plus for traditional security. In addition, it can be used in new construction installations that have been fitted with hardwired systems. Converting existing wired zones to wireless saves on installation cost, time and materials since there is no need to replace wired devices with individual transmitters.

Honeywell’s 5800C2W is simple to install and extremely flexible. It can power wired PIRs, and the included power supply is backed up with a standard, rechargeable battery. One button calibration automatically configures 5800C2W by learning what zones are in use.

Set-up is a three step process:

  1. Mount and wire the module
  2. Calibrate/activate the module zones
  3. Enroll the module’s wireless zones into the control panel
Features
    • Nine hardwired zones with end-of-line
    • resistor protection – use with existing
    • contacts, PIRs, glassbreaks and
    • other 12V sensors

    • – Not for use with fire or heat sensors

    • – It is recommended that any existing
    • smoke, heat or CO detectors be
    • replaced with new Honeywell 5800
    • Series detectors
    • One-button calibration/activation of
    • zone inputs
    • 5800C2W wireless zones enroll
    • in the control panel like any other
    • 5800 Series device
    • 5800 Series serial numbers
    • automatically assigned to
    • activated zones
    • Power supply included to power PIRs
    • – 12V 4AH battery provides four hours
    • of standby

    • – Low battery supervision
    • and notification
    • Case tamper switch
    • Complete supervision of transmitters,
    • zone tampers, low battery
    • Module can be mounted next to
    • the control panel being replaced,
    • or relocated if necessary to maximize
    • wireless range

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Honeywell Security & Communications > Honeywell Wireless Security Products
Shop Brands > Honeywell Security & Communications > Honeywell Wireless Security Products > Accessories
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please