Home > Shop Brands > Honeywell Power Products > Access Control Power Supplies >

 

Honeywell HP400ULPD16CB 4A 12VDC or 3A 24VDC PS w/2 HPD8CB Distribution Boards & Encl



Honeywell HP400ULPD16CB 4A 12VDC or 3A 24VDC PS w/2 HPD8CB Distribution Boards & Encl


 

Our Price : $271.39


Product Code: 498168

Qty:

Description
 
The HPACM4 and HPACM8 convert 1 12VDC or /24 VAC/VDC input to 4 or 8 independently controlled power-limited PTC Protected outputs. The modules accept inputs from open collector sink or Normally Open (NO) dry contacts from UL listed security devices such as keypads, card readers, access control systems, PIRs and Push Button Delays.

Specifications

Power Supply Board

  • Input voltage: 120VAC 60Hz; Current: 2.50A max.
  • Output Voltage: 12VDC or 24VDC, jumper selectable; Current: 4.0A continuous output maximum, 3.5A plus battery charger (DC output not supervised).
  • Fail safe dry contact output on AC Failure (within one minute).
  • Built-in charger for sealed lead acid or gel cell type batteries.
  • Instantaneous transfer to stand-by battery on AC failure.
  • Battery presence detection (within 1 minute).
  • Battery low disconnect at 9.90VDC or 19.90VDC.
  • High voltage disconnect at 15VDC or 30VDC.
  • Yellow LED (L3) indication for battery disconnected and battery low.
  • Fail safe dry contact output for Battery trouble (Fail Safe).
  • Battery polarity reversal protection.
  • Thermal overload and short circuit protection.
  • DC output PTC activated indication by Red LED (L2).
  • DC output failure indication by Red LED ( L4 ).
  • AC presence indication by Green LED ( L1 ).
  • DC output indication by Red LED ( L5 ).
  • Battery Leads included.
  • Power Board Dimensions: 6.2L x 4.7W x 2.5H.
  • Enclosure Dimension: 17L x 13.5W x 4.75H. Accommodates two
  • 12 Volt 12AH batteries. When using larger batteries, a UL approved enclosure must be used.

    Distribution Board

  • Power input may be either 12VDC or 24VDC.
  • 4 or 8 individually PTC Protected outputs rated 1.6A @ 23C with a maximum of 1.0A @ 49C (not supervised).
  • Total current should not exceed the power supply rating used in the application.
  • Green LED for input power indication.
  • Red LED illuminates to indicate PTC activation.
  • Board Dimensions 4 Output: 4.16 L x 2.6W x 0.8H,
  • 8 Output: 7.5 L x 2.6W x 0.8H

  • Share your knowledge of this product with other customers... Be the first to write a review

    Browse for more products in the same category as this item:

    Shop Brands > Honeywell Power Products > Access Control Power Supplies
    Shop Brands > Honeywell Power Products
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please