 |
 |
 |
|
Designed to integrate seamlessly with CCTV, access control, and ADEMCO’s full range of fire and burglary components, the NEW VISTA-128FBP provides the ultimate protection of life and property. The UL listed Commercial Fire and Burglary Control Platform controls up to eight partitions, and supports up to 128 zones/points using hardwired, wireless and V-Plex addressable technologies. A diverse line of ADEMCO initiating devices, notification circuits, digital dialers, keypads, RF receivers and relays are supported by extremely powerful control platform. The VISTA-128FBP has been designed to mount quickly and easily in an attack resistant cabinet, and is available in 12V and 24V models. A revolutionary new feature called Panel Linking allows multiple partitions, panels - even buildings to be armed, disarmed and have status checked from one location. FEATURES - Eight hardwired zones standard, expandable to 120 V-Plex addressable points/zones or 128 wireless points/zones
- Can control eight separate areas independently (8 partitions)
- Supports Panel-Linking allows up to 8 systems or buildings to be controlled from one central location (using VA8200)
- Supports commercial UL wireless fire and burg
- Stores up to 512 events and can accommodate 150 user codes
- Supports addressable V-Plex access control points using VistaKey (1 to 8 doors)
- Supports up to 16 doors of access control using Vista Gateway Module (VGM)*
- Supports CCTV applications with the new VistaView-100 CCTV Switcher Module
- Identifies the point or zone of a fire or alarm, using the new FSA-8/FSA-24 Fire System Annunciator
- Programmable to meet SIA false alarm prevention specifications. To meet UL approval forANSI/SIA CP-01-2000 order part number VISTA-128SIA
- Two on-board notification (bell) circuits delivering 2.3 amp @ 12V or 3.4 amp @ 24V
- Automatic smoke detector sensitivity maintenance testing
- 4-wire smoke reset using onboard J2 output trigger
- Supports Dynamic Signaling for LRR
- Supports Remote Control-via the internet**
- Supports Internet Alarm Reporting**
- Supports the new Graphical User Interface Consoles
- Supports up to 250 access card holders using VistaKey
- Supports AlphaNumeric pager up to 8 different numbers using the VA8201
* Connects to Northern Computers Passpoint Access Control Systems. Maximum 32 doors. ** When used with AlarmNet-i ADDITIONAL FEATURES - Notification Appliance Circuits (two):
- Programmable
- Temporal code compliant
- Individually silenceable - Programmable on-board auxiliary relay
- SIA false alarm reduction features:
- Exit error logic
- Exit delay reset
- Cross zoning
- Call waiting defeat
- Recent close report - Supports commercial hardwired, addressable V-Plex polling loop and wireless zones
- Hardwired zones
- Provides eight style B hardwired zones
- EOLR supervised for Fire and UL burglary installations
- Supports N.O or N.C. sensors
- Individually assignable to any eight partition
- Up to 32 two-wire smoke detectors each on zone one and two (64 total)
- Up to 50 two-wire glassbreak detectors on zone eight - Patented addressable V-Plex polling loop technology
- Supports 120 two-wire zones points
- Global polling technology for faster processing
- Increased current draw capacity (128mA)
- Supervised by panel
- Individually assignable to partitions, notification circuit (bell) output or aux relay
- 4,000 ft capability without the use of shielded cable
- Extender/Isolation bus module
- Two-wire smoke detector zone/group expansion module adds two or four zones
- Eight zone - Class A and B extender module
- Eight zone - Class B extender module
- One zone supervised contact monitor module - UL Listed wireless expansion
- Supports up to 128 wireless zones/points using 5881ENHC receiver
- Supervised by control for check-in signals
- Tamper protection for transmitters
- Individually assignable up to eight partitions
- Supports UL864/NFPA approved wireless smoke detectors - Access Control integration
- Full integration with PassPoint Access Control System Complete Gateway interface of VISTA and access functions - Up to 8 doors using VistaKey V-Plex Access Control
- Event reporting
- Local printer of access or VISTA related event
- Scheduled uploading of events to central station
- Stored events for one call retrieval
- Communication
- Phone mapping by zone response type
- Supports VIP interactive phone voice module
- Panel operation during download
- Uploading equipment list to central station
- Communication to PassPoint via Vista Gateway Module - CCTV integration
- Supports VistaView-100 ECP based CCTV switchers APPLICATIONS
The VISTA-128FBP control is well suited for a variety of applications as an integrated fire and burglary control. A diverse line of ADEMCO initiating devices supports this extremely powerful control. Some of the applications supported are: medical and professional buildings, churches or synagogues, office buildings, schools, strip malls, larger residences and factory or warehouse environments.
Installation
The VISTA-128FBP alarm system has been designed to mount both quickly and easily. It meets all applicable requirements for UL commercial fire and burglary installations.
|
|
|
 |
|
 |
|
|
| Accessory or Possible Replacement |
|
|
|
|
