You are here: Home > Shop Brands > Honeywell Security & Communications > Honeywell Control Panels
We found 17 results matching your criteria.

McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

Honeywell Control Panels

  Ademco Vista Panels by Honeywell
  Combination Fire / Burglary Panels
  Entry Management Systems
  Honeywell Wireless Burglary Control Panels & Accessories
  Software
Honeywell Security's innovative line of control panels provide you with more of what you wantthe power, capacity and versatility to satisfy virtually any installation requirement from a single platform.
Ademco Vista Panels by Honeywell
Ademco Vista Panels by Honeywell
Combination Fire / Burglary Panels
Combination Fire / Burglary Panels
Entry Management Systems
Honeywell's entry management systems let you quickly and easily add access control every time you install a compatible VISTA commercial security system.
Honeywell Wireless Burglary Control Panels & Accessories
Wireless Burglary Control Panels & Accessories
Software
Downloader software that allows the user to access, program and control any Honeywell's security systems.
Sort By:
Page of 2
Ademco / Honeywell 4110XM - Entry Level Universal Control Ademco / Honeywell  VISTA-20PUL - Commercial Burglary Alarm Control Panel - VISTA20PUL
Features:
  • 6 programmable zones, 3 keypad zone, plus duress
  • Zone 5 can be supervised fire using four-wire smoke detectors
  • End of line resistor supervision on all zones for normally open or closed contacts
  • Normal response, 400 msec, on all zones, one zone can be 10 msec.
  • Zone types: entry/exit, perimeter, interior follower, day trouble/night alarm, 24 hour silent panic, 24 hour audible panic, 24 hour auxiliary, fire, with and without timeout
  • Interior zone bypassed with STAY and INSTANT functions
  • Zone restore reporting at sounder time-out if zone restored or at next system disarming

Valuable End-User Features:

  • Audible Exit Warning
  • All keypads have an English lan guage display and a 4-wire con nection to the control.
  • Keyswitch arming with status indication and tamper protection
  • Test mode checks sounder, generates communicator test report; System can be walk tested
  • 7 user codes consisting of 1 master code and 6 secondary codes
  • Swinger suppression - 10 maximum number of alarms and trouble reports permitted per armed period or unlimited
  • Individual bypass by zone
  • Forced Bypass - single bypass entry for all zones that are faulted
  • Fire alarm sounding turned off by single entry of OFF key
  • Chime mode on entry/exit and perimeter zones
  • Quick arming requires only a 2 key entry for an arming mode, if enabled. Reports as User 0
  • Interior zone bypassed with STAY and INSTANT arming
  • INSTANT and MAXIMUM mode cancels entry delay
  • Entry delay eliminated with MAXIMUM arming with interior protection on
  • Three keypad activated panic zone
  • Entry time: 0, 20, 30 or 45, 60, 90 seconds
  • Exit time: Entry time plus 15 seconds
  • Alarm cut-off time: 4, 8, 12, 16 minutes or no time-out
  • Extra large cabinet with removable door for wiring ease

Security Dealer Features:

  • Built-in alarm relay, SPST: steady output for burglary/audible emergency and pulsed for fire
  • Pre-alarm, trouble and alert sounder built-in into keypads

SPECIFICATIONS:

Communication:

  • Split/Dual Reporting
  • Daily, Weekly or Monthly test
  • Touchtone or pulse dial
  • Formats:
    - Honeywell contact ID
    - Honeywell 4+2 Express: 10 characters/sec. DTMF (Touchtone) data tone, 1400/2300 Hz ACK, 1400 Hz kissoff, checksum verification
    - Honeywell Low Speed: 10 pulses/sec, 1900 Hz data tone, 1400 Hz ACK/kissoff
    - Radionics: 20 pulses per second, 1800 Hz data tone, 2300 Hz ACK/kissoff
  • 3+1, 4+1, and 4+2 reporting in slow speed formats
  • Dual telephone numbers
  • Back-up reporting: 8 attempts made to primary and another 8 attempts to secondary telephone number
  • Expanded reporting:
    - alarms, restorals, bypasses and trouble by zone; open/close by user
  • Hexadecimal reporting
  • 4-digit PABX code and 12-digit telephone number
  • True dial tone detection
  • Double pole line seizure
  • Communication delayed for 15 seconds on burglary zone (not panic or fire zones) if selected
  • Control low battery report when battery reaches 11.2 -11.6 volts
  • AC power loss report

Electrical:

  • Bell Supervision
  • Auxiliary current: 500 mA, 12VDC, current limited
  • Low battery shutdown: 9.8 - 10.5 volts
  • Transformer: 16.5VAC, 25VA (Ademco No. 1321/TF2)
  • Standby time: 7 hours with 400mA auxiliary load using a 12 volt, 4 Ah battery
  • Battery charging voltage: 13.8 VDC
  • Alarm current: 2.0 amps, 12VDC fuse protected

Programming:

  • Programmable through keypad in non-volatile EEROM memory
  • Site initiated or remote download from an IBM compatible PC, Compass and CIA modem
  • Account takeover protection prevents unauthorized takeover of your accounts
  • Downloading security with: security code handshake, data encryption, operator access levels to files and functions, date/time stamping with operator ID
  • Remote download capabilities: Change user codes Enter new program Upload resident control program

Accessories:

  • CE2X - LX2 -Code Encryptor LX2

Keypads:

  • 6150 Fixed English LCD 85mA/40mA
  • 6148 Fixed English LCD 70mA/30mA

Agency Listings:

  • UL Residential Fire, Burglary and CSFM
Honeywell’s high capacity, feature-rich VISTA-20PUL is a UL Listed, economical control/communicator that supports up to48 zones of protection using basic hardwired, wired expansion, and/or wireless zones.

The VISTA-20PUL also includes Ethernet uploading and downloading capability for Internet and Intranet use via Honeywell’s 7845i or 7845i-ENTcommunications products. The panel’s installation advantages,appealing end-user benefits and robust system capacity make the value-priced VISTA-20PUL an ideal choice for light commercial applications.

  • Ethernet uploading and downloading capability for Internet and Intranet use via 7845i or 7845i-ENT
  • Supports four graphic touchscreen keypads
  • Wireless keys can be programmed without using zones
  • Eight on-board hardwired zones standard (15 when Zone Doublingfeature is used)
    – 40 hardwired expansion zones
    – 40 wireless expansion zones
  • Two low current on-board trigger outputs
  • 100 Event Log viewable at system keypads with time/date stamp
  • 48 system user codes assignable to either partition
  • Expandable to 48 total zones when used with hardwired and/or wirelessexpansion modules
  • Two independent partitions plus a common partition – Global Arming from any system keypad
    – Goto function to view or operate one partition from the other
    – Separate partition account numbers
  • 16 output devices
    – Relays (Model 4204 RelayModules, or 4229 ExpansionModule), and/or
    – X-10 devices (when used with a 4300 Transformer)
  • Four installer configurable zone types allows the installer to create custom zone types by assigning all zone attributes
  • Supports four-wire, and up to 16 two-wire smokes
    – Works with Sentrol CleanMe maintenance signal
  • Multiple actions on output devicesdepending on system “state”
    – Turns lights off when system arms
    – Turns the same light on when system disarms
    – Flashes same lights when system is in alarm condition
  • Built-in phone line cut monitor with programmable delay and annunciation options
    – Display on system keypads
    – Trigger local sounders
    – Trigger system bell

    Security Dealer Features Automatic System Load Shed
    – During extended AC power fail, the system battery will be disconnected to prevent irreversible battery failure. Reduces service calls to replace batteries Dynamic Signaling
    – Reduces redundant reporting tothe central station when multiple reporting methods are used; i.e.digital dialer and AlarmNet radio The VISTA-20PUL complies to the following listings (listed at UL as VISTA 20P & UL-KT):

    US Standards: UL LISTINGS
    UL 985 - Household Fire Warning System Units
    UL 1023 - Household Burglar-Alarm System Units
    UL 609 - Local Burglar Alarm Units and Systems
    UL 365 - Police Station Connected Burglar Alarm Units and Systems
    UL 1610 - Central Station burglar Alarm Units
    UL 1635 - Digital Alarm Communicator System Units

    Canadian Standards: CUL LISTINGS
    CAN/ULC-S303-M91-STANDARD for Local Burglar Alarm Units and Systems.
    ULC Subject C1023-Standard for Household Burglar Alarm System Units.
    CAN/ULC-S545-M89-Standard for Residential Fire Warning System Control Units.
    CAN/ULC-S304-M88-Standard for Central and Monitoring Station Burglar Alarm Units.
    Canadian Electrical Code, Part I.


    Electrical Specifications:

  • Aux. power: 12VDC, 600mA maximum
  • Seven hour standby at 400mA aux. load with four amp hour battery
  • 16.5VAC/25VA transformer
  • Alarm output: 12VDC, 2.0 amps max.
    - For UL listed installations, combined aux. and alarm output cannot exceed 700mA

    Output Control:
  • Supports up to four relay boards (up to 16 relays)
  • Optional X-10 transformer/interface (part no. 4300) may be used to control up to 16 X-10 receiving devices

    Zones:
  • Eight hardwired zones (15 with zone doubling)
  • Selectable response: 10msec, 350msec, 750msec
  • Assignable to any partition
  • 20 selectable zone types plus four configurable zone types
  • Programmable swinger suppression

    Expansion Devices:
  • 4219 – Eight hardwired zones – 16mA
  • 4204
    - Up to four relays
    - 15mA standby (each active relay draws an additional 40mA)
  • 4229 – Eight hardwired zones and two relays – 36mA (each active relay draws an additional 40mA)

    Accessories:
  • 7845i Internet Communicator
  • 7845i-ENT Enterprise Internet Communicator
  • 4286 VIP Voice Module
    - 220mA
  • 5881ENL supports up to eight zones
    - 60mA, 5881ENM supports up to 16 zones
    - 5881ENH supports up to 48 zones
    - 50mA
  • 5883 Transceiver supports up to 40 zones
    - 80mA
  • Supports Eagle 1225 and 1221 boards

    Keypads:
  • 6160 Custom Alpha (required for programming)
    - 100mA
  • 6160V Custom Alpha Voice
    - 100mA
  • 6150 Fixed English LCD
    - 85mA/40mA
  • 6150V Fixed English Voice LCD
    - 85mA/40mA
  • 6150RF Fixed English RF LCD
    - 85mA/40mA
  • 6148 Fixed English LCD
    - 70mA/30mA
  • 6270 Graphic Touchscreen
  • 8132 Advanced User Interface

    Smoke Detectors:
  • Supports up to 16 two-wire smoke detectors
  • Supports four-wire smoke detectors

    Agency Listings:
  • UL Residential Fire, Burglary and CSFM
  • UL 985 - Residential Household Fire Warning System Units
  • UL 1023 - Residential Household Burglar Alarm System Units
  • UL 609 - Local Burglar Alarm Units and Systems
  • UL 365 - Commercial Police Station Connected Burglar Alarm Units and Systems
  • UL 1610 - Commercial Central Station Burglar Alarm Units

    Communications:
  • 7845i Internet Communicator
  • 7845i-ENT Enterprise Internet Communicator
  • Touchtone or pulse
  • Formats supported: ADEMCO Contact ID , ADEMCO 4 + 2 Express , ADEMCO low speed , Sescoa/Radionics
  • 3 + 1, 4 + 1 and 4 + 2 reporting
  • Reporting capabilities: Split , Dual , Split/Dual - True dial tone detection
  • Low battery reports 11.2
    - 11.6VDC
  • AC loss and restoral reporting supported
  • Ademco / Honeywell VISTA-21iP - Control Panel - VISTA21iP Ademco / Honeywell VISTA-GSM - Optional Snap-in Radio Module for Vista-21ip - VISTAGSM
    Honeywell’s high capacity, feature-rich VISTA-21iP lets you deliver more value to your customers on each and every sale. The VISTA-21iP provides up to 48 zones of protection, an on-board IP connection, graphic keypad support and dual partitions. The VISTA-21iP gives you the ability to send alarm signals and upload/download via an Internet Protocol (IP), improving the speed at which information can be delivered to and from the control panel. When used with an optional AlarmNet GSM that snaps right on the board, the VISTA-21iP can be installed in premises without TELCO lines – guaranteeing communication independent of any infrastructure. The panel’s installation advantages, innovative end-user benefits and robust system capacity make the value-priced VISTA-21iP an ideal choice for higher-end installations.

    Features:
  • Internet alarm reporting and uploading/downloading capability via on-board AlarmNet Internet Communicator
  • Supports four graphic touchscreen keypads
  • Wireless keys can be programmed without using zones
  • Eight on-board hardwired zones standard (15 when Zone Doubling feature is used)
    – 40 hardwired expansion zones
    – 40 wireless expansion zones
  • Two low current on-board trigger outputs
  • 100 Event Log viewable at system keypads with time/date stamp
  • 48 system user codes assignable to either partition
  • Expandable to 48 total zones when used with hardwired and/or wireless expansion modules
  • Two independent partitions plus a common partition
    – Global arming from any system keypad
    – Goto function to view or operate one partition from the other
    – Separate partition account numbers
  • 16 output devices
    – Relays (Model 4204 Relay Modules, or 4229 Expansion Module), and/or X-10® devices (when used with a 4300 Transformer)
  • Four installer-configurable zone types allows the installer to create custom zone types by assigning all zone attributes
  • Supports four-wire, and up to 16 two-wire smokes
    – Works with Sentrol CleanMe™ maintenance signal
  • Multiple actions on output devices depending on system state
    – Turns lights off when system arms
    – Turns the same light on when system disarms
    – Flashes same lights when system is in alarm
  • Built-in phone line cut monitor with programmable delay and annunciation options
    – Display on system keypads
    – Trigger local sounders
    – Trigger system bell Security Dealer Features
  • Automatic System Load Shed
    – During extended AC power fail, the system battery will be disconnected to prevent irreversible battery failure. Reduces service calls to replace batteries.
  • Dynamic Signaling
    – Reduces redundant reporting to the central station when multiple reporting methods are used; i.e. digital dialer and AlarmNet radio Valuable End-User Features
  • Viewable on system keypads:
    – Exit countdown
    – Time and date display*
    – Event log*
  • Auto keypad backlighting on entry
  • Keyswitch arming
  • Programmable macro buttons and single-button arming
  • Supports a variety of wireless remote controls for single-button operation
  • User Scheduling
    – Automatically activates X-10 and relays at programmed times
    – Latchkey reports to pagers
    – Auto arm/disarm
    – “User access” time windows
  • Supports up to four end-user numeric pagers
  • VIP Module allows system control from any touchtone phone
  • Chime by zone

    *Requires custom alpha keypad

  • Electrical Specifications:
  • Aux. power: 12VDC, 600mA maximum
  • Seven hour standby at 400mA aux. load with four amp hour battery
  • 16.5VAC/40VA transformer
  • Alarm output: 12VDC, 2.0 amps max.
    – For agency listed installations, combined aux. and alarm output cannot exceed 700mA
    Output Control:
  • Supports up to four relay boards (up to 16 relays)
  • Optional X-10 transformer/interface (part no. 4300) may be used to control up to 16 X-10 receiving devices

    Zones:
  • Eight hardwired zones (15 with zone doubling)
  • Selectable response: 10msec, 350msec, 750msec
  • Assignable to any partition
  • 20 selectable zone types plus four configurable zone types
  • Programmable swinger suppression

    Expansion Devices:
  • 4219 – Eight hardwired zones – 16mA-->
  • 4204 – Up to four relays – 15mA standby (each active relay draws an additional 40mA)
  • 4229 – Eight hardwired zones and two relays – 36mA (each active relay draws an additional 40mA)

    Accessories:
  • VISTA-GSM Snap-in Dual-Path Digital Wireless Communicator (IP required for activation and registration)
  • 4286 VIP Voice Module – 220mA
  • 5881ENL RF Receiver supports up to eight zones – 60mA
  • 5881ENM supports up to 16 zones – 50mA
  • 5881ENH up to 48 zones – 50mA
  • 5883H High Security Transceiver Module supports up to 48 zones – 80mA
  • Supports Eagle 1225 and 1221 boards

    Keypads:
  • 6160 Custom Alpha (required for programming) – 100mA
  • 6160V Custom Alpha Voice – 100mA
  • 6150 Fixed English LCD – 85mA/40mA
  • 6150V Fixed English Voice LCD – 85mA/40mA
  • 6150RF Fixed English RF LCD – 85mA/40mA
  • 6148 Fixed English LCD – 70mA/30mA
  • 6270 Graphic Touchscreen User Interface
  • 6271C Color Graphic Touchscreen User Interface
  • 6271CV Color Graphic Touchscreen User Interface with Voice
  • 8132 Symphony Advanced User Interface

    Agency Listings:
    ETL listing:
  • Residential Fire and Burglary:
    – Household Fire Warning System Units – ANSI/UL 985, 2000/05/26 (5th edition) with revisions up to 2004/04/29
    – Standard for Safety for Digital Alarm Communicator System Units – ANSI/UL 1635, 1996 (3rd edition)
    – Safety of Household Burglar Alarm System Units, ANSI/UL 1023, issued 1996/11/25 (6th edition) with revisions up to 12/30/04
  • Commercial Burglary:
    – Standard for Safety for Police Station Connected Burglar Alarm Units and Systems – ANSI/UL 365 (4th edition), issued 1997/01/31 with revisions up to 2005/03/08
    – Standard for Safety Local Burglar Alarm Units and Systems – UL 609 (11th edition), issued1996/08/28 with revisions up to 2005/03/17
    – Standard for Safety Central Station Burglar Alarm Units – ANSI/UL 1610 (3rd edition), issued 1998/10/26 with revisions up to 2005/08/16

    Communications:
  • VISTA-GSM Snap-in Dual-Path Digital Wireless Communicator (IP required for activation and registration)
  • Touchtone or pulse standard TELCO dialers
  • Formats supported:
    – ADEMCO Contact ID
    – ADEMCO 4 + 2 Express
    – ADEMCO low speed
    – Sescoa/Radionics
  • 3 + 1, 4 + 1 and 4 + 2 reporting
  • Reporting capabilities: Split, Dual, Split/Dual, True dial tone detection
  • Low battery reports: 11.2 – 11.6VDC
  • AC loss and restoral reporting supported
  • Optional Snap-in Radio Module for Vista-21ip.

    GSM (Global System for Mobile) digital cellular communicator that delivers secure, reliable and complementary digital communications via the GSM network. This ground-breaking communications solution offers full alarm data reporting and uploading/downloading when used with VISTA.

    The VISTA-GSM is a perfect solution for customers that require alternative communications to traditional telephone lines in their homes or businesses and want to take advantage of the quick installation and powerful end-user features of the VISTA.

    Radio Features:

    • Full Contact ID or ADEMCO High-Speed Reporting format
    • 256-bit AES Encryption–Advanced encryption standard used for secure communications
    • Dual-Path Technology–Uses GPRS (General Packet Radio Service) as primary digital cellular path and automatically switches to SMS (Short Message Service) if GPRS is unavailable
    • Upload/Download–Requires Compass version 1.5.8.54a or higher
    • Dynamic Signaling—Provides management of control panel dialer and digital cellular communicator
    • Diagnostic LEDs–Provide signal strength and status indications
    • QOS–Quality of Service diagnostics via AlarmNet supply vital information including when message was received, battery voltage, input voltage, signal strength and message path
    • Web-Based Programming–Allows complete interactive programming from AlarmNet Direct: https://services.alarmnet.com/Alarm netDirect.
    • Intelligent Supervision–Use of any message generated as supervision message per optional 24-hour or 30-day intervals. This feature effectively limits required messages to be sent.
    Ademco / Honeywell 4110XM - Entry Level Universal Control Honeywell 6280W White Color Graphic Touchscreen Keypad with Voice

    The industry’s most economical six-zone control panel, Honeywell’s 4110XM provides excellent coverage for fire, burglary and emergency situations. It is an ideal entry-level panel for residential applications, including new builder markets.

    Features

    • Six programmable zones, three keypad zone, plus duress
    • Zone 5 can be supervised fire using four-wire smoke detectors
    • End of line resistor supervision on all zones for normally open or closed contacts
    • Normal response, 400 msec, on all zones, one zone can be 10 msec.
    • Zone types: entry/exit, perimeter, interior follower, day trouble/night alarm, 24-hour silent panic, 24-hour audible panic, 24-hour auxiliary, fire, with and without timeout
    • Interior zone bypassed with STAY and INSTANT functions
    • Zone restore reporting at sounder time-out if zone restored or at next system disarming

    Valuable End-User Features

    • Audible Exit Warning
    • All keypads have an English language display and a four-wire connection to the control
    • Keyswitch arming with status indication and tamper protection
    • Test mode checks sounder, generates communicator test report; System can be walk tested
    • Seven user codes consisting of one master code and six secondary codes
    • Swinger suppression - ten maximum number of alarms and trouble reports permitted per armed period or unlimited
    • Individual bypass by zone
    • Forced Bypass - single bypass entry for all zones that are faulted
    • Fire alarm sounding turned off by single entry of OFF key
    • Chime mode on entry/exit and perimeter zones
    • Quick arming requires only a two-key entry for an arming mode, if enabled. Reports as User 0.
    • Interior zone bypassed with STAY and INSTANT arming
    • INSTANT and MAXIMUM mode cancels entry delay
    • Entry delay eliminated with MAXIMUM arming with interior protection on
    • Three keypad activated panic zone
    • Entry time: 0, 20, 30 or 45, 60, 90 seconds
    • Exit time: Entry time plus 15 seconds
    • Alarm cut-off time: 4, 8, 12, 16 minutes or no time-out
    • Extra large cabinet with removable door for wiring ease

    Security Dealer Features

    • Built-in alarm relay, SPST: steady output for burglary/audible emergency and pulsed for fire
    • Pre-alarm, trouble and alert sounder built into keypads

    Honeywell's feature-rich 6280 Color Graphic Voice Touchscreen Keypad family gives you the opportunity to close more sales, increase retention and capture new markets.* They feature a high-resolution 7" widescreen TFT display that doubles as a digital picture frame. There is a choice of silver and white color schemes, three language options and voice annunciation of alarm conditions. The new intuitive user interface features icons and menus that make system operation easy to navigate. The 6280 uses the same icons as Total ConnectTM 2.0, helping to reduce end-user training and costly false alarms.

    The digital picture frame and video viewer features let end-users create slideshows and view home movies on the brilliant, high resolution TFT display. Homeowners can customize the slideshow with family photos, vacation pictures and more.

    The choice of two color housings and three languages (ideal for homes with multilingual members) opens up new opportunities and markets that previously were untapped. Silver blends perfectly in stainless steel kitchens and garages. White, a popular classic choice, blends seamlessly with lighter décors.

    To help you close more sales, Honeywell has created a handheld demo (6280WHD) that includes a sales informercial video that highlights the features and end-user benefits of the 6280. The video can be played by simply pressing a button.

    *Voice annunciation option in English only.

    Features

    • High-resolution, 7" widescreen 640 x 480 TFT display
    • 16 million colors capability to display vivid images
    • Intuitive touchscreen display with icons and menu driven prompts (English only)
    • Digital picture frame, slideshow or home movies through standard SD card
    • Available in two colors
      - Silver: Ideal for kitchens with stainless steel appliances, garages and basements
      - White: Blends seamlessly with most lighter décors
    • Three languages can be displayed
      - English
      - Spanish (Latin American)
      - French Canadian
    • Voice annunciation of type and location of alarm (English only)
    • Family message center that lets end-users record and playback messages
    • Entry/Exit countdown displayed
    • Authorized end-user can easily add or delete user codes
    • View zone lists with status
    • End-user can quickly and easily bypass zones
    • Embedded infomercial video in keypad to help in the sales process
    Honeywell Ademco GSMVLP Digital Cellular Communicator for Lynx Plus Honeywell Ademco V10RFATPK-KT VISTA-10P Control Panel & 6150RF Keypad/Receiver Attack Pack

    The GSMVLP is an optional communication module intended for use with Lynx Plus Series Series controls, and provides wireless communication with the AlarmNet network for backup delivery of alarm and other messages to the monitoring central station. It also supports voice communications between the control panel and the Central Station.

    This communication module transmits signals via the AlarmNet-G network (GSM cellular network), using GPRS and forwards them to your Central Station. If the GPRS network is unavailable, the GSMVLP will attempt to send the transmission via SMS.
    VISTA-10P  EXPAND,6ZONE,PLUS,SERIES  & 6150RF  FIXED ENGLISH INTEGRATED KEYPAD  Attack Pack along with: 2 x 5816  DOOR/WINDOW TRANSMITTER  and 1 x 5800PIR-RES  WIRELESS PIR,RESIDENTIAL  and 1 x WAVE2  SIREN/2 TONE/ INDOOR and 1 x 467  12V4.0AH LEAD ACID RECHARG BAT 1
    VISTA-250BPE 	Enhanced Commercial Burglary Alarm Control Panel (ETL Listed as VISTA-250BP Rev. 4, UL Pending) Honeywell GSMV4G 	Digital Cellular Communicator with Two-way Voice Transport Capability

    The VISTA-250BPE is a powerful member of the Honeywell family of commercial alarm panels, integrating burglary, CCTV and access control functions. Many features are available that extend the applications of the VISTA-250BP while simplifying end-user operation.

    The VISTA-250BP and VISTA-250BPE (VISTA-250BP Rev. 4) are listed for residential burglary, residential fire and commercial burglary applications (see agency listings in this document for more details). They are compatible with a wide range of AlarmNet communications products for alarm reporting, uploading/downloading and remote services.

    Standard features (VISTA-250BP and VISTA-250BPE):

    • Provides nine onboard style-B hardwired zones
    • Supports up to 241 additional zones using a built-in polling (multiplex) loop interface
    • Supports up to 249 wireless zones using up to two 5800 series wireless receivers (fewer if using hardwired and/or polling loop zones)
    • Provides 1 power-limited bell circuit delivering 1.7Amp (max) at 12Vdc
    • Provides the ability to control eight separate partitions independently, each functioning as if it had its own separate control
    • Accommodates 250 user codes with seven authority levels per partition
    • Accommodates 32 keypad macro commands per system
    • Keeps a log of up to 1,000 events
    • Optiflex CCTV support
    • Supports up to 16 two-wire smoke detectors on zone 1
    • Supports up to 50 latching-type glassbreak detectors on zone 8
    • Zone 7 may be used for keyswitch arming/disarming
    • Supports V-Plex® addressable VISTAKEY access control (up to 15 doors and 500 cards)
    • Supports up to 96 programmable outputs
    • Panel linking up to eight panels
    • Supports eight numeric pager numbers
    • Supports touchscreen Advanced User Interface (AUI)
    • Smoke detector reset at keypad
    • Quick exit
    • Group bypass
    • Arm faulted
    • Event arming
    • Scheduled check-in
    • Arm stay by group

    Enhanced features (VISTA-250BPE only):

    • Carbon monoxide (CO) zone type support
    • Expanded RS-232 capability for third party interface and automation
    • Internet upload/download over AlarmNet GSM, iGSM and IP communicators over the panel's keypad (ECP) bus
    • Ringback support for AlarmNet communicators (confirmation of closing report)
    • 24-hour dialer test support for AlarmNet devices

    Honeywell is focused on providing the best alarm communication solutions for the security industry. Alternative communication methods are critical in the marketplace due to VoIP, migration from POTS and global growth of digital networks.

    Transmission Protocols
    Honeywell’s IntelliPath Series communicators provide seamless, reliable coverage by automatically choosing the best signal in the area (whether 2G, 3G or 4G) and self-adjusting as necessary.

    The following wireless communication protocols are supported:
    HSPA+ (4G )
    HSPA (HSDPA & HSUPA) (3G)
    EDGE (2G)
    GPRS (2G)

    This groundbreaking communications solution offers full data reporting and uploading/downloading with most Honeywell control panels. In addition, with onboard zone inputs and optional dialer capture capability, we’re compatible with other manufacturers’ security panels as well. Honeywell communication products and control panels combine to make installations faster and easier.

    All signals are delivered to Honeywell’s AlarmNet® Network Control Center, which routes the information to the appropriate central station. The state-of-the-art AlarmNet Network Control Center is fully redundant and monitored 24/7. AlarmNet has the ability to route messages using AlarmNet-i and 800 PLUS services, providing true redundancy and multi-path message delivery

    Features
    • Multi-GSM platform compability —2G, 3G and 4G
    • Automatic selection of the best available GSM network
    • 4G capable using HSPA+ protocol
    • Full Contact ID or ADEMCO® High-Speed Reporting
      Contact ID reporting using ECP mode with compatible Honeywell control panels or combined with optional dialer capture for non-ECP capable control panels.
    • 256-bit AES Encryption
      Advanced encryption standard used for secure communications.
    • Upload/Download
      Available with select Honeywell control panels. Requires Compass version 1.5.8.54a or higher.
    • Integration
      Quick and easy installation of GSM for VISTA® and LYNX controls.
    • Dynamic Signaling with Certain Honeywell Control Panels
      Provides management of control panel dialer and digital cellular communicator. Programmable priority and delays determine signal path.
    • Diagnostic LEDs
      Provide signal strength and status indications.
    • QOS
      Quality of Service diagnostics via AlarmNet supply vital information including when a message was received, battery voltage, input voltage, signal strength and message path.
    • Web-Based Programming
      Allows complete interactive programming from AlarmNet Direct. https://services.alarmnet.com /AlarmnetDirect
    • Intelligent Supervision
      Any message generated serves as a supervision message per optional 24 hour or 30 day intervals. This feature effectively limits required messages to be sent.
    • Remote Services Capability*
      Optional Honeywell Total Connect Remote Services value-added web-based or SMS system control as well as e-mail notification of system events.
    • Two-way Voice Transport
      GSM voice channel capable to allow two-way voice session in conjunction with an audio verification system (GSMX4G/iGSMV4G/GSMV4G/ VISTA-GSM4G).
    • Line Security
      Approved for line security applications with 200-second supervision intervals (iGSMHS4G).

    *Service subscription required.

    Honeywell GSMVLP5-4G Internal GSM Radio with Two-Way Voice Support Honeywell GSMX4G 	Digital Cellular Communicator for VISTA Control Panels
    Honeywell GSMVLP5-4G Internal GSM Radio with Two-Way Voice Support - Honeywell Lynx Touch 4G Digital Cellular Communicator

    The GSMVLP5-4G is an optional communication module intended for use with Lynx Touch Wireless Alarm Kit controls, and provides wireless communication with the AlarmNet network for backup delivery of alarm and other messages to the monitoring central station. It also supports voice communications between the control panel and the Central Station. This communication module transmits signals via the AlarmNet-G network (GSM cellular network), using GPRS and forwards them to your Central Station. If the GPRS network is unavailable, the GSMVLP5-4G will attempt to send the transmission via SMS.

    Honeywell is focused on providing the best alarm communication solutions for the security industry. Alternative communication methods are critical in the marketplace due to VoIP, migration from POTS and global growth of digital networks.

    Transmission Protocols
    Honeywell’s IntelliPath Series communicators provide seamless, reliable coverage by automatically choosing the best signal in the area (whether 2G, 3G or 4G) and self-adjusting as necessary.

    The following wireless communication protocols are supported:
    HSPA+ (4G )
    HSPA (HSDPA & HSUPA) (3G)
    EDGE (2G)
    GPRS (2G)

    This groundbreaking communications solution offers full data reporting and uploading/downloading with most Honeywell control panels. In addition, with onboard zone inputs and optional dialer capture capability, we’re compatible with other manufacturers’ security panels as well. Honeywell communication products and control panels combine to make installations faster and easier.

    All signals are delivered to Honeywell’s AlarmNet® Network Control Center, which routes the information to the appropriate central station. The state-of-the-art AlarmNet Network Control Center is fully redundant and monitored 24/7. AlarmNet has the ability to route messages using AlarmNet-i and 800 PLUS services, providing true redundancy and multi-path message delivery

    Features
    • Multi-GSM platform compability —2G, 3G and 4G
    • Automatic selection of the best available GSM network
    • 4G capable using HSPA+ protocol
    • Full Contact ID or ADEMCO® High-Speed Reporting
      Contact ID reporting using ECP mode with compatible Honeywell control panels or combined with optional dialer capture for non-ECP capable control panels.
    • 256-bit AES Encryption
      Advanced encryption standard used for secure communications.
    • Upload/Download
      Available with select Honeywell control panels. Requires Compass version 1.5.8.54a or higher.
    • Integration
      Quick and easy installation of GSM for VISTA® and LYNX controls.
    • Dynamic Signaling with Certain Honeywell Control Panels
      Provides management of control panel dialer and digital cellular communicator. Programmable priority and delays determine signal path.
    • Diagnostic LEDs
      Provide signal strength and status indications.
    • QOS
      Quality of Service diagnostics via AlarmNet supply vital information including when a message was received, battery voltage, input voltage, signal strength and message path.
    • Web-Based Programming
      Allows complete interactive programming from AlarmNet Direct. https://services.alarmnet.com /AlarmnetDirect
    • Intelligent Supervision
      Any message generated serves as a supervision message per optional 24 hour or 30 day intervals. This feature effectively limits required messages to be sent.
    • Remote Services Capability*
      Optional Honeywell Total Connect Remote Services value-added web-based or SMS system control as well as e-mail notification of system events.
    • Two-way Voice Transport
      GSM voice channel capable to allow two-way voice session in conjunction with an audio verification system (GSMX4G/iGSMV4G/GSMV4G/ VISTA-GSM4G).
    • Line Security
      Approved for line security applications with 200-second supervision intervals (iGSMHS4G).

    *Service subscription required.

       
     
    Honeywell Security's innovative line of control panels provide you with more of what you want the power, capacity and versatility to satisfy virtually any installation requirement from a single platform.
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please