This Stand Alone Reader is compatible with all 26-bit HID proximity cards or keytags.
It can also enroll most OEM or Corporate 1000 format cards and keytags up to 37-bits. This built-in keypad allows programming and PIN entry. EntryProx also features a detachable antenna module that can be mounted up to 10' away from the control unit. The attractive durable unit can be mounted indoors or outdoors.
Wiegand output mode for use with an access control panel Specifications
ENPROX-KIT1 EntryProx Stand-Alone Reader with 10 key tags
Dimensions
5.25" x 2.75" x 1.375" (13.33 cm x 6.98 cm x 3.49 cm)
Power Supply
10 VDC to 15 VDC, reverse voltage protected linear supply recommended, 150 mA at 12 VDC
Relay Outputs
Strike Relay Form C, switches up to 4 A at 30 VDC AUX Relay Form C, switches up to 1 A at 30 VDC
Monitor Inputs
Door Position N.O. (normally open) dry contact Request to Exit N.O. (normally open) dry contact
LED
Bi-color red and green, amber, Infrared (used with optional hand-held printer-ENPROX-PRN)
Operation
Strike Time 1-99 seconds (adjustable) Strike Mode Access Timer or Toggle/Latch Door Ajar Time 10-990 Seconds (adjustable)
Operating Temperature
-22 to 150° F (-30 to 65° C)
Operating Humidity
5% to 95% relative humidity non-condensing
Cable Distance
(Recommended cable is NC1861-BL-500, 6-conductor stranded with overall shield or equivalent) Remote Reader Module 10' (3 m) Wiegand Interface 500' (152 m)
